Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAccepted-Finance GUNJTHADI TA MAJALGAON DIST BEED | MAJALGAON | BEED | MAHARASHTRA | ₹12.9 L | L1 | Accepted-Finance L1 |
| 2 | Not Admitted-Finance | - | - | Not Admitted-Finance Not qualified for AOC |
| 3 | Not Admitted-Finance | - | - | Not Admitted-Finance Not qualified for AOC |
Tender Value
₹13.0 L
EMD Value
₹12,957
Closing Date
10 Dec 2025, 5:00 pmClosed
Executive Engineer WD.02 Z P Beed
Executive Engineer WD.02 Z P Beed
ZPBEED/WD2/DPDC/113/2025-26
2025_BEED_1255029_1
ZPBEED/WD2/DPDC/113/2025-26
Open Tender
Civil Works
120 days
Beed
Registration Cert., ITR, GST, PAN Card etc As per Tender Conditions
2 documents required · 2 mandatory
₹1,000
₹12,957
28 Apr 2026
3 Dec 2025
11 Dec 2025
3 Dec 2025
10 Dec 2025
3 Dec 2025
Item No. 1 Excavation for foundation in earth. Soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area stacking and spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and structting etc. complete.(Lift upto 1.50 Metre l.NO.21.02 - P.NO.187
Item No, 2 Excavation for foundation in Hard Murum including removing the excavated material upto a distance of 50 m. beyond the building area stacking and spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and structting etc. complete.(Lift upto 1.50 Metre) (l.NO.21.06)
Item No. 3 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit,
Item No.4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundatibn and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SR.NO.24.01, P.NO.107
Item No. 5 providing and laying in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations ike raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Formwork, cover blocks compaction and curing roughening the Surface ifspecial finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant With Natural Sand (I.NO.25.11 -
Item No, 6 providing and casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Natural sand. (SR.NO.25.31, P.NO.224)
Item No. 7 Providing & casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface ifspecial finish is to be provided & curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).,.. With natural sand. (I.NO. 27.01 , P.NO,246 ,
Item No. 8 Providing masonry with conventional / Indian standard type bricks in cement mortar 1:6 in foundation and plinth of inner wall' / in plinth of external walls including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. (I.NO. 27.01 , P.NO,246 )
Item No. 9 providing and Filling in pinth and floors with contractor's soil, sand or murum in 15 cm. to 20 cm. layers including watering and compaction etc, complete. Spec NO.: Bd.A. 11 Page No. 263
Item No. 10 providing and casting in situ cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the,formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. (1.NO.25.70, P.NO.227)
Item No. 11 Providing & casting in situ cement concrete M-20 oftrap/granite/ quartzite/ gneiss metal for RC.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)..., With natural sand. (I.NO, 26.05 ,
Item No,12 Providing and fixing in position TMT - FE - 500 barreinforcementofvarious diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase; newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs ( SR.N0,26.33 , P.N0.236
Item No.13 Providing masonry with conventional / Indian standard type bricks in cement mortar 1:6 in SUperstructure including strikig joints, racking out joints and watering and scaffolding complete. (1.NO.27.05, P.NO.246)
providing Item No. 14and fixing frame with / without CU.M ventilator ofsize as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of 6320.00 size 300mm x 40mm x 5mm with oil painting, etc. complete. J,NO 39.02
providing and fixing factory made panelled door shutter in single leaf 35 mm thick style and rail without ventilator with CCTW panels 12 mm thick including wrought iron hold fast 14780.00 and stainless steel fixtures with oil painting 3 coats etc. complete. ( I,N0.39.13 )
Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window ofthree tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt., Top and side track section 92 x 31,75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt Inter locking section 40 x 18 x 1.10 mm 37541.00 at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer- in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and
Item No. 17 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/ Sqm. As per 22648.00 drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete
Item No. 18 Providing internal cement plaster 12mm. thick in two coat in cement mortar 1:5 without neeru49582.00 finish to concrete, brick surface, in all positions including scaffolding and curing corhplete using pozzolana cement. etc. I.NO 32.03
Item No. 19 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using Waterproofing compound at 1 kg per cement bag curing the same for not less han 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etccomplete. l.N0 32.11 261
Item No. 20 providing and fixing Vetrified mirror / glossy Finish decorative type tiles of size 590 mm to 605 mm X 590 mm to 605 mm. in size about5 to 8 to 10 mm. thick and confirming to IS 15622 2006 ( Group Bla ) for flooring in required positions on plaster of 1.4 cement mortar filling joints with white cement slurry, curing and
Item No. 21 Providing and fixing Vetrified mirror / glossy Finish decorative type tiles of size 590 mm to 605 mm X 590 mm to 605 mm, in size about5 to 8 to 10 mm. thick and confirming to IS 15622 2006 ( Group Bla ) in required positions on plaster of 1.4 cement mortar filling joints with white cement slurry, curing and cleaning complete. b) skirting ( I.NO. 33.41 )
Item No. 22 Providing and applying white wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down complete. ( l.NO.36.02 ,
Item No. 23 Providing and fixing Orissa Pattern type white glazed earthenware 580 X 440 mm. water closet pan, including trap cast iron soil and vent pipes upto the outside face ofthe wall, 1:2 lime concrete / 1:5:10 cement concrete bedding etc. complete. (As directed by Engineer in charge.).
providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 30 cm x 30 cm confirming l.S.15622/2006 (group D Il-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. IINO 33.24
Item No. 25 Providing and laying ceramic tiles of RAK/Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 30 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. I.NO 33.25 P.NO. 269
Item No. 26 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. I.NO 42.55
Item No, 27 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters l.N0 42.53 P.NO.
Item No. 28 SQ.M Providing and fixing 15 mm. diameter screw down bib/ stop tap of brass includi ngnecessary socket union nut complete. (conforming to I.S, 781) Spec.No.: Bd.V, 8 Page 554 1.N0 41.40 P.NO. 337
Item No. 29 providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frdme with chamfer conforming to IS. 6524-1983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm. I.NO 39.56 P.NO. 321
Item No. 30 providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) ithout ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. ( l.NO.39.58 , P.NO. 321 )
Item No. 31 Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete oundation 1:2:4 cement concrete channels halfround G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover. I.NO 42.12
Item No. 33 Providing and laying in position PVC stabilized 100 mm, outer diameter for soil / waste pipe including necessary fitting such as P.V.C. bends with door tee with door single junction with door double junction with door P.V.C. clamps, nails rubber ring and making all connections I.NO 42.52 P.NO. 350
Item No. 34 Providing and fixing white glazed earthenware wash Hand Basin of 55 cm. X 40 cm. size including single cold water pillar tap/brackets, rubber plugs and brass chain, stop tap and necessary P.V.C, pipe connections including P.V.C. waste pipe and without bottled trap upto the outside face of the wall, Spec. No.:Bd.V.30 Page No. 565 ( Item No.41.63, Page No. 339 )
Item No. 35 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface (excluding the primer coat) complete. ( I.NO.36.12 ,
Item No. 36 Providing and applying three coats ofwater proof cement paint ofapproved manufacture and ofapproved colour to the plastered surfaces including scaffolding if necbssary, cleaning and preparing the surface, watering for two days complete. (excluding primer coat) com lete. l.NO.35.15 P.NO.287
Item No. 37 Dismantling thc R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking thein within the specified lead as directed etc. complete.(l.NO.46.29 -P.NO.372)
Item No. 38 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 nun thick including skirting joints and cleaning etc. complete ( SR.NO.33.51 , P.NO.280
Item No. 39 Providing cast in situ M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer with SCADA with natural sand etc. [ D.S.R. I.No.11.29, P.IIO I
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.89 MB
SBD113.pdf
Tender Documents • 3.41 MB
BOQ_2163499.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid