DEFPROC

Active

Works

Civil Works

PROVN OF CERTAIN MINOR WORKS AT TECHNICAL AND DOMESTIC AREA UNDER AGE (I) AF AMRITSAR

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

ASSISTANT GARRISON ENGINEER (I) AF STN AMRITSAR | Amritsar, Punjab

Amount: ₹6.5 LCloses: 26 Oct 2026

Timeline

Published5 Oct 2026
Submission Opens19 Oct 2026
Closes26 Oct 2026
Bid Opening2 Nov 2026

Tender Value

₹6.5 L

EMD Value

₹13,010

Closing Date

26 Oct 2026, 6:00 pm

Tender Inviting Organisation

Name

ASSISTANT GARRISON ENGINEER (I) AIR FORCE AMRITSAR

Address

ASSISTANT GARRISON ENGINEER (I) AIR FORCE AMRITSAR

Work Description

PROVN OF CERTAIN MINOR WORKS AT TECHNICAL AND DOMESTIC AREA UNDER AGE (I) AF AMRITSAR

Tender Information

Tender ID

2026_MES_792422_1

Reference Number

AGE (I) AF/ASR/T-36/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

120 days

Location

ASSISTANT GARRISON ENGINEER (I) AF STN AMRITSAR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS per tender documents

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredAPPLICATION AND SCANNED COPY OF TENDER FEE AND EMD (.pdf)

RequiredSCANNED COPY OF MES ENLISTED LETTER AND RENEWAL LETTER (.pdf)

RequiredSCANNED COPY OF PROVIDENT FUND NUMBER (.pdf)

RequiredPOLICE VERIFICATION REPORT FOR ENLISTED CONTRACTOR (.pdf)

RequiredSCANNED COPY OF ELIGIBILITY CRITERIA OF UNLISTED CONTRACTOR (.pdf)

RequiredSCANNED COPY OF GST REGISTERATION NUMBER (.pdf)

Finance

RequiredFINANCIAL BID SCHEDULE A (.xls)

RequiredGENERAL DOCUMENTS (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

AGE (I) AF AMRITSAR

EMD Fee Amount

₹13,010

Important Dates

Last Activity

5 Oct 2026

Published

5 Oct 2026

Bid Opening

2 Nov 2026

Download Starts

5 Oct 2026

Download Ends

26 Oct 2026

Submission Starts

19 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (54 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Cutting out bricks, forming toothing for, and bonding new into old work in cement mortar 1:4 including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) complete all as specified and directed .	5	Sqm	-	-
2	M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thk walls built in CM 1:4 complete all as specified and as directed.	28	Sqm	-	-
3	M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement including taking down complete all as specified and directed by Engr-in-charge	60	Sqm	-	-
4Material and labour for preparation of new plastered surfaces of walls and applying two coats of 1st quality acrylic distemper(ready mixed) havingVOC content less than 50gms/litre over and including 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish over a coat of primer, complete all as specified and directed.
5	M&L RCC (nominal mix) type B-1 1:2:4 using 20mm graded aggregate in roof slabs supported on walls, beams and columns etc./complete all as specified and as directed by Engr-in-charge.	1.8	Cum	-	-
6	Material and labour for Formwork to sides and soffits of roof beams, lintels, cantilever, shelves, splay between floor and beam etc., flat fair finished concrete surfaces, complete all as specified and directed.	20	Sqm	-	-
7	S&F mild steel TMT bars 10mm dia and over cut to length bent to shape reqd, incl cranking bending spirally for hooping for col,hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips qty confirming to Fe-410W(Gde- E-250) or Fe-290(Gde-E-165) complete all as specified and as directed.	201	Kgs	-	-
8	M&L Framed work such as grills, gratings , etc with ends of bars shouldered and/or riveted, or forged into spikes; framed gaurd bars;barred iron doors ;ladders; framed balusters;walk ways;railings; frameworks of water tanks and similar work conforming to Fe 290.Gde-E-165 for portions framed and hung as gates , including hand made sliding bolts etc in doors or gates of angle or other section with gusset plates, rails, braces, etc., fixing complete all as specified and directed by EIC.	180	Kgs	-	-
9	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain/decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete all as specfied and directed by Engr-in-Charge .	24	Sqm	-	-
10	S&F 250 mm ISI marked in size aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete and fixing clips of sheet cast or extruded sections and fixed complete all as specified and as directed.	16	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.58 MB

Work Item Documents

genpages.pdf

Tender Documents • 1.60 MB

BOQ_888514.xls

BOQ • 0.99 MB

appendixb.pdf

Additional Documents • 0.90 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Cutting out bricks, forming toothing for, and bonding new into old work in cement mortar 1:4 including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) complete all as specified and directed .

Sqm

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thk walls built in CM 1:4 complete all as specified and as directed.

Sqm

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement including taking down complete all as specified and directed by Engr-in-charge

Sqm

4Material and labour for preparation of new plastered surfaces of walls and applying two coats of 1st quality acrylic distemper(ready mixed) havingVOC content less than 50gms/litre over and including 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish over a coat of primer, complete all as specified and directed.

M&L RCC (nominal mix) type B-1 1:2:4 using 20mm graded aggregate in roof slabs supported on walls, beams and columns etc./complete all as specified and as directed by Engr-in-charge.

1.8

Cum

Material and labour for Formwork to sides and soffits of roof beams, lintels, cantilever, shelves, splay between floor and beam etc., flat fair finished concrete surfaces, complete all as specified and directed.

Sqm

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape reqd, incl cranking bending spirally for hooping for col,hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips qty confirming to Fe-410W(Gde- E-250) or Fe-290(Gde-E-165) complete all as specified and as directed.

201

Kgs

M&L Framed work such as grills, gratings , etc with ends of bars shouldered and/or riveted, or forged into spikes; framed gaurd bars;barred iron doors ;ladders; framed balusters;walk ways;railings; frameworks of water tanks and similar work conforming to Fe 290.Gde-E-165 for portions framed and hung as gates , including hand made sliding bolts etc in doors or gates of angle or other section with gusset plates, rails, braces, etc., fixing complete all as specified and directed by EIC.

180

Kgs

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain/decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete all as specfied and directed by Engr-in-Charge .

Sqm

S&F 250 mm ISI marked in size aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete and fixing clips of sheet cast or extruded sections and fixed complete all as specified and as directed.

Each