Improvement Works to Ground Floor Eastern Wing, East of Adm. Building and Toilets at East side at TTPS

Providing wooden platform with scaffolding arrangement using 10 to 13cm dia Casurina posts and 40mm thick country wood planks for providing platform over the scaffolding including cost of all materials labour, lead, lift etc., complete.

Dismantling the existing RCC for the required width & depth as per the instructions of engineer in charge including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing RCC 1:1.5:3 75mm thickness using OP cement with 6 to 10mm chips including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work

Providing RCC 1:1.5:3 using OP/PP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Supplying & providing RTS/MS rod including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, curing, etc. complete.

Providing centering and shuttering arrangements for supporting the reinforced cement concrete surfaces rate including cost of all labour, lead, lift, tools etc., complete.

Clean removal of cement plaster from walls including cost of all materials, labours, lead, lift, curing, etc. complete.

Plastering with C.M 1:3, 12 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete.

Plastering with C.M 1:5, 12 mm thick for inner surfaces including cost of all materials, labours, lead, lift, scaffolding, curing, etc. complete.

Dismantling the existing Floor tiles including cost of all materials, labours, lead, lift, curing, etc. complete.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg/ sq.m etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing dadooing wall with glazed tiles of approved make first quality printed design and colour of 150 x 150mm with 6mm thick laid in CM 1:2, 10mm thick and pointing with white cement of 0.4 Kg/ Sqm including cost of materials labour, lead, lift, etc., complete.

White washing one coats with shell lime including cost of all materials, labours, lead, lift, scaffolding, curing, etc. complete.

Providing two coats of Acrylic distemper of approved quality, brand & colour for old ceiling & inner wall surfaces including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Supplying and providing 6mm wired glass for windows after replacement of damaged glasses including fixing all other accessories such as 8mm U channel screws glass putty including cost of labour charges lead lift etc., complete.

Varnishing the existing wood work with approved quality two coats including cost of all materials, scaffolding charges, labours, lead, lift, etc. complete.

Replacing the worn out water closet and fixing new Indian Water closet of approved quality and colour and size 580x440mm with 'P' or 'S' trap and foot rest including cost of all materials, labours, lead, lift, curing, etc. complete.

Replacing the existing Water Closet and Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 12.5 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.

Supplying and fixing of Porcelain Urinal with all accessories such as 32mm dia. Bell mouth, PVC connection, 15mm dia. GM wheel valve, 15mm dia. B class GI waste water pipe, 15 mm dia nylon connection, 15mm dia. brass nipple, etc. including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and fixing White wash basin 550x400mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug & chain, 32mm dia. B class G.I wasre pipe, 15mm dia. G.M wheel valve, 15mm dia. neylon connection, 15mm dia. brass nipples, 15mm C.P pillar tap, mirror including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying & fixing of PVC pipe of 110mm dia. 6 kg/cm2 with necessary specials for sewer line downfall pipe (water line) and finishing the groove surfaces with plastering in C.M 1:2 mix including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying & fixing of PVC pipe of 160mm dia. 6 kg/cm2 with necessary specials for sewer line downfall pipe (water line) and finishing the groove surfaces with plastering in C.M 1:2 mix including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing two legged scaffolding for works above 3m. heights (inner walls), using 13 to 15 cm. dia. casuarina props, the distance between the two rows being 1.25m. and the spacing of posts being 2m. in both the rows with two horizontal posts with 0.5m. overlap on either side and braces at 2m. c/c including longitudinal & transverse middle braces to stepup and providing a platform with country wood planks of 40 mm. thick & 1m. width, etc. including cost of all materials, labours, lead, lift, safety measures, etc. complete.

Brick work in CM 1:5 using class II bricks including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing Quarry Rubbish including cost of all materials, labour, lead, lift, hand packing consoldation by watering with plastic state etc., complete.

Providing PCC 1:2:4 using OP/PP cement with 12 to 20 mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete.

Supplying and fixing of PVC panneled door shutters hollow type 200 mm x200 mm panel with 1 mm wall thickness for panels and styles and rails of suitable size with 2 mm wall thickness suitably reinforced using MS angle/ Flat including cost of necessary Aluminium Hinges and other Furniture fittings.

Providing two coats with ready mixed plastic emulsion (exterior walls) of first class quality paint & approved colour over a priming coat including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Carefull dismantling of aluminium glazed doors, complete overhauling with replacement of wornout/ damaged spares and refixing in proper condition including cost of labour charges lead, lift etc., complete.

Painting two coats with ready mixed enamel paint for the existing steel grill including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Painting two coats with ready mixed enamel paint for the old/wood surfaces including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.

Dismantling of wooden partition/ Door/ Aluminium Partition including cost of labour, lead, lift, etc., complete.

Supplying and fixing of new wooden partition with country wood scantling of finished size 0.04x0.052m at 0.90m C/c with MDF board of 12mm thick both side melomine finish including cost of all material, labour, lead, lift, scaffolding charges, fevicol, nails, screw and GI 'L' 3" length required MS Flat etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi hambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Providing two coats with ready mixed plastic emulsion (interior walls) of first class quality paint & approved colour over a priming coat including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete