REPAIR TO COMPOUND WALL, DRAINS, FENCING AND HARDSTANDING IN AOR OF AGE B/R-I AND CERTAIN REPAIRS TO E/M INSTALLATIONS UNDER AOR OF GE (WEST) JRC

Amount

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level complete .

Demolition of brick or stone masonary built in cement mortar complete

Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc

M&L brick work with sub-class 'B' old size bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6.

M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as spd and directed

M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, hard standing,Manhole, drain etc.

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls.

M&L machine pressed precast coloured concrete coloured interlocking paver blocks any shape and size confirming of IS 15658: 2006 of 60mm thick , M-35 laid and jointed with grey cement and pigment. Make :SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, Shino tiles, R N Tiles & Pavers or any equivalent approved make

M & L for 25mm thick Sand filling under floors or in foundations including watering and consolidation

M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in kerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work.

M&L 10mm thick rendering in CM 1:3 on brick/concrete surface as in ceiling and finishing the surface even and smooth with out using extra cement.

M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.

M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.

Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises

M&L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in CM 1:4.

M/L Non skid Coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exce 0.11 SqM but not exceeding 0.18 SqM in floors etc, set and jointed in neat cement slurry and pinted in white or coloured cement to match with including 15mm thick screed bed in CM 1:6.

M&L Machine cut kota stone slab (600 x 600 mm size) flooring 20-25mm thick over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto mirror finished complete.

M&L Machine cut kota stone slab flooring 20-25mm thick as in skiritng, riser of steps etc laid over 10mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto mirror finished complete.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings n.exc 1.5sqm each

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm n.exc 4 sqm each

Taking down shutters any description exc 1 sqm but n.exc 2sqm each and all as specified and directed

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 125 x60mm

M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in filling of pressed steel frame, hold fasts and similars articles

Dismantling structural steel work including doors, gates but excluding framed truss etc

S&F for framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering for door or guard bar to be prepaired for hanging or sliding with and including either hooks and hinges or steel hanging sheeting or other covering running rails and guides) and hanging also for Fe 410-W (Gde-E-250) quality A complete all as spd.

S&F 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers.

Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube

S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

Steel window/ventilator 1.25 mm thick Box type ERW hollow P section of size 60mm x 25 mm single rebated comprises skelton shutter ERW Sec 50 MM x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T-section 20 mm x 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1, including shop coat primer and following fittings welded to shutters:-i) Hold fasts 150 mm long,12mm x 3mm made to shape -04 No’s, (ii) Handle of Z sec 20mm x 25mm , 100mm long per leaf -1 No’s (iii) MS tower bolt 150 mm long per leaf -2 No’s (iv) Z sec 20mm x 25 mm , 100 mm long stopper per leaf -1 No (v) Cleat 55 mm long of hollow square 15mm x 20mm x 63 mm welded to hinges per leaf -01 No (vi) MS pintal hinges of size 75mm x 12 mm per leaf -02 Nos (vii) Fabrication and fixing arrangement complete

Ditto as per description of item No 31 above but glazed shutter.

S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and avg erage with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified.

Supply only Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and any width of aparture 1.18mm fixed with alu wire staples fixed to wood/steel frames.

S&F Butt hinges, medium weight cold rolled 100 mm size ISI marked.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size

S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

S&F 15mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed.

Refixing 15mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)

S&F 20 mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed.

Refixing 20 mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)

Dismantiling of water tanks of capacity exc 250 & n exc 500 ltrs incl all necessary fittings complete.

S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I

S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair

S&F ball float valve PTMT with epoxy coated aluminimum rod for 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe.

S&Fin repair 15mm dia Bib taps cast copper alloywith fancy type chromium lated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule

S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs.

S&F 15mm dia Brass stop valves chromium plated, fancy type,screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as specified and fixed in repairs.

S&F in repair 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets &32mm waste coupling complete all as specifed and directed.

S&F Vitreous China Water closet (Squatting pattern) "Orissa Pattern" size 580x 440 mm white with 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) in repairs completee

S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern in repairs

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified

Supply and fixed chromium plated Soap dish, any type fixed to walls with plugs with chromium plated brass screws

S&F for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as spd and directed.

S&F brass chromium plated shower rose 125mm size complete all as spd and directed.

Taking down existing water proofing from roof slab and cleaning the roof slab incl scrapping of existing loose concrete from roof top and washing with water com-plete all as specified and directed.

M&L for PCC padding with cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) to top surface of slab in slope 1:40, finishing the surface complete

M&L 10mm thick rendering on top of roof slab in cement mortar 1:4 by using water proofing compound @3% by the weight of cement, finishing the surface even and fair without using extra cement.

Supply only integral water proofing compound.

M&L for priming surfaces with bituminous primer polymerised primer oil based @ 0.40kg per Sqm.

M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per sq mtr including cleaning surfaces.

M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 10 cm finally it will be finished with a coat of aluminium paint @0.200 Kg/Sqm as per manufactures instruction complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

Cleaning/Roughening surfaces of old concerete floor/roof by picking , sweeping clean and washing down with water to romove the dust etc complete all as spd.

M&L for PCC padding with cement concrete type C-1, 1:3:6 (using 12.50mm graded stone aggregate) to top surface of slab in slope 1:40,finishing the surface even and fair without using extra cement comlete all as specified.

M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 10 cm complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Dismantling of cast iron or reinforced concrete drain pipes of size 100mm dia, jointed in cement mortar and taking out of trenches, if required.

M&L 75mm PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete all as spd and directed

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls

S&F110mm PVC (SWR) bends

S&F75 mm PVC (SWR) bends

S&F110mm PVC (SWR) junction single, (Single T) equal or unequal

S&F110 to 75 mmPVC (SWR) reducers

S & F for PVC 110mm (SWR) vent cowl

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight n. exc. 4kg per Sqm

Dismantling wrought iron or mild steel work of any description not otherwise provided for (as in barbed wire fencing).

Excavation in post holes each nexc 0.50 cum , getting out, returning filling in and ramming earth or broken rubble mixed with earth in layers not exceeding 25cm in soft/loose soil

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregates ) lean concrete as in foundation, filling and mass concrete of post complete all as specified .

S&F galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and including provision of galvanized mild steel wire complete all as specified. (Note :- Each line shall be measured and paid for separately).

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cills, PCC blocks, coping, seismic and other similar bands, plinth bend/beam, etc including weathering slightly rounded or chamfered angles and throuting , including necessary form work etc all as specified.

M& L for MS work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M & L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde E-165)

M & L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

Supply only chain link MS galvanised fencing any size and any type complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F of sign board, duly written with pump house number, location and GE (west) front display made out of flex board mounted on cuboid shaped frame of required size and made out of MS angle 50x50x3mm/25mm x 25mm squere tube with applying two coat of synthetic enamelled paint over one coat of red oxide primer and other 5 sides covered with alluminium composite panel sheet 1.16 mm thick. The display board totally enclosed with stainless steel 304 grade pipe 25mm bore frame and mounted on including provision of 02 Nos stainless steel 304 graded 50 mm bore each 5 mtr length embended with providing hold fast, including excavation of 0.45 x 0.45 mtr and PCC (1:3:6) in mass concrete 75 cm depth under the ground level and incl provision of LED tube light fitting as required for effective illumination and connecting with nearest light point by providing PVC insulated 2 core, 1.5 sqmm copper cable of required length complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc for shafts, wells, cesspits , manholes pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returing, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil.

Removing excavated material n exc 50 m depositing where directed at a level n exc 1.5m above the starting point complete all as specified.

Demolition and breaking up drain pipes 150mm bore (salt glazed ware, AC or Reinforced) set in cement mortar all as spd and directed

M &L for 150mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as spd and directed

M&L for concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1,smooth finished and reforming benching

Demolition of re-inforced cement concrete as in beam /Slab and similar suspended work complete.

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks ,drain,covers including all form work and setting in CM 1:4 all as specified and shown on drgs.

M&L mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips

M & L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge.

M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge.

M & L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge.

M&L for applying one coat of synthetic enamel paint to steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint.

M & L for applying one coat of synthetic enamelled paint including preparation of old decorated steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge

M & L for applying white wash of 3 coats as in ceiling incl preparation newly plastered surfaces as specified and directed.

Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil distemper over one coat of chalk whitening complete all as specified.

Complete removal of existing treatment on wall and applying Two coat of Oil distemper (white or tinted) on one coat of thin layer of putty , on plastred surfaces, prepara-tory to distempering on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces on walls and applying two coats of cement base paint over one coat of cement primer complete all as specified.

Complete removal of existing treatment on wall and applying two coats of cement base paint over a coat of cement primer complete all as specified. and as directed by Engineer-in-Charge.

Dismantling of fencing wire mesh any type and size complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

All as per Ser Item No 4.00 here-in-before but except bricks.

M & L for preparation of old surface of walls and applying one coats of cement base paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and painting one coat of synthetic enamel paint in tint as directed all as specified.

M & L chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6,complete all as specified

M& L for Providing precast cement concrete louvers and jallies type B0 1:2:4 , 25 mm thick set in CM 1:4 (measured solid), including all mouldings but excluding frame and complete all as specified and as directed .

Add or deduct from item no 126 above for each 10 thickness or part there of over 25 mm thick .

Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification given on page 162 of SSR-2010 Part-II for solid PVC wall lining including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.and including dismantling of doarding of any discription complete all as specified and directed.

R R Traders

M/s Sanjiv Kumar

KAMALJIT SINGH CONTRACTOR

PAUL CONSTRUCTION CO.

Dee Kay EnterPrises

M/s Nirmal Singh and Co.

H K CONSTRUCTIONS

nitin trading company

M/S Kuldip Construction Co.

R.S.ENTERPRISES

B.P CONSTRUCTION CO

G S TRADERS

NATIONAL BUILDERS

S S BUILDERS