REPAIRS AND REPLACEMENT OF METER PANEL BOX, MCCB AND CONNECTED ITEMS UNDER GE (WEST) COLABA, MUMBAI

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and and getting out in soft loose soil all as specified and directed.

All as per item No.01 above but in hard dense soil.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 in depth and getting out in hard rock/road cutting/RCC/PCC all as specified and directed.

Supply and providing crushed stone sand for sand cushioning for cable protection or filling in trenches of sand in cable ducts after cleaning of ducts all as directed and specified Note:. for the purpose of payment only punned thickness will be measured.

Returning, filling in soft/loose soil including spreading, levelling, watering, well ramming in layers n.exc 25 cm all as specified and directed.

Removing excavated material of soil/rock not exc. 50m away from starting point and depositing where directed at a level not exc. 1.5 m above the starting point all as specified and directed.

Removing of excavated material upto 15 KM from the site of work and transporting out side of MD land all as specified and directed.

Supply and providing unreinforced pre cast cement concrete cable cover for cable protection (Ready made Covers) of sizes Class LV type I, flat size 250x150x40 mm putting adjecent to each other all as specified and directed.

Taking down or up old unsereviceable cable of any size from pole/ wall/roof/trenches all as specified and directed.

Taking down carefully copper/aluminum submain wiring including all fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings, etc. and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with the existing surfaces all as specified and directed

M&L in repairs for fabrication work with Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specifeid and diredted.

Supply, install, testing and commissioning of LT panel meter cabin panel indoor type, mounted on angle iron frame made out from size 40x40x5 mm grouted on floor, cubical indoor type for 415V, 3 phase, made of 2 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 150 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new installed panel with provisions of thimble/lugs and necessary frame work and PCC foundation including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surface all as specified and directed comprising of the following :- (a) MCCB, FP, 100 Amps 36 kA- 01 Nos. Make- Legrand / Schneider / L&T (b) MCB 63 Amps, 10KA, C series - 04 No . Make- Legrand / Schneider / L&T (c) Street Light Time Switch analog type - 01 No (d) Power contactor 3 pole AC3 rating 25 A - 01 No (e) Copper Bus bar, 250 Amps Rated - R,Y,B & N (f) Digital Ammeter-01 No (g) Digital Voltmeter-01 No (h) Phase indicator lamp R,Y & B (i) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 04 Nos. (j) M&L for 2 core 16 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.

Supply, install, testing and commissioning of LT panel indoor with closing door meter cabin panel with locking arrangement mounted on angle iron frame 40x40x5 mm grouted on floor, cubical indoor type for 415V, 3 phase, made of 2.0 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 200 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new insalled panel with provisions of thimble/lugs and necessary farmwork and PCC foundation including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surfaceall as specified and directed comprising of the following :- (a) MCCB, FP, 125 Amps 36 kA- 01 Nos. I/C Make-Legrand / Schneider / L&T (b) MCB 40 Amps, 10KA, C series - 11 No . Make-Legrand / Schneider / L&T (c) Copper Bus bar, 200 Amps Rated - R,Y,B & N (d)Digital Ammeter-01 No, Make-HPL ,SP CL-1.0/AE (e)Digital Voltmeter-01 No Make-HPL ,SP CL-1.0/AE (f) Phase indicator lamp R,Y & B (g) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 11 Nos. (h) Material and labour for 2 core 10 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.

Supply, install, testing and commissioning of LT panel indoor with closing door meter cabin panel with locking arrangement mounted on angle iron frame 40x40x5 mm grouted on floor, cubical indoor type for 415V, 3 phase, made of 2.0 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 150 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new insalled panel with provisions of thimble/lugs and necessary farmwork and PCC foundation including shifting of existing panel if any making arrangement for fixing of panel and making good to disturbed surface all as specified and directed comprising of the following :- (a) MCCB, FP, 100 Amps 36 kA- 01 Nos. I/C Make-Legrand / Schneider / L&T (b) MCB 40 Amps, 10KA, C series - 9 No . Make-Legrand / Schneider / L&T (c ) Copper Bus bar, 150 Amps Rated - R,Y,B & N (d)Digital Ammeter-01 No, Make-HPL ,SP CL-1.0/AE (e)Digital Voltmeter-01 No Make-HPL ,SP CL-1.0/AE (f) Phase indicator lamp R,Y & B (g) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 9 Nos. (h) Material and labour for 2 core 10 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.

Supply, install, testing and commissioning of LT Panel indoor with closing door meter cabin panel with locking arrangement mounted on angle iron frame 40x40x5 mm grouted on floor, cubical indoor type for 415V, 3 phase, made of 2.0 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 100 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new installed panel with provisions of thimble/lugs and necessary frame work and PCC foundation including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surface all as specified and directed comprising of the following :- (a) MCCB, FP, 63 Amps 36 kA- 01 Nos. I/C Make-Legrand / Schneider / L&T (b) MCB 40 Amps, 10KA, C series - 7 No . Make-Legrand / Schneider / L&T (c) Copper Bus bar, 100 Amps Rated - R,Y,B & N (d)Digital Ammeter-01 No, Make-HPL ,SP CL-1.0/AE (e)Digital Voltmeter-01 No Make-HPL ,SP CL-1.0/AE (f) Phase indicator lamp R,Y & B (g) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 7 Nos. (h) Material and labour for 2 core 10 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.

Supply, install, testing and commissioning of LT Panel indoor meter cabin panel mounted on angle iron frame 40x40x5 mm grouted on floor,cubical indoor type for 415V, 3 phase, made of 2.00 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 300 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new insalled panel with provisions of thimble/lugs and necessary farmwork and PCC foundation including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surface as directed comprising of the following :- (a) MCCB, FP, 200 Amps 36 kA- 01 Nos. I/C Make-Legrand / Schneider / L&T (b) MCCB, FP, 80 Amps 36 kA- 02 Nos.(O/G) Make-Legrand / Schneider / L&T (c) MCB 40 Amps, 10KA, C series - 9 No . Make-Legrand / Schneider / L&T (d) Sheet metal enclosure 2 way without bus bar - 11 No, Make-Legrand / Schneider / L&T (e ) Copper Bus bar, 300 Amps Rated - R,Y,B & N (f)Digital Ammeter-01 No, Make-HPL ,SP CL-1.0/AE (g)Digital Voltmeter-01 No Make-HPL ,SP CL-1.0/AE (h) Phase indicator lamp R,Y & B (i) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 9 Nos. (j) Material and labour for 2 core 10 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.

Supply, install, testing and commissioning of LT indoor meter cabin panel mounted on angle iron frame 40x40x5 mm grouted on floor, cubical indoor type for 415V, 3 phase, made of 2.00 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 150 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new installed panel with provisions of thimble/lugs and necessary frame work, excavation & earthwork, PCC foundation including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surface as directed comprising of the following :- (a) MCCB, FP, 100 Amps 25 kA- 01 Nos. I/C Make-Legrand / Schneider / L&T (c) MCCB, FP, 63 Amps 25 kA- 01 Nos.(O/G) Make-Legrand / Schneider / L&T (d) MCB 40 Amps, 10KA, C series - 13 No . Make-Legrand / Schneider / L&T (e) Sheet metal enclosure 2 way without bus bar - 11 No, Make-Legrand / Schneider / L&T (f ) Copper Bus bar, 200 Amps Rated - R,Y,B & N (g)Digital Ammeter-01 No, Make-HPL ,SP CL-1.0/AE (h)Digital Voltmeter-01 No Make-HPL ,SP CL-1.0/AE (i) Phase indicator lamp R,Y & B (j) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 09 Nos. (k) Material and labour for 2 core 16 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.

Supply, install, testing and commissioning of LT panel indoor meter cabin panel mounted on angle iron frame 40x40x5 mm grouted on floor, cubical indoor type for 415V, 3 phase, made of 2.00 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 300 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new installed panel with provisions of thimble/lugs and necessary frame work, excavation and earthwork, PCC foundation including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surface all as specified and directed comprising of the following :- (a) MCCB, FP, 200 Amps 25 kA- 01 Nos. I/C Make-Legrand / Schneider / L&T (b) MCCB, FP, 100 Amps 25 kA- 02 Nos.(I/O) Make-Legrand / Schneider / L&T (c) MCCB, FP, 63 Amps 25 kA- 01 Nos.(O/G) Make-Legrand / Schneider / L&T (d) MCB 40 Amps, 10KA, C series - 13 No . Make-Legrand / Schneider / L&T (e) Sheet metal enclosure 2 way without bus bar - 11 No, Make-Legrand / Schneider / L&T (f ) Copper Bus bar, 300 Amps Rated - R,Y,B & N (g)Digital Ammeter-01 No, Make-HPL ,SP CL-1.0/AE (h)Digital Voltmeter-01 No Make-HPL ,SP CL-1.0/AE (i) Phase indicator lamp R,Y & B (j) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 9 Nos. (k) Material and labour for 2 core 16 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated copper stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 sq. mm X 3 Core in service connections Make : Polycab/ Havells/ Plaza

S&F Sub main wiring in repairs, with two run of 10 sqmm stranded copper conductor FRLS wire with one run of 10 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 25 mm dia) for housing the wires for Main DB to House SPN DB all as specified and as directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduit shall be measured as one length.

S&F in repairs sheet metal enclosure for DB when MCBs to be used 240 volts 2 way single door without bus bar single pole and neutral fixed on wall with the help of MS flat angle iron duly grouted on wall including MS nut and bolts all as specified and as directed.

S&F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repair DB vertical type 4 way TPN double door 415 Volts with 200 Amp rated bus bar including taking out old U/S DB & fixing on the wooden plank 15 mm thick duly grouted on wall by means of Nut & Bolts to insulate the DB from wall all as specified and as directed.

S&F in repair DB vertical type 6 way TPN doubble door 415 Volts with 200 Amp rated bus bar including taking out old U/S DB & fixing on the wooden plank 15 mm thick duly grouted on wall by means of Nut & Bolts to insulate the DB from wall all as specified and as directed.

S&F in repair DB vertical type 8 way TPN doubble door 415 Volts with 200 Amp rated bus bar including taking out old U/S DB & fixing on the wooden plank 15 mm thick duly grouted on wall by means of Nut & Bolts to insulate the DB from wall all as specified and as directed.

S&F in repairs MCB TPN, 35 to 63 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs all as specified and as directed.

S&F in replacement of MCCB 125A, 16kA, 4P, Thermal magnetic release , Ics=100% Icu . Make : Legrand/Siemens/Schneider/ABB

S&F in repairs MCB SP 240 volt, 6 to 32 Amps all as specified and directed.

S&F in repairs MCB SPN, 240 volt, 40 Amps 10 KA all as specified and directed.

S&F in repairs MCB SPN, 240 volt, 63 Amps 10KA all as specified and directed.

Supplying, laying, commissioning & testing LT underground cables 50 Sqmm X 3.5 Core, 1100 Volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi-stranded aluminium conductor all as per IS 7098 (Part -1) laid in trenches, ducts, drawn through pipes or fixed on poles, as and when required on ground all as specified and as directed.

All as per item No 35 above but 35 Sqmm X 3.5 Core

All as per item No 35 above but 25 Sqmm X 3.5 Core

All as per item No 35 above but 16 Sqmm X 4 Core

M&L for snap-on trunking system with cover, angles, bends and all accessories and fitting of size 50x80 mm fixing on wall all as specified and directed.

S&F GI perforated and ladder type cable tray of thickness size 1.5 mm and of size 150 mm X 30mm width and depth including connected other accessories by fixing srewes of adequate size and making good all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 60 cm X 60 cm X 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.50 mtr below normal ground level and connected to GI earth lead strip 25 x 4 mm dia by means of GI bolts, nuts, check nuts, washers made out of GI/steel, all as shown on electrical plate No 3 of MES schedule part-I, earth lead strip connected to indicated position including concrete pit in PCC 1:3:6, type C-1, precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in precast slab and 20 mm bore galvanised iron pipe "medium grade" for watering with GI funnel and wire mess including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion all as specified and as directed.

S&F in repairs earth continuty conductor fixed to wall/surface or recess or burried in ground or any situation for loop earthing by aluminium 25X4 mm GI strip all as specified and directed.

NOEL ENGINEERS

OM SAI POWER SYSTEMS

SHREE JAGDISH FURNITURE CO.

AGRAWAL ASSOCIATES

Bidder Name

AGRAWAL ASSOCIATES

OM SAI POWER SYSTEMS

NOEL ENGINEERS

SHREE JAGDISH FURNITURE CO.

N.S.ENTERPRISES