Repair and Renovation and Face Lifting at PWD (RnB) XEN Quarter Katra

Amount

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead: 1:3:6 or richer mix

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead .

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 fine sand) including all leads, lifts and carriage complete.

Extra for brick masonry in super structure above plinth level upto flour V level including all leads, lifts and carriage complete (By mannual means).

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors,balconies, landings and staircase having upto 15°slope. excluding cost of centering and shuttering ,all work upto floor V level

Reinforcement for RCC work incl. straightening, cutting, bending, placing in position and binding all complete including all leads, lifts and carriages complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63mm for doors, windows and clerestory windows with hinges and necessary screws :Second class deodar wood.

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 1 0mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 0x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

6mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) including all leads, lifts and carriages complete.

12mm thick cement plaster of mix 1:4 (1cement: 4 fine sand) including all leads, lifts and carriages complete.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) including all leads, lifts and carriage complete

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Wall Painting with plastic emulsion paint of approved lj brand and manufacture to give an even shade. Two or more coats on new work

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work.

Finishing walls with Acrylic smooth exterior paint of required shade on Old work (two or more coats applied @ 1.67 litres/ 10 sqm on existing cement paint surface)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100mm

Centering and shuttering incl. strutting, propping etc. and removal of form work for including all leads, lifts and carriage complete:-

Suspended floors, roofs, landing, balconies and access platforms.

Edges of slabs and breaks in floors under 20cm wide.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: Semi Rigid pipe 32mm diameter

Providing and Fixing LED Bulb

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable .arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Providing and fixing Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Engangement of Labour for Xen quarter clearance for side drain, claearance around lawn and Roof Top and Sunshade along the Periphery at Xen quarter

Engangement of Trolly for removing and damped malba including loading and unloading and disposal average lead 3.0 km from Katra City

VED PARKASH PADHA

M/S Mohit Dubey

RAJINDER KUMAR SHARMA

Kaku Ram