SPECIAL REPAIR TO PUMP HOUSE AND POWER HOUSE

Amount

Demoliton of cement concrete (un reinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed.

Taking down cement plaster or cement lime plaster of any description including racking out joints, haking for key , scrubbing down with water etc and prepare to receive new plaster complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc from parapete etc and removal unserviceable brick/brick bats complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 as in parapets etc complete all as specifed and directed.

M&L for 15mm thick rendering in CM 1:4 with using water proofing compound on fair faces of brick or concrete surface complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately under respective items.

M&L for 10 mm thick rendering in CM (1:3) on fair faces of brick work or concrete ceiling surfaces finished even and smooth without using extra cement etc complete all as specified.

M&L for Rendering 15 mm thick on fair faces or brick work or concrete surfaces in cement mortar (1:6) and finished fair and even etc complete all as specified and directed.

M&L for GI wire netting 0.90mm dia and 12mm wire mess lathing to wood or metal studding ,joist in wall, beams, chajjas, celing etc in patches n exc 5sqm each including all laps ,cutting and waste all as specified and as directed by engr in charge

M&L for Rendering 15mm thick in cement mortar CM 1:4 in two layer (First coat 10 mm thick and second 5 mm thick) mixed with water proofing compound @3% by weight of cement (in top layer ) as in window projection/ chajjas / slabs and finished even. (WPC will be measured and paid separetly)

Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S&F in repairs 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls .

S&F in repairs 110mm bore PVC (SWR) bends any radius.

Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof , floors, channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for.

M&L for cleaning the roof surfcae from dust /dirt and any other foreign materials and applying a coat of suitable primer @ 0.30 liters per square meter uniformity after the surfaces fully dried complete all as specified and directed.

M&L For cutting out cracks to v-section in existing roofs or terraciv cleaning grouting with cement and sand slurry 1:3. complete all as specified and directed.

M&L for cutting out cracks to V section in existing roofs or terrace, cleaning out and filling solidly with a hot mixture of bitumen and clen dry sand (1:1) (by weight) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding, benching existing roof slab to slope as per existing or as sirected including finished surface even and fair complete all as specified and directed.

M & L for APP based polymeric water proofing membrane minimum weight 3.6 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.

M&L for rendering 10mm thick in cement mortar (1:4) cover concrete surfaces of roof, mixed with @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) as per manufacturerrs instruction inclduing finishing surfaces even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately). (Note: WPC will be measured and paid separately).

M&L for cement concrete tiles 20cmx20cmx20mm thick machine pressed set jointed and pointed in neat cement slurry in floors and cut polished over roof treatment, laid over and including 15mm thick screed be din cement mortar (1:6) mixed with and including polymer based liquied water proofing additive @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) or as per manufacturers specification and joints of cement concrete tiles shall be filled with cement mortar (1:4) mix with and including 5% curde oil complete all as specified and directed.

Supply only liquid integral water proofing compund. Make Dr Fixit Pidipfoor LW+.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cills bencing and other similar bands, plinth courses, parapets, coping bed plates and the like inclduing weathering, slightly rounded or chamfered angles and throating finishing surface even and smooth as directed inclduing use and waste of form work complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) for plinth protrction etc complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position exc 250 ltr n.exc 500 ltr cap etc complete all as specified and directed.

Demolition of RCC 500/1000 ltr water tank of any description and in any position not otherwise specifically provided for

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks all as specified.

S&F for 20mm dia Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed in repair.

S&F 20mm dia ball valves high pressure of with epxy coated aluminium rod and high density plastic ball screwed for iron pipe and all as specified.

Taking up or down steel water tubing galvanised and removing to store 15 mm dia

Taking up or down steel water tubing galvanised and removing to store 20 mm dia

S&F 15mm dia medium grade galvanized water tubing with all necessary fittings and fixed complete walls.

S&F 20mm dia medium grade galvanized water tubing with all necessary fittings and fixed complete walls.

M&L for Pre-painted galvalume aluminium zinc coating 275 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe 410-W(Gde E-250) quality-A ) etc complete all as specified and directed.

Taking down the cover of existing rolling shutters of gear/manual operated type (area of shutter not exceeding 11 Sqm) carefully and complete overhauling the shutters by applying grease, oil etc in bearings springs guide channels, operating rod etc for smooth and free operation and refixing the cover back in the same position complete all as specified and directed by the Engineer-in-Charge.

M&L for in replacement of tension spring in the shaft of rolling shutters suitable to the rolling shutter and making good the disturbed surfaces to match to the existing gear operated type rolling shutter complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Steel rolling shutter, 1.25mm thick with bal bearing as specified including top cover, anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type including taking down complete all as directed by Engineer-in-charge.

S&F in repairs safety lever lock mild steel with four lever for rolling shutter complete all as specified and directed.

S&F 50mm dia MS pipe heavy grade as in shaft in rolling shutters including taking out old unserviceable pipe complete all as specified and directed by Engineer-in-Charge.

Supply only low level cistern of 10 ltr cap PVC dual flush, symphonic action type , with inlet ball valve and float and handle 32 mm dia including bracket after fixing tiles etc including taking down existing complete all as specified and directed.

Supply and fixing (in Repair) vitreous china wash hand basin, white, flat back, size 550x440mm excluding taps, waste, chain and plug and porcelain stopper but including MS brackets including pTMT waste coupling 32mm and cutting for and pining in ends of brackets complete all as specified and directed.

Supply only 15mm dia pillar taps CP brass with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair including taking out the existing pillar tap complete all as specified and directed.(Weight not less than 450gms).

S&F in repair 15mm dia Bib taps fancy type cromium plated alloy with capstan headed Handle, Screwed down, screwed for Iron pipe or for brass ferrule and fixed.(Weight not less than 350-450gms)

S&F in repair 15mm dia stope valves/angle cock fancy type cronium plated with long shank and cup (cost copper alloy screwed down, high pressure withcrutch or butter fly handle screwed both ends for iron pipe. (Weight not less than 350-450gms)

S&F in repair towel rail 600mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats

S&F in repair 15mm dia PVC connection of length 450mm fixed as in repair including taking out the existing unserviceable complete all as specified and directed.

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

S & F for Glazed ceremic coloured printed tiles of size 450x 300mm x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over 10 mm thick rendering in CM 1 : 4.10mm thick rendering as in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and as directed by the Engineer-in-Charge

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking Colour paver block glazed any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade etc complete etc all as specified and directed.

M&L for 30mm thick sand cushion below inter locking paving tiles including spreading, levelling and compaction complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed layer in CM (1:6) for lying floor finish etc and rubbing and polishing complete etc all as specified and directed.

Taking down Chowkats or frames with shutter not exceeding 1.5 Sqm each (without taking off shutters from the frames)

Taking down Chowkats or frames with shutter exceeding1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames)

Taking down shutters of any description not exceeding 1 Sqm each.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each

Refixing of shutter in the same opening of any description n exceeding 1 sqm each.

S&F 35 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of me-mbers of shutters as specified in SSR Part-I

S&F 35 mm thick factory made shutters, 2nd class Hard woodwood rail and style, plain framed,panelled shutter with out interloking rail with one panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces. The size of rail and stileas per SSR Part-I, kiln seasoned and chemically pressure treated all as specified.

S&F 35 mm Flush shutters, solid construction, with block board core and playwood face panels, commercial type on both side complete all as specified.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing complete

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F for steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and directed.

S&F for Steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified.

M&L for Mild steel work in bands straps,including bolts as in holdfasts and similar articles conforming to Fe-310-0,Fe-410-0 complete all as specified and directed .

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. (in Repair)

Taking down existing aluminium door /windows and re-fixing the same after replacement of rubber beads, lock, door stoper, Handles etc and minor repairs in Hydrolic door stoper or adjustments and refixing the taken glass etc all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Hacking out old broken glass (any thickness and size or quality) from any frames glazed with putty or fixed with beads .

S&F 3mm thick sheet glass ordinary quality glazing with oil putty on metal frame or wooden beads in square n exc 0.5 Sqm in each pane all as specified and directed.

All as per item No. 71 above but 4.8 mm thick tinted glass in square exc 0.5 Sqm in each pane –ditto-

Supply&fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.(In Repair)

S & F 150mm long Aluminium, anodised, barrel tower bolts of extruded section.(In Repair)

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.(In Repair)

S&F in repair 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd complete all as specified and directed

S&F in repair 75mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd complete all as specified and directed

Easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Taking down door shutters and changing of unserviceable existing butt hinges and re-fixing in same opening including welding etc exc 1 Sqm and n.exc 2 Sqm complete all as specified and directed.

S & F 100 mm But Hinges, medium weight cold rolled mild steel and Fixed.

S & F 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S & F 150mm long Aluminium, anodised, barrel tower bolts of extruded section.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

M&L for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint by using roller brush over cement wash with white cement complete all as specified and directed.

M&L for preparation of oldplastered surfaces of walls and applying one coats of cement base paint by complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise, over 10 cm width or girth and one synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces, of any description, not otherwise described, over 10 cm width or girth and applying by roller one synthetic enamel paint complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling surfaces and applying three coats of white wash etc complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall surfaces and applying three coats of white wash etc complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one two of white wash on wall complete all as specified and directed.

All as per item No 94 above but one coat of white wash on ceiling surface complete all as specified and directed

M&L for complete removal of old decorated surfaces ofwall and applying two coat of oil bound distemperover a coat of 1.5mm thick putty all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan/exhaust fan point/calling bell controlled by one Switch.

All as per Srl item No. 98 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and directed .

All as per Srl item No 98 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 98 here-in-before but for one power point 3/5 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

Supply and fixing of switch piano flush type 5 Amps, single pole one way complete, all as specified and directed .

Supply and fixing socket out let 2 in 1, 3 pin, 5A flush type complete, all as specified and directed .

Supply and fixing of switch piano flush type 15 Amps, single pole one way complete, all as specified and directed .

Supply and fixing of Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type. complete all as specified and as directed .

Supply and fixing of ceiling rose, PVC/poleycarbonate type, insulated body,surface type, complete all as specified and as directed .

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as spd and directed..

Supply and fix exhaust fan Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame complete with louvers shutter, incl making hole as per site reqmt and complete with all fixing arrangement and connection complete all as spd and directed.

Taking down carefully existing ceiling fan and M&L for rifixing the same with nuts, with lock type split pin spring & plate washers etc after paining and oiling/greesing as specified and directed.

Supply and fixing MCB distribution board 8 Way double door type with rated copper bus bar and DIN rail to accommodate MCBs complete all as spd and directed .

supply and fix connecting and testing LED street light 35 watt 6000k new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with high efficient led as lighting source and PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 32 mm dia GI pipe as bracket in appropriate length complete.

Supply and fixing MCB, SPN, 32 A ,10KA.

Supply and fixing MCB, SP, 6-32A ,10KA.

Supply and fixing for submain wiring with two single core 4.0 sq mm PVC insulated multistrand copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete. Note:- Two run of 4 sq mm copper cable and one run of 4 sq mm copper cable and one run of PVC conduit shall be measured as one unit.The rates for wiring include for Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. for concealed conduit wiring.

Excavation in trenches/Pits in any type of soil(soft/loose/hard/ dense soil), n.exc. 1.5M wide and n.exc. 1.5M deep and getting out complete, all as specified & directed .

Returning filling in with the earth obtained from Item No 2 here-in-before including spreading, leveling and well ramming in layers n.exc. 25cm thick complete all as specified & directed.

Supply and spreading clean and dry sand (unwashed) in trenches around the cable for cushioning all as specified & directed

Removal of surplus excavated material to a distance n.exc. 50 Mtr and depositing where directed at a level n.exc. 1.5 Mtr above starting point complete all as specified & directed

Supply and laying sub class 'B' bricks (Old Size) laid flat in trenches as cable covers all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 4 core complete all as spd and directed.

Same as items No 121 abvove but for size 25 sq mm 4 core complete all as spd and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel of size 75mm x75mm x 25mm, supplying and laying charcoal stone aggregate) chamber and mild steel angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in drawing SSR part 1 plate no. 3

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Supply & fixing in replacement and testing of bus-bar chamber indoor type single door made of 3.15 mm thick sheet factory made of size 45x30x15 cm fixing inside the existing wall with , 4 Nos copper strip mounted on insulator, 400 Amps, IC, 460 mm long including all incomming and out going connections with lugs of any size,with RYB indicator and PCC work etc. complete all as directed by engr-in-charge.

Supply & fixing or fabricated of SS frame glow sign boards on retrofit sheet size 1500mm x 750mm duly indicating the name of installation and logo of MES with suitable redium stencil and necessary items for fixing on roof /wall grouting/ PCC work complete all as directed by Engr-in-Charge. Note : Background colour sky blue and matter or size of stencil as direction by Enger-in-Charge.

S&F flex board for line diagram of water supply and electric supply fixed on MS angle all as specified and directed by Engr-in-Charge.

S&F flex board for electric shock chart ( not less than size 1000mm x 500 mm) with fixing arrangment to wall all as specified and directed by Engr-in-Charge.

S&F first aid kit box made from GI with red and ivory powder coating of size 325(H)x285(W)x 80(D) mm which is rust free ,corrossion free with front transparent acrylic Glass and multi compartment for better organize of medicine with lock with fixing arrangment to wall including first aid medicine all as specified and directed by Engr-in-Charge.

S&F in replacement of rubber matting of 1 Mtr x 2 Mtr x 15 mm thick with ISI marked for LT panel complete all as directed by Engineer-in-Charge.

S&F of MS fire fighting board (not less than of size 1000 mm x 500 mm & 6 mm thick ) including making hooks/ bracket on board and painting in yellow colour and writing letter on board as instructed by Engr-in-Charge and bricks works required to hold two bucket on ground all as specified and directed.

S & F CEASE FIRE ABC POWDER MAP90 FIRE EXTINGUISHER (4KG) or technically equivalent of capacity 4 KG complete all as specified and directed. Note: Extinguisher is effective against Class A, B and C fires as well as Electrical fires.

S & F Metalic fire bucket painted with red colour and marked with "FIRE" on the bucket of Capacity 10 Ltrs.

S & F Metalic fire beater with wooden handle of 3 mtr long, painted with red colour.

S & F Metalic fire hook with wooden handle of 3 mtr long, painted with red colour.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

Mohit Enterprises

Ambrish Builders

K R GUPTA AND SONS

M/S SATISH KUMAR

M/S R S Traders

Abhinav Builders

chauhan construction

VINAYAKA (INDIA) MULTIFARIOUS SERVICES PVT LTD

Bharat Trading Company