Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹94.8 LAccepted-AOC | ₹94.8 L | L1 | Accepted-AOC L-1 |
| 2 | L2₹95.1 L+₹30,098.73 (0.32%)Rejected-Finance | ₹95.1 L+₹30,098.73 (0.32%) | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | Ms Gokul Construction L2 | M/S M P Verma and Construction L1 |
|---|---|---|---|---|---|
| 1.00 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. | 4,284.7 | M2 | 12.55 ₹53,772.99 | 12 ₹51,416.4 Lowest |
| 2.00 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 158.29 | M2 | 127 ₹20,102.83 | 126.5 ₹20,023.69 Lowest |
| 3.00 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. | 158.29 | M2 | 248 ₹39,255.92 | 245 ₹38,781.05 Lowest |
| 4.00 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. | 1,424.65 | M2 | 219 ₹3,11,998.35 | 217 ₹3,09,149.05 Lowest |
| 5.00 | Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint
surface applied @ 3.28 ltr/10 sqm. | 2,636.21 | M2 | 137 ₹3,61,160.77 | 136 ₹3,58,524.56 Lowest |
| 6.00 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color / wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no.and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficientdrying time for 1st coat and 2nd coat is allowed to dry for 8 to 12hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finergrading with ample water to remove excess sealer layer andmake the surface further smooth after this wet rubbing, thensurface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed todry for 4 to 6 hrs on which again a light wet rubbing is done thissurface is further allowed to dry for 12 hrs. | 132.43 | M2 | 1,105 ₹1,46,335.15 | 1,100 ₹1,45,673 Lowest |
| 7.00 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. | 1,118.12 | M2 | 302 ₹3,37,672.24 Lowest | 303.5 ₹3,39,349.42 |
| 8.00 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and rewwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength | 2.88 | M2 | 4,432 ₹12,764.16 | 4,430 ₹12,758.4 Lowest |
| 9.00 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 2.18 | M2 | 2,833 ₹6,175.94 | 2,830 ₹6,169.4 Lowest |
| 10.00 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: | 2.18 | M2 | 4,091 ₹8,918.38 | 4,090 ₹8,916.2 Lowest |
Tender Value
₹95.2 L
EMD Value
₹1.9 L
Closing Date
21 Jul 2026, 11:00 amClosed
E.E. BCD, Building Division No.-2, Ranchi
E.E. BCD, Building Division No.-2, Ranchi
Renovation of Guest House, Open Theatre and Dispensary, Tiles work at Fountain, Library and Open Terrace, Structre Glazing and External Painting at Recreation Centre in the Campus of Judicial Acadmey at Dhurwa, Ranchi.
2026_BCD_116183_1
10/2026-27 /EE/BCD/DIV NO-02, RANCHI
Open Tender
Civil Works - Buildings
Works
90 days
Ranchi
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹1.9 L
27 Aug 2026
15 Jul 2026
22 Jul 2026
15 Jul 2026
21 Jul 2026
15 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. | 4,284.7 | M2 | - | - |
| 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 158.29 | M2 | - | - |
| 3 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. | 158.29 | M2 | - | - |
| 4 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. | 1,424.65 | M2 | - | - |
| 5 | Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint
surface applied @ 3.28 ltr/10 sqm. | 2,636.21 | M2 | - | - |
| 6 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color / wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no.and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficientdrying time for 1st coat and 2nd coat is allowed to dry for 8 to 12hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finergrading with ample water to remove excess sealer layer andmake the surface further smooth after this wet rubbing, thensurface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed todry for 4 to 6 hrs on which again a light wet rubbing is done thissurface is further allowed to dry for 12 hrs. | 132.43 | M2 | - | - |
| 7 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. | 1,118.12 | M2 | - | - |
| 8 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and rewwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength | 2.88 | M2 | - | - |
| 9 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 2.18 | M2 | - | - |
| 10 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: | 2.18 | M2 | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
F-2-10.pdf
Tender Documents • 3.69 MB
BOQ_157055.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .