Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
9 Nov 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Shri Gaurav Tiwari, IDSE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
REP/ MAINT OF MOTORISE SHUTTER AT OTM BLDGS AND MAINT OF CRAINS AT INS SHIVAJI LONAVLA
2026_MES_794503_1
GE/LONAVLA/8495/E8
Open Tender
Civil Works
Item Rate
180 days
GE (I) (NAVY) LONAVLA
Scanned Copy of APPLICATION Scanned Copy DEMAND DRAFT Scanned Copy of EPF REGISTRATION Scanned Copy ENLISTMENT LETTER Scanned Copy of GST REGISTRATION
6 documents required · 6 mandatory
₹500
Yes
GE (I) (NAVY) LONAVLA
₹50,000
Yes
17 Oct 2026
17 Oct 2026
11 Nov 2026
17 Oct 2026
9 Nov 2026
2 Nov 2026
17 Oct 2026 - 31 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L for replacement of manual cum electrical operation mode by installation of switch gear box for shutter as provided in shutter at site, rolling shutter operator indirect drive Side motor single phase - 1500kw in case of power failure manual drive three way push button with PVC pipe including testing on completion. All as specified and as directed by Engineer -In-Charge . Mtotor Make :- Swiftroll or equivalent JIELONG,ALIBABA | 1 | Each Job | - | - |
| 2 | M&L for maintenance of Electrically Operated Shutter (such as checking of electrical Shutter, greasing, oiling to all movable parts,winding of motor, replacement of worn out gears and gear box, replacement of main shaft , replacement of wornout chain etc.) and preventive maintenance (such as Scrubing of existing rusted surface,cleaning , prepration and painting of surfaces with one coat of red oxide and two coat aliminium paint for fine finishing complete all as specified and as directed.. | 6 | Each Job | 1 | ₹6 |
| 3 | M&L for sub main wiring drawing through PVC casing and capping with two single core 2.5 sq mm and one run of 2.5 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed. Note:- Three run of 2.5 sqmm wire and One run of PVC casing caping will be measured as one running meter. | 50 | RM | 2 | ₹100 |
| 4 | Material and labour for full load testing of EOT/ HOT crane of capacity upto 10 ton, including providing shifting/ transporting the loads from place to place, suitable loading, unloading and lifting arrangement all as specified complete all as specified and as directed. Note :- (i) The load required as per standard practise for crane capacity of 1 ton and upto 10 Ton are to be arranged by contractor. The same is deemed to be included in the quoted rates.
(ii) Load test to be carried out for all motions.
(iii) Necessary test certificate to be submitted.
(iv) The rate quoted is deemed to be included for provision of loads including transport, lifting, tackles/ ropes, man power and removal of load etc. (v) Contractor has to carry out annual crane testing by Authorised crane inspector of state.All arrangements and cost/fees for inspection are deemed to be included in quoted rates. | 20 | Each Job | - | - |
| 5 | M&L for preperation of old painted steel/ CI surface of crane (i.e. Motor panel board, handle cross arms, horizontal arms, grills, MS plates, ladder etc) complete by scraping old paint, and applying two coats of synthetic enamel paint (MES standard shade such as blue, red, yellow, and black or any other shade as directed by Eng-in-charge) for Hand operated travelling (HOT) crane capacity upto 5 tons complete all as specified and as directed. | 18 | Each Job | 1 | ₹18 |
| 6 | M&L for preperation of old painted steel/ CI surface of crane (i.e. Motor panel board, handle cross arms, horizontal arms, grills, MS plates, Ladder etc. complete by scraping old paint, and applying two coats of synthetic enamel paint (MES standard shade such as blue, red, yellow, and black or any other shade as directed by Eng-in-charge) for Electrically operated overhead travelling (EOT) crane capacity above 5 tons and upto 10 tons complete all as specified and as directed. | 2 | Each Job | 2 | ₹4 |
| 7 | S&F in replacement of break set suitable for 1 to 5 Ton capacity crane complete all as specified and as directed. | 10 | Each | 3 | ₹30 |
| 8 | S&F in replacement of break set suitable for 6 to 10 Ton capacity crane complete all as specified and as directed. | 5 | Each | 4 | ₹20 |
| 9 | S&F in replacement of damaged chain socket suitable for 5 Ton HOT crane | 2 | Each | 5 | ₹10 |
| 10 | S&F in replacement of CT chain suitable for 2 Ton HOT crane complete all as specified and as directed. | 2 | Each Job | 6 | ₹12 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
8495Tenderdocuments.pdf
Tender Documents • 0.99 MB
BOQ_891100.xls
BOQ • 16.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .