Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.3 LAccepted-AOC | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹15.7 L+₹43,492.40 (2.85%)Rejected-Finance R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L-2 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹33,304
Closing Date
6 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
SPL REPAIR TO BLDG AT KHALTSI UNDER GE KHUMBATHANG
2022_MES_550851_1
80051/72/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Khaltsi
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹33,304
7 Nov 2022
8 Sept 2022
7 Oct 2022
8 Sept 2022
6 Oct 2022
22 Sept 2022
Amount
Sch 'A' Part-I B/R Work:- Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified & directed.
M&L for chequered cement concrte tile 20x20x25 mm thick with grey cement and pigment confirming jointed and pointed in neat cement slurry in floor including laid over 15mm thick screed bed of CM 1:4 complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
M&L for 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading including fittings like handles, sliding door bolts, tower boltes complete all as specified.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification
S&F for Aluminium powder coated door window frame for door, window/ ventilator/ partitions with one or more rebate including jointing cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.
M&L for anodised aluminium door shutters,side hung type without sash bars, aluminium section weighing 0.55 kg/mtr including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws, anodised aluminium fittings such as handle 150 mm long (02 No), hinges type B-21, 100 mm long (03 No) complete all as specified and as directed.
Material and labour anodised aluminium window/ventilator shutters,side hung type without sash bars, aluminium section weighing 0.55 kg/mtr including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21, 100 mm long (03 No) suitable handle (02 No) complete all as specified and as directed.
M&L for 2nd class softwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors.
M&L for 35 mm thick, glazed and skelton shutter of Second class soft wood, open rebated and prepared to received glass, gauge, etc. (without sash bars) edges for receiving glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a); supplied and fitted to chowkats
M&L for 30 mm thick, Glazed and skeleton shutters of second class soft wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
M&L for preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 75mm long butt hinges, medium weight, cold rolled mild steel
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised
S&F 100mm long extruded aluminium alloy handles, fabricated type 'D', anodised
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section
S&F 100mm long aluminium anodised, barrel tower bolts of extruded section
M&L for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples
S&F 2 levers brass Mortice lock, vertical type, size 100 mm
S&F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F 4mm thick sheet glass, ordinary quality in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.
S&F 4mm thick sheet glass, ordinary quality in squares exc 0.5 sq.m in each pane complete all as specified and as directed.
S&F 5.5mm thick sheet glass, ordinary quality in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
All as per srl item No. 29 here-in-before but except sheeting
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge ..
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 complete all as specified and directed.
M&L for Glazed coloured ceramic tiles in vertical surface 300x 200x 7mm/ 450X 350X 7mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4)
M&L for Vitrified Ceramic tiles(light shed) 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including laid over 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed.
M&L for black granite stone table rubbed and polished 20 mm thick as in wall lining, machine cut, laid over screed bed/plaster and jointed with grey cement slurry including cutting and polishing complete over 15 mm thick cement screed bedding of cement mortar 1:4
Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed in aluminium frame work complete all as specified and directed Engr-in-Charge.
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed with nails to timber frame work as in walls complete all as specified and directed Engr-in-Charge.
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.
M&L for Plain fillets of second class soft wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L for Plain fillets of second class soft wood, sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L for Plain fillets of second class soft wood, sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or bradsin lipping complete all as specified and directed by Engr-in-Charge.
M&L for plain fillets of second class soft wood (KAIL), sectional area n. exc. 6 Sqcm moulding as in cornices, picture rails and the like complete all as specified and directed by Engr-in-Charge.
S&F in repair CP Bib taps 15 mm bore,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule complete all as specified and directed by Engr-in-Charge.
S & F in repairs CP stop valves 15 mm bore , cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-Charge.
S & F in repairs CP Pillar tap 15 mm bore , cast copper alloy, fancy type, screwed down, high pressure, complete all as specified and directed by Engr-in-Charge.
S&F in repair Vitreous China wash down EWC pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with integral trap including seat cover, making necessary connections to drain and to flushing pipe etc, jointing to PVC/CI and flush pipe including making good to floor complete all as specified and as directed.
S&F in repairs hand shower (health faucet ) suitable for 15mm dia pipe and 1.25 meter long CP flexible tube and wall hook complete all as specified & as per sample approved and directed by Engr -in Charge.
S&F in repair 15 mm PVC connection of 450mm long
S&F Grating doom 100 mm dia of PTMT (Minimum weight 40gms) complete all as specified & directed.
S&F in repair plastic water closet seat cover , black, closed pattern with flat bottom, and cover with mild steel CP or aluminium hinging devices complete all as specified and as directed.
S&F in repair PVC low level valveless, flushing cistern 10 Ltr capacity with inlet , ball valve, float valve and handle & including brackets for fixing to walls and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed by Engr-in-Charge.
S&F in repair 550x400mm Wash basins, Vitreous China (flat back or angle back type) any size, and 32mm dia brass waste fitting including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and directed by Engr-in-Charge.
Taking up or down water tubing & connections, including cleaning for re-fixing or removal to store of 15 mm bore, complete all as specified and directed by Engr-in-Charge.
Taking up or down water tubing & connections, including cleaning for re-fixing or removal to store of 20mm to 25mm bore, complete all as specified and directed by Engr-in-Charge.
M&L for galvanised steel tubing medium grade,15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
M&L for galvanised steel tubing medium grade,20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
Re-fixing galvanised steel tubing medium grade,20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
Re-fixing galvanised steel tubing medium grade,15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
S&F 16mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F 25mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
S&F in repair 25mm dia mild steel (PVC coated decorative fancy type) curtain rod including brackets to hold rod in position ABS finials of approved quaility complete all as specified & directed.
Taking down cement plaster on brick or concrete wall etc.including raking out joints,hacking for key,scrubbing down with water
M&L for Rendering 10 mm thick fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of oil emulsion distemper on new plastered walls over a coat of primer etc. complete including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge ..
Sch "A' Part-II E/M work:- Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.
M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover complete all as specified. (a) One light /fan/bell point/buzzer point exhaust fan controlled by one nos, one way 5/6 Amps switch.
One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size
One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size
All as per srl item No 103 here-in-before but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.
S&F in repair Switch piano, flush type single pole, one way 5 Amp
S&F in repair Switch piano, flush type single pole, one way 15 Amp
S&F in repair Socket outlet multipurpose 2 in 1, 5 pin, 5 Amp flush type
S&F in repair Socket outlet multipurpose 2 in 1, 5 pin, 5 and 15 Amp flush type
S&F in repair Ceiling rose 65x50mm, 2 to 3 terminal PVC/polycarbonate, isolated body
S&F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge.
S&F in repair LED lights fitting 1x 20W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F in repair sheet metal powder coated versatile double door SPN distribution board, 4 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .
S&F in repair sheet metal powder coated versatile double door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .
S&F in repair MCB SPN 40 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in repair MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 32,337.00 and any other reduction if any from quoted amount.
SONAM ANGCHOK
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .