8830/2021-22/E8

Amount

Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each compete all as specified.

Taking down shutters of any description exec 2 sqm each and refixing in same opening complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified.

S&F 2nd class hard wood, plain, solid straight chowkhets and frames, wrought framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets complete all as specified.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc complete all as specified

S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete all as specified

M&L PCC 1:2:4 type B-1 (using 20 mm graded aggregate ) as in hold fast complete all as specified.

S&F 3mm thick sheet glass, ordinary qaulity and glazing with oil putty in sqaures n exc 0.5 sqm each panes etc all as specified.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed in repair complete all as specified.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified.

S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified.

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete all as specified.

Dismantling plain or corrugated sheets of any description or thickness and gauge as in roof covering complete all as specified..

S&F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, fixed with L type or J type or cranked hook bolts in lieu of screws complete as specified. (Make TATA or JSW).

Preparation of old painted steel surfaces (such as CGI sheet, Window grill ,GI water tube, fencing post etc.) and applying two coat of synthetic enamel paint over a coat of Red oxide zink chrome primer complete all as specified.

Preparation of new steel surfaces (such as CGI sheet, Window grill ,GI water tube, fencing post etc.) and applying two coat of synthetic enamel paint over a coat of Red oxide zink chrome primer complete all as specified.

Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for Brick work with sub-class `B' bricks (burnt bricks) , straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified

Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified.

Demolition of PCC of any description and any position not otherwise specifically provided for and removing rubbish off the premises complete all as specified.

M&L for PCC (nominal mix) type B0 1:2:4 (using 20mm graded stone aggregate in foundations, filling and mass concrete complete all as specified.

M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etc complete all as specified.

M & L cement concrete type C-2 1:3:6 (Using 40mm graded stone aggt) in foundation filling and mass concrete complete all as specified.

M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 20 mm graded stone aggregate) as in plinth protection, path etc laid in alternate bays not exc 3 m in length, and finishing the surface even and fair without using extra cement all as specified.

PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel drains complete all as specified.

M&L extra over forming fair finished drains or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified

M & L for non - skid coloured ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors and including 15mm thick screed bed or bedding layer of CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M & L Coloured glazed ceramic tiles in vertical surface of size 450x350x7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match,and including 15mm thick screed bed or bedding layer of CM (1:4) complete all as specified.

M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors etc complete all as specified.

S & F in repair rotational moulded High Density Poly-Ethylene water storage tanks of capacity 500 litre and conforming to IS, hoisted and fixed in position and removing the old one to store complete all as specified.

S & F in repair rotational moulded High Density Poly-Ethylene water storage tanks of capacity 1000 litre and conforming to IS, hoisted and fixed in positionand and removing the old one to store complete all as specified

S & F in repair ball valves suitable for 15 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed complete all as specified. (minimum weight 210 gms)

S & F in repair vitreous china squatting pan "orissa pattern, size 580x440mm white , with integral foot rests(excluding flushing cistern and flush pipe) including provison of lean concrete bedding connection to drain out pipe, to flush pipe and antisyphonage pipe etc, complete all as specified.

S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe complete all as specified.(Make: Jaguar, Parry ware or Cera).

S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified.

S & F in repairs stop valves/Angle Valve suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified.

S & F in repairs bib taps, brass chromium plated, fancy type, screwed down, screwed suitable for 15 mm iron pipe or for brass ferrule and fixed complete all as specified.

S & F in repairs brass CP pillar taps, 15 mm, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified.

S & F in Repairs Vitreous china urinal partion white of size 310 x 700mm and Urinal partions slabs terminating about 40cm above floor line complete all as specified.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified.(Make Rajshri Plastiwood limited or Sintex)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all as specified.(Make Rajshri Plastiwood limited or Sintex).

S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 fixed to plugs with chromium plated brass screws in repairs complete all as specified.

S&F Grating doom round 140mm size of PTMT complete all as specified (minimum weight 50gms)

S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage complete all as specified.

S&F Cast Iron soil Waste and Vent pipe in any length with or without ears with cement joints laid in in floors/wall of 100mm bore all as specified complete all as specified and fixed in repair.

All as pe item No 57 above but fixed to wall of 75mm bore pipe

Bends ( any radius ) with duck foot or heal rest for 100 mm bore pipe fixed in repair including taking out old fittings complete all as specified.

All as per srl item No 59 above but 75mm bore pipe

CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with parallel branches for 100mm bore pipe fixed in repair including taking out old fitting complete all as directed with oval access door fixed in repairs.

All as per item No 61 above but 75mm bore pipe.

Taking down carefully copper/aluminium point wiring in PVC casing caping /PVC surface conduit/concealed PVC/steel conduit (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC unsheathed copper conductor cable for earth continuity in PVC Concealed conduit of approved size and quality ISI marked in Brick machinary/Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash/colour wash all as per existing finishes complete including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring".fixed on walls/ceiling including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engr-in-charge.

All as per item No 2 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 5 Amps

Supply & Fixing Switch piano, flush button, single pole one way 15 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 15 amps flush type.

Supply and fix ceiling rose 65X50 mm three terminals complete all as specified.

Supply and fix lamp holder for batten/angle fitting.complete all as specified and as directed

S & F Wall mounted LED integrated batten fitting 20 W LED T-5, 4 feet, PVC extruded.Including all accessories complete all as specified and as directed by Engr-in- charge.

S & F in replacement of unserviceable tube light fitting with wall mounted LED integrated batten fitting 10 W LED T-5, 2 feet, 6500K ,PVC extruded.Including supply and fixing square Box and all accessories complete all as specified and as directed by Engr-in- charge. Make:- Havells /Wipro /Crompton

Supply and fixing street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent in shape required fixed to pole/ wall with two Nos MS clamps made out of 25x4mm thick flat including nuts and bolts and washer etc complete for fixing of street light fitting including taking down existing.

Supply & fixing Building street light luminaire, LED street light 30/35 watt, IP66 Powder coated pressure die cast aluminium compact High Power LED Street light with heat resistant toughened glass.

Supply & Fixing Sheet metal enclosure for SPN DB,s, double door (when MCB,s to be used) single pole & neutral 4 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge.

Supply and fixing inreplacement MCB single pole and neutral 16 amps, 240 volts complete all as specified and directed.

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts all as spd and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

Pathania Builders

m/S Varun Gupta

Havish Construction