Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.5 L
EMD Value
₹2,912
Closing Date
21 Oct 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer REW Doda
Office of the Executive Engineer REW Doda
Pending work at Community Hall at Gwari Pyt Malhori Block Khellani (DDC Grant)
2026_RDPR_328078_6
e-NIT No 133 of REW Doda 2026-27 Dated.13.10.2026
Open Tender
Civil Works
Percentage
30 days
Doda
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Rural Development and Panchayati Raj
₹2,912
13 Oct 2026
13 Oct 2026
22 Oct 2026
13 Oct 2026
21 Oct 2026
13 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) | 125.85 | Sqm | 306.85 | ₹38,617.07 |
| 2 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) | 85.49 | Sqm | 266.2 | ₹22,757.44 |
| 3 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) | 69.32 | Sqm | 241.25 | ₹16,723.45 |
| 4 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick | 203.21 | Sqm | 138.1 | ₹28,063.3 |
| 5 | Providing and fixing 30 mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood | 5.3 | Sqm | 3,250.75 | ₹17,228.98 |
| 6 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood | 3.58 | Sqm | 3,101.55 | ₹11,103.55 |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work | 7.9 | Sqm | 131.85 | ₹1,041.62 |
| 8 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm | 10 | Each | 63.35 | ₹633.5 |
| 9 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm | 5 | Each | 60 | ₹300 |
| 10 | Carriage of Sand | 4.08 | cum | 654.3 | ₹2,669.54 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.30 MB
BOQ_1110499.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .