Construction of PMGSY Divisional Office Near Bus Stand Poonch

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm.and below

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 25 mm upto 40 mm.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. h to the dumping ground within 50 meters lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge: 1:3:6 or richer mix (i/c equivalent design mix)

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas ( exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan ) including disposal of excavated earth, lead up to 50m and lift upto 1.5 m, as directed by Engineer-in-Charge. Classification of soil : All kinds of Soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed 25 meter beyond 1 m from cutting edge: All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work up to plinth level with : 1:5:10 ( 1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size ).including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering .All work up to plinth level with : 1:3:6 with ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size).With 20% stone.including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering .All work up to plinth level with : 1:3:6 with ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size).including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering .All work up to plinth level with : 1:2:4 with ( 1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size).including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Super structure: Cement mortar 1:6 ( 1 cement : 6 coarse sand).including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars

Centring and shuttering including strutting propping etc. and removal of form for :-

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters,buttreses,plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622) of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), including grouting the joints with white cement and matching pigment etc. complete size of tile 600x600mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood

Providing and fixing 18mm thick specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately). Flat pressed 3 layer particle board or graded wood particle board grade-I type-II conforming to IS” 3087 edges to be painted with polyurethane primer.

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size.including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Random rubble masonary with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12(1 cement:6 coarse sand:12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 ( 1 cement:6 coarse sand).including curing , all leads /lifts & carriages (Complete job)

Dry random rubble masonary (Nallah) with hard stone in foundation and plinth.Without bond stone. including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Dumping stone including cost of stones. On Horizontal on level. including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer- in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge. Polyester powder coated minimum thickness 50 micron aluminum tubular handle bar

Providing and fixing cupboard shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade I Type II) having one side decorative lamination and other side a balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of Engineer- in-charge

Providing and Fixing of PVC Laminates for PVC panelling of approved quality and make including cutting,hoisting & fixing in poistion etc including all necessary fixing accessories etc all complete job for walls & ceiling

For Walls

For Ceiling

Labour engaged for removal of vegetation cuting of grass & removal of mulba and its disposal etc complete job.

Providing and fixing hardware anodised aluminium fittings including screwes complete

Tower bolt 250 x 10 mm

Tower bolt 150x10mm.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chuna flushing cistern and CP flush bend with fittings and C.I.brackets 40mm flush bend, over flow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets cutting and making good the walls wherever required: WC pan with ISI marked with solid plastic seat and lid .

Providing and fixing wash basin with C.I brackets, 15mm C.P.brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required: White vitreous china wash basin size 630x450mm with a pair of 15mm C.P. brass pillar taps.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long , 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour , weighing not less than 88 gms

Providing and fixing PVC low level flushing cistirn manually cotoral device (Handle lever) with all fitting and fixitures complete 10 liter capacity coloured .

Providing and fixing waste pipe fro sink or wash basin including PVC waste pipe fitting complete 40mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453 x 357mm (outer dimensions).

Providing and fixing PTMT Liquid soap container 109mm wide,125mm high and 112mm distance froa wall of standard shape with brackets of the same material with snap fittings of approved quality and colour,weighing not less than 105 gms.

Providing and fixing white vitreous china flat black wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm size respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union and G.I. clamps complete including painting of fitting and brackets,cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C automatic flushing cistern.

Providing and fixing G.I pipes complete with G.I fittings and clamps,including cutting and making good the walls etc. INTERNAL WORK-Exposed on wall

15 mm dia nominal bore ,Medium

20 mm dia nominal bore ,Medium

Providing and fixing G.I inlet connection for flush pipe connecting with WC pan

Providing and fixing Soil,Waste and bent pipe 100mm dia

Providing and placing (at all floor levels) polyethylene water storage ISI: 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Stainless steel A ISI 304(18/18) kitchen sink as per I.S.13983 with C.I. brackets and stainless stell plug 40mm,including painting of fittings and brackets,cutting and making good the walls wherever required:Kitchen sink with drain board 510x1040mm bowl depth 250mm

Providing and fixing brass bib cock of approved quality.

15 mm nominal bore

20 mm nominal bore

PEERZADA SAYED NISAR HUSSAIN SHAH

M/s Farooq Hussain Contractor

Mohd Bashir

Arvind kumar

Mangal Singh Saini and Sons

MOHD BASHIR MALIK

M/S Matloob Hussain Shah

M/S QAZI MUSHTAQ SON

MOHD RASHID MIR

GHULAM NABI MIR