REPAIR/ REPLACEMENT OF LED FITTING AND FIXTURES AND CONNECTED ITEMS FOR IMPROVEMENT OF MD (OFFRS/ JCOs/ORs) ACCN AND OTM ACCN AT SUBATHU AND REPAIR TO ROOFING, JOINERY, FLOORING OF MARRIED AND OTM ACCN AT SOLAN UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

M&L for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by Engineer-in-Charge.

S&F factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge.

S&F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing complete all as specified

S&F Factory made box type steel window with side hung shutters (glazing) with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. Note : Glass/Wire mesh required for fixing in window will be measured and paid for separately

-Ditto-as item no 06.00 but Gauged shutter without glazing bars.

S&F Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. Note : Glass/Wire mesh required for fixing in ventilator will be measured and paid for separately.

Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.50 sqm complete all as specified and as dircted by Engineer-in-Charge.

S&F 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading, any type) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge.

S&F Figured glass thickness 4 mm, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S&F 300 mm size MS door spring including roller and roller plate by means of welding as in repairs complete all as directed by Engineer-in-Charge

S&F Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified & directed.

S&F barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.

S&F barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed.

S&F aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed.

S&F Aluminium locking bolts, anodised, with bolt not less than 10mm dia, 100 mm size as in repairs, complete all as specified & directed.

M&L preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer.

M&L for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

S&F Stainless steel 20 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall in repairs,with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works all as specified and as directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc; wind ties for roof including securing bolts; purlin/ rafter of roof sheet; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.

Same as item No 28.00 above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc all as specified.

Same as item No 28.00 above but except sheeting all as specified.

S&F bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

S&F in repairs Stop/Angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms), fixed as in repairs complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), fixed as in repairs complete all as specified and directed.

S&F central hole Basin Mixer, WHB/Bathroom, Kitchen , without poupwaste system and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

S&F of PVC waste down pipe of 40mm bore as in repairs, complete all as specified and as directed.

S&F of PVC waste down pipe of 32mm bore (folding) as in repairs, complete all as specified and as directed.

S&F PVC flexible pipe 32 mm(non-folding) suitable for WHB/ Sink/Urinals, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.

S&F 15mm dia PVC connection with PTMT nut, of length 750mm, fixed as in repairs complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe.

S&F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 20mm bore iron pipe

Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site

S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple(inlet & outlet) etc. but excluding connection of ball valve, over drain pipe complete all as specified and directed.

Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site

S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connection and removal at site directed by Engr-In Charge.

Taking up or down 20 mm dia steel tubing and connection and removal at site directed by Engr-In Charge.

Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.

Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as spd & directed.

Refixing old 15mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

Refixing old 20mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required as in repair, complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required as in repair, complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed.

Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed.

M&L for Rendering 15mm thick on fair faces of newly brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface), complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc in any position complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of old brick work or concrete surfaces incl cornices, chajjas, sun shades etc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content), complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately.

Supply only Integral waterproofing compound all as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge.

M&L for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint, complete all as specified.

Demolition of stone slabs and PCC tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar.

Roughening surface of old concrete by picking,sweeping clean and washing down eith water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm. Complete all as specified and directed.

M&L for Screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with gray cement slurry mixed eith pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for repair to roof lekage by using 100mm wide STP flash strip complete all as specified and directed by Engr-In- Charge.

M&L for repair to roof lekage by using 50mm wide STP flash strip complete all as specified and directed by Engr-In- Charge.

S&F soap dish brass size 160x160x90mm, chromium plated fancy type fixed to plugs with chromium plated brass screws as in repairs, complete all as specified and directed by Engr-In- Charge.

S&F in repair, rectangular sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs, complete all as specified and directed by Engr-In- Charge.

S&F Fancy type elegant corner glass shelf of radius 300 mm with 300x600 mm size including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above GL) complete all as specified and directed.

Material & Labour for 50mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels.

Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete.

M&L for point wiring using approved colour coding as per IS with stranded copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl PVC conduit (ISI marked) including cutting chiseling and grouting concealed (Any type Wall) PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified

One light/Fan point controlled by one 5 Amps switch one way

One light point controlled by two way switch one way

One bell point controlled by one switch

One 3 pin socket point 5 Amp on independent board

One 3 pin socket point 5 Amp on same board with other switches.

All as per item No. 75.00 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed.

All as per item No. 75.00 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed.

Point Wiring with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly or as directed and MS terminal box with 3mm thick masonite laminated sheet top cover fixed on Wall for one light and fan point controlled by one switch complete all as specified and as directed are as follows :-

One light/Fan point controlled by one 5 Amps switch one way

One light point controlled by two way switch one way

One 3 pin socket point 5 Amp on independent board

One 3 pin socket point 5 Amp on same board with other switches.

All as per item No.78.00 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed.

All as per item No. 78.00 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed.

Supply and fix Switch piano, flush button single pole, 6 Amps one way.

Supply and fix Switch piano, flush button single pole, 16 Amps one way.

M& L switch piano, flush type, single pole 2 way 6 Amp,ISI marked

Supply and fix bell push, flush button single pole, 6 Amps one way.

Supply and fix Sokcet outlet, 2 in 1, flush type 6 Amp 2/3 pin muliti purpose

Supply and fix Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose

Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan.

Supply and fix in repair Door bell electronic, music type, 230 volt AC.

Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks.

S&F in repair Lamp holder,PVC insulated body, with back plate suitable for batten fitting

S&F in repair Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base complete all as specified and directed.

S & F in repair LED bulb 09 watt complete all as specified and directed.

S & F in replacement Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8 hours-10 hours and back up time upto 4 hours.

S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

S&F in replacement LED tube light fitting of 10 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

Supply and fix in repair 36 watt LED Light 2' x 2' LED luminare withUltra Slim recess mounted EdgeLit LED module with high brightness LED package and Unique pattern acrylic de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong/grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

S&F in repair bldg security light light fittings 1x 25 Watt LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed.

S&F in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.

S & F in repair Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.

Supply and fix in replacement Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note 3 (three) run measured as 1(one) run.

Supply and fix in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note 3 (three) run measured as 1(one) run.

Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps.

Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified.

Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 4 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Supply and fix in repair MCB single pole 6 to 32 Amps 240 volts, B series, 10 kA rupturing capacity

Fixing only MCB single pole 6 to 32 Amps any capacity

Supply and fix in repair MCB single pole & neutral 40 Amps 240 volts, B series,10 kA rupturing capacity

Supply and fix in repair MCB Tripple pole & neutral 40 to 100 Amps 240 volts, B series,10 kA rupturing capacity providing in DB complete all as specified.

Taking down exhaust fan dismantling and painting of exhaust fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl replacement of capacitor, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refix same complete all as directed

Rewinding of 300mm sweep Exhaust fan with appropriate size of copper enamelled wire including varnishing ,heating with proper insulation complete and testing all as specified and directed.

Taking down ceiling fan and and replacement of fan controllaer as per existing model and make and cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl bearing/bush, minor nuts bolts screws washers & refix same complete all as directed

M&L, Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 4mm dia by means of of nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified.

Supply and fix in repair Switch piano, flush button single pole, 6 Amps one way.

Supply and fix in repair Switch piano, flush button single pole, 16 Amps one way.

M& L switch in repair piano, flush type, single pole 2 way 6 Amp,ISI marked

Supply and fix in repair bell push, flush button single pole, 6 Amps one way.

Supply and fix in repair Sokcet outlet, 2 in 1, flush type 6 Amp 2/3 pin muliti purpose

Supply and fix in repair Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose

Supply and fix in repair fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan.

Supply and fix in repairs modular switch 1 way 10A,1 as per existing make at site

Supply and fix in repairs modular switch 1 way 20A,1 module as per existing make at site

Supply and fix in repairs socket, 10A-2/3 pin combined 2 modules as per existing make at site

Supply and fix in repairs socket, 16A-2/3 pin combined 2 modules as per existing make at site

Supply and fix in repairs moduler fan Requlator, 120 W-2 modules as per existing make at site

S & F in repair LED Driver 34 to 42 W, 240 Volt for 2'x2' LED fitting as per existing fitting (any type and make) complete all as directed.

S & F in repair LED Driver 24 to 30 W, 240 Volt for 2'x2' LED fitting as per existing fitting (any type and make) complete all as directed.

Amount of credit of Rs. 187143.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

M/S CHOPRA & COMPANY

R B TRADERS

Rajesh Agencies

M/S SHANTI SARUP DINESH CHAND

Pankaj Traders