shelter for Goats

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding1.5m(one point five metre)in width or 10sqm (ten square metre) on plan ) including dressing of sides and ramming of bottoms. lifts upto 1.5m (one point five metre), including getting out the excavated soil and disposal of surplusexcavated soils as directed by Engineer-in-charge within all leads and lifts in ordinary rock including carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Filling with excavated earth (excluding rock) in trenches, plinths, side of foundation etc. in layers not exceeding 20 cm (twenty centimetres) in depth, consolidating each deposited layer by ramming and watering as directed by Engineer-in-Charge within all leads in all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for walls (any thickness ) including attached pillasters, butteresses, plinth and string courses etc. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20Cm (twenty centimetres) wide including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing and laying cement concrete work 1:2:4 ( one cement: two coarse sand : four graded crushed stone aggregate 20mm (twenty milimetre) nominal size and curing complete excluding cost of form work all work upto plinths level including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarsed sand: six graded stone aggregate 20 mm (twenty millimetre nominal size) curing complete all work up to plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarsed sand: eight graded stone aggregate 40 mm (forty millimetre nominal size) curing complete all work up to plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:5 (one cement : five approved coarse sand) in super structure above plinth level up to all floors level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250×16mm( two hundred fifty into sixteen millimetre)including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (one hundred twenty five millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100mm (one hundred millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing fly proof galvanised M.S (Mild steel) wire gauge with 0.63mm (zero point six three milimetres) dia wire and average width of aperture 1.4mm (one point four milimetres) in both directions to windows, clerestorey windows and doors with mild steel flat 15x3mm (fifteen into three milimetres welded smoothly complete including entire carriage of materials in all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels20mmx10mmx2mm (twenty milimetres into ten milimetres into two milimetres) and braced with flat iron diagonals 20mmx5mm (twenty milimetres into five milimetres) size with top and bottom rails of T-iron 40mm x40mm x6mm (forty milimetres into forty milimetres into six milimetres) with 40 mm (forty milimetres)dia steel pulleys complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1mm (one milimetre) thick M.S. (Mild steel) sheet door with frame of 40x40x6mm (forty milimetres into forty milimetres into six milimetres) angle and mm (six milimetres) thick M.S (mild steel ) gusset plates at the junctions and corners, all necessary fittings complete including applying coat of approved steel primers using flats 30x6mm (thirty into six milimetres) for diagonal braces and centralcross piece including including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In gratings, frames,guards, guard bars,ladders, railings, bracketsgates and similar wirks including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing SHS/RHS M.S. (Square Hollow section/ Rectangular Hollow Section Mild Steel)pipe of different sections welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams, joists,channels, angles, tees flats with connection plates or angle cleats as in main and cross beams, hips and jack rafters, purlins connected to common rafter and the like including entire carriage of materials up to and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 0.60 (zero point six zero milimetres)thick pre-painted steel of Tata/Jindal or equilavent quality in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP)organic coating of 20 ( twenty) micronover 5 (five) microns primercoating to black coat of polyster of 5 (five) mironover 5(five) microns primer coating including fixing with per-painted iron J or L hooks, bolts and nuts 6mm(six milimetres) diametres with pre-painted limpet and rubber washer complete with all accessories as required as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing expanded metal weight not exceeding 3.00 (three kilograms) per square metre to steel members in partitions including entire carriage of material up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 15 MM ( Fifteen millimeter) thick cement plaster on rough side of single or half brick wall of mix 1:5(one cement five approved coarse sand) upto all floor levels including entire carriage of materials up to all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Painting steel work with Deluxe Multi SurfacePaint to give an even shade. Two or more coat applied @ 0.90 ltr/10sqm (zero point nine zero litre/ ten square metre) over an under coat of primer applied @ 0.80 ltr/10sqm (zero point eight zero litre /ten square metre)of approved brand and manufacture including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Wall painting (two or more coats on new work) with acrylic emulsion paint of approved brand and manufacture of required colour to give an even shade including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Demolishing Reinforced cement concrete work manually/ by mechanical means up to all levels including stacking of steel bars and disposal of unserviceable material with in all leads as per direction of Engineer-in-charge including entire carriage of materials up to all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

thakur enterprises (BID ID -531316)

Daljeet Singh (BID ID -531751)

HARISH KUMAR GOVT CONTRACTOR (BID ID -531410)