Repair and Maintenance of PS Road to Dakarada Road in the district of Rayagada for the year 2025 26

Clearing and grubbing of road land including uprooting vegetation grass, bush, shrubs and trees of girth up to 300mm, with all labour, T&P, taxes & cess etc complete as per direction of Engineer-in-charge.

Construction of enbankment with approved material obtained from borrow pit with lead and lift transporting to site by mechanical means within lead of 5kms, spreading grading to required slope and compacting to meet requirement of table 300-2 and clause 305 of MoSRT&H specification for road and bridge works etc complete as per direction of EIC.

Providing, laying, spreding and compacting stone aggregates of specific sizes to water bound macadam specification including spresding in uniform thickness, hand packing,rolling with three wheeled steel roller 8-10 tonnes in stage to proper grade and camber, applying and brooming requisite type of screenig/binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density as per clause 404 of MoSRT&H specifications for Road & Bridge works(4th Revision) with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge (measurement will not taken for quantity of filler material, compacted thickness to be measure as 75mm. thick) (WBM Grade-III)

Providing and applying Primer coat with penetration grade of bitumen emulsion using bitumen pressure distributor including all cost, carriage, royality, taxes of materials etc.

Providing and applying Tack coat with bitumen emulsion on prepared surface including clearing of road surfaces and spraying primer @ 0.20kg/ sqm using Mechanical means as per clause 502 of MoSRT&H Specifications of Road & Bridge work (04th Revision).

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using S-65 penetration grade bitumen @ 14.6 kg/10 sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 of MoRD and as per direction of Engineer-in-Charge.

Providing & laying 6mm thick precoated seal coat using 6mm size chips etc. complete as directed by the Engineer-in-charge.(By Manual means) with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge.

Providing and fixing of R.C.C(1:2:4) pre cast Kilometer stones of different size with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge. Ordinary K.M stones

200 M stones

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per MORD techincal specification Clause 1915 with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge.

Please Enable Macros to View BoQ information