Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹68,500
Closing Date
2 Jul 2026, 10:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Public Works Department
Annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to C & D Type, Varada Block & Arkaavathi Block, Koramangala, Bengaluru From August-2026 to July-2027
309083
PWD/2026-27/BD/WORK_INDENT36768
Open
Buildings
PWD No.2 Buildings Division Office Bengaluru
5 documents required · 5 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 b)Satisfactory completion as prime contractor in similar construction works to an extent of 50% of the cost of the work i.e. Rs 17.06 Lakhs
Company Registration Certificate/KPWD Class III Civil License & above.
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.34.14 lakhs
Nill
Nill
Nill
Nill
Nill
3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 12 month. B is Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 12 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
GST Registration Certificate
Nill
Nill
₹860
₹68,500
24 Jun 2026
24 Jun 2026
4 Jul 2026
29 Jun 2026
Annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to C & D Type, Varada Block & Arkaavathi Block, Koramangala, Bengaluru From August-2026 to July-2027
Cleaning of Water Storage Tank or Sump by following method: (1) Empty the Tank/ Sump and make it to near dry, (2) Apply blEaching powder uniformally (@ Tank capacity x 0.5 gms/litre) inside the Tank/ ...
Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist f...
External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 15 mm nominal bore
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete : 250x10mm
Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 100 mm with plate 150x32 mm
Providing and fixing brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 25 mm nominal bore
Providing and fixing brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm nominal bore
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy
Providing and fixing chromium plated brass curtain rod with ISI mark hav- ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherev...
Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. - 125x65x2.12mm
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 40mm
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of Engineer- in-charge
Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
Providing and fixing C.P. brass bib cock of approved quality conforming
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g.
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 g
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing solid plastic seat with lid for pedestal type W.C.
pan complete : White solid plastic seat with lid
Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - cl...
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete. Semi rigid pipe : 40 mm dia
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ...
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. - 1...
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required,...
Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 4 mm (weight not less than 10kg/m²)
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...
Repair to existing ply wood ward-robes with 19mm plywood, beading,laminate and all necessary including cost of materials labour, lead, complete as per specifications.
Removal of old broken Glass panes ( any thickness of size, quality or description ) from metal frames, glazed with putty or fixed with beads including cost of labour, complete as per spec...
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres sucti...
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...
Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fix...
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Providing and fixing plain rolled Glass 4mm thick with teakwood beading
Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting
arrangements & all necessary accessories complete
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer...
Repairs to existing Modular kitchen with Baskets, hinges, sliders/Drawer, planks including finishing cost of materials, labour, complete as per specifications
Repairing and fixing shutters (panelled or glazed) to doors, windows,
ventilators and cupboards.
Carpenter (1st Class) (with connected machineries) work has executed as per direction of the Engineer-in-charge of the work (III Semi-Skilled: Page No.A-49.Common Schedule of Rate for Engineering Depa...
Licenced Plumber with tools work has executed as per direction of the Engineer-in-charge of the work(II Skilled: Page No.A-49 Common Schedule of Rate for Engineering Department 2023-24 Public Works De...
Supply of watchman/peon (Office staff and Drivers Page No.A-50 Common Schedule of Rate for Engineering Department 2023-24 Public Works Department Vol-1)
Supply of Maistry or Supervisor. has executed as per direction of the Engineer-in-charge of the work (Notification No. KAE 83 LWA 2022 datedl3-0L-2023 II Skilled: Page No.1).
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW2 GENRAL 36768.doc
Tender Document • 1.46 MB
Download all tender documents and submit your bid