CERTAIN REPAIRS TO E/M INSTALLATION AND GE OFFICE AND REPAIR TO OPEN DRAIN, FOOTPATH, ROAD SIDE FURNITURE, FENCING UNDER AOR OF AGE B/R-II AT AMRITSAR CANTT

Amount

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level)

M/L Cement concrete 50 mm thick type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protection & sub base etc completed all as specified and directed.

Dismantling floor hearth or ,wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

M & L for brushing neat cement slurry with 3Kg of cement per Sqm including roughening of surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc.

Material and labour for dark coloured ceramic tiles 400x400x7 thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles bedded over and including 15mm thick cement slurry, pigment to match the colour of screed in cement mortar 1:6 complete all as specified.

M & L for ceramic glazed coloured printed tiles (some portion highlighted with contrast colour) of size 300 x450 x 7 mm thick on and incl 10mm thick Rendering in cm (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting / dado complete.

Supply and fixing dark shade vitrified ceramic tiles 10mm thick (square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm as in floor set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 complete all as specified

All as per ser item No 7 here-in-before but on vertical surfaces

M&L for 75 mm thick PCC ( 1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base complete all as specified .

M&L for sand filling 25mm thick for laying of interlocking block complete all as specified.

M&L for Cement concrete machine pressed interlocking tiles 80mm thick Jointed and pointed in neat cement slurry as in floors complete all as specified.

S & F precoated chequered cement concrete tile 20 cm x 20cm x 25 mm thk set,jointed & pointed in neat cement slurry with grey cement and pigment in floor including screed bed 20mm thick in CM 1:6 complete all as specified.

Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each and removing from site.Complete all as specified.

All as per Srl item No 13 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr

Taking down shutter of any description exc 1.00 sqm but n.exc 2 Sqm each complete all as specified.

Taking down Shutter of any description Exc 1.00 Sqm But N.exc 2.00 Sqm each and refixing in same opening including removal of unserviceable screws, renewal of builders harware etc all as specified and directed.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double frame, comprises glazed and gauged skelton shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismentled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos/leaf. (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. Note 1 :- Wire guage, Guard bar, sheet glass and painting shall be measured and paid sperately. 2. Mode of measurement for this item shall be for window portion only excluding ventilator portion where ever shown in drawing.

All as per Serial Item No 17 above but single frame in ventilator fixed complete all as specified all as specified and directed.

Supply and fixing 35 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube, suppling & fixing in opening as per specifiaction & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S/F framed work as in doors, chowkhat, Grill and guard bars,gates of angle frame work as in cooler stand fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing 3mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane complete all as specified and dircted

S &F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F butt hinges medium weight cold rolled mild steel complete size 100mm

S & F 125mm alluminum handles, cast type, anodised etc complete all as specified.

S & F 200mm alluminum anodised barrel tower bolts of extruded sections and fixed complete.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed

S&F rotational moulded polythyene 1000 litrs capacity water storage tanks Triple Layer(White Colour) cylindrical vertical with closed top hoisted and fixed in position incl. 20mm dia float valve brass fitting and dismantling of water tank and removing from site. All as specified and directed including old disconnecting and taking down complete.Make- Sintex

S&F rotational moulded polythyene 500 litrs water storage tanks Triple Layer(White Colour) cylindrical vertical with closed top hoisted and fixed in position incl. 20mm dia float valve brass fitting and dismantling of water tank and removing from site. All as specified and directed including old disconnecting and taking down complete.Make- Sintex

Raking out joints/pointing to brick work or brick tiles, laid flat, in floor , surface channels, roofs etc complete all as specified.

Material and labour for flush pointing to brick laid flat, brick on edges or brick tiles in paving in cement mortar 1:3 complete all as specified.

Taking up or down steel tubing and connections of 15mm bore complete all as specified and as directed.

All as per item No 35 above but 20mm or bore of pipe

S&F of GI Tubing medium grade 15mm bore laid in trenches and as wall `complete including cuttings chases in walls and making good, cutting portion all as specified and directed.

S&F of GI Tubing medium grade 20mm bore laid in trenches and as wall `complete including cuttings chases in walls and making good, cutting portion all as specified and directed.

S&F in repair of brass cromium plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed. Make- Prayag

S&F in repair Pillar taps cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repair complete all as specified and directed (dia of bore 15mm). Make -Prayag

Supplying and fixing in repair 15 mm bore, Angle valves, cast copper alloy, concealed, chromium plated with fancy type screwed down high pressure with crutch screwed both ends for iron pipe or for unions including taking down old unserviceable stop valve complete all as specified.

S&F in repair concealed stop cock 15mm dia bore chromium plated cast copper alloy with long shank and cup (concealed type).Make- Prayag

S&F in repair vitreous china squatting pan Orissa pattern size 580 x440mm white with integral footrest, including trap set and conection to trap, flushing pipe etc. complete including making good to floor all as specified and directed. Make Cera-

S&F in repairs PVC valveless , syphonic action flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve , float and handle including brackets and PVC flush pipe complete all as specified. Make Cera

S&F in repair 15mm dia PVC connection with PTMT nuts and PVC washers 45 cm long and connecting of water pipes all as specified and directed.

Supply and fixing in repair vitreous china urinal half stall type with CP spreader for fixing with 15mm dia pipe with grating and union for discharge pipe, including providing and fixing plugs with urinal spreader, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 580 x 450mm incl waste, china & porcelain stopper incl brackets complete all as specified and directed

Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc all as specified .

M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement.

M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement.

M&L for 10 mm rendering in cement mortar (1:3) to ceiling and similar work finished the surface even and smooth without using extra cement.

Material and Labour for preparation of new/existing plastered surfaces and applying two coats of oil bound distemper over coat of white wash complete all as specified.

M&L for two coats of white wash on newly/existing plastered surface on ceiling including preparation of surfaces.

Material and Labour for preparation of new/existing plastered surfaces and applying two coats of cement base paint on wall complete all as specified.

Demolition of brickwork built in cement mortar.

M&L Brick work built CM 1:6 subclass B brick straight or curved on plan exc 6m mean radius.

All as per item No 56 above but except brick

M & L for two coats of synthetic enamel paint over one coat of primer (Pink Primer) on new wooden surfaces exceeding 10cm width or girth including preparation of surface complete.

Preparation of old painted wooden surfaces of any description, exceeding 10 cm width or girth including cleaning, stopping and rubbing down etc and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in shelves, roof landing etc complete all as specified (including demolition).

M&L for form work to soffits of suspended slab such as roof slab Floor slab, shelves and chajjas etc not cxc 200mm thick complete.

M&L TMT bar’s 6 to 8mm dia cut to length bent to shape required including cranking bending and binding with wire (annealed) not less than 0.9mm or scouring with clips quality conforming to Fe-410 or Fe 410.0 complete.

Dismantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings.

Dismantling wooden fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

Dismantling unframed timber scantling 40sqcm and over in section,in any position complete all as specified and directed.

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering fixed with self tapping screws / L type or J type hook complete all as specified and directed by Engr-in-Charge.

S&F prepainted galvatume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering incudingl ridge fixed with self tapping screws / L type or J type hook as specified and directed.

S/F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. FE -290 Gde E-165

Demolition and breaking up AC drain pipe set in cement morter.etc complete all as specified and directed.

S&F PVC (SWR) pipe 110mm for rain water pipes single socketed,in any length fixed to walls incl stacks Clamp Complete all as specified and directed Make-Finolex/Supreme.

S&F 100mm PVC (SWR) bends complete all as specified and directed.Make-Finolex/supreme

Dismantling of brick tiles single layer on roof, jointed and grouted/pointed in cement mortar including cleaning serviceable tiles and stacking properly for reuse, disposal of unserviceable tiles and debries/rubbles from site complete all as specified and directed

Demolition of mud in roofs, any thickness including plastering and leaping etc and removal of mud phuska to a distance exc 1.5 Km but n.exc 5.00 Km complete all as specified and directed

M & L for PCC (1:3:6) type C1 (20 mm graded stone aggregates) as in roof kerbs, sloping padding in roof slab or mud stops, rounded or chamfered on edges

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

M &L for 40 mm thick brick tiles laid over 15mm thick cement mortar (1:6) and jointed grouted,flush in cement (1:3) complete all as specified.

All as per item No 78 only Except Tiles.

Supply only Integral water proofing compound

Excavating in post holes (or similar holes ) each n.exc. 0.5 cum getteting out returning filling in and ramming earth or broken rubble mixed with earth round in layers n.exc. 25 cm in soft / loose soil .

M&L for cement concrete type C2 1:3:6 (40mm graded aggregates) in foundation filling and mass concrete .

M&L for preparation of new or previously untreated surface of steel of any discription, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide.

S&F MS work as in gates, hook and pintle hinges large haspa and staples, chains hand made sliding bolts, clamps , hold fasts, wall ties , plate washers and similar small articles conforming to Fe 290 Gde E-165 including dismantling of old gate complte all as specified and directed

S&F rolling shutters without ball bearing as specified incl top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated ,complete,push pull or manual type thickness of laths 1.00mm.

Supply and fixing aluminium chowkat powder coated of size as directed according to site requirement for door and windows complete all as specified.

Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 14 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 5mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm Note :- Floor spring shall be measured and paid separately.

Supply and fixing aluminium powder coated shutter (for window and ventilator) with style, top and bottom rail of section 44 x 44mm of 14 Gauge thick side hung type, without sash bars including 5mm thick glass panes with 5 micronthick black sheet and necessary jointing cleats, rubber beading, aluminium anodized snap beading , scews, aluminium anodized fitting such as peg stay150mm long,butt hinges 100mm, tower bolt 100mm and handle etc complete all as specified.

Taking down aluminium door shutters of area exc 1 sqm but not exc 4 sqm each and replacement of necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and refixing in the same opening complete all as specified

Supplying and fixing 5.5 mm thick sheet glass ordinary quality in squares exc 0.50 Sqm in each panes including rubber packing and aluminium beading with and including solar control film 25 Micron reflective type stuck to glass panes as per instruction of manufactures complete all as specified.

Supply and fixing aluminium door closer hydraulically regulated designation No 2 universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified.Make:- SANDHU/ EVEREST

Supply and fixing double action floor spring hydraulically regulated made up of 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of steel complete all as specified..Make:- SANDHU/ EVEREST

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

All as per ser Item No 93 above but except bricks

M&L for demolition of wall and ceiling boards (fibre,Pulp etc) of any thickness,including cover fillets complete all as specified and directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with hangers 6mm dia GI (Upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long complete all as specified and directed.

S&F 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish including sealing the joints wit POP and applying two coats of Oil bound distemper over a coat of primer all as per specified and directed. Note(Frame work for ceiling shall be measured and paid separately)

M&L for cutting chases pinning in and making good to facings in brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,shelves,lintels etc and making good cutting exceeding10cm but not exc 20 cm girth complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:6 as in shelves and landings complete all as specified and directed.

Dismantling of barbed wire of any description and in any position complete.

Dismantling RCC fencing posts any section incl taking out embedded portion and making good distrubed ground (posts embededed in natural ground)

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Supply and fixing GI chain link fencing size of mesh (100x100mm) dia of wire 4mm to angle iron post, rails staining bolts, etc including provision of binding wire complete all as specified.

S&F and other steel section, drilled and countershunk, embedding in concrete and screwing etc post and struts in fencing inluding cutting tops to shape as directed, drilling holes, notching for wires etc flat iron fillets, round bar and nut/bolt (for securing wire mesh ) all as per specified and directed.

S/F mild steel bolts screw (machine made) with hexagonal or square head at one end and screw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 11 to 15mm, complete all as specified and directed.

M&L for preparation of new or previously untreated surface of steel of any discription, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide.

M&L for mild steel round bars Fe 410- Gde E-250 around fencing hooking,welding and straining properly to fencing complete all as specified and directed by Engr-in-charge.

M&L for preparation of new or previously untreated surface of steel of any discription, n.exc 10 cm in width or girth, not otherwise described with one of synthetic enamel paint over a coat of red oxide complete all as specified all as specified and directed.

M&L for sub class 'B' old size bricks laid on edges in floors and bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

All As per ser item no 109 but except bricks

M&L for 100 mm thick cement concrete type B-1 (1:2:4) (20mm graded aggregates) as in drain including demolition of PCC Complete all as specified and directed by Engr-In- Charge.

M&L for forming fair finished drain or channel in cement concrete,using extra cement, including forms,moulds,mitred/stopped ends etc complete all as specified and directed.

M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in shelves,drain covers complete all as specified and directed by Engr-In-Charge.

M&L for applying two coats of cement Base paint over one coat of primer surface on newly plastered surface on walls complete all as specified as directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C-2(using 20mm graded stone aggregates) as in roof kerb or mud stops,rounded or chamfered on edges and like including weathering slight rounded and throating complete all as specified and directed.

M & L Cement concrete 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in floor finished even `and rough completed all as specified and directed.

M & L cement concrete 100 mm thick (1:2:4) type B1 using 40 mm graded stone aggregate as in floor completed all as specified and directed.

M&L for glass dividing strips 3mm thick and 38 mm wide inserted in position to confirm to design complete all as specified and directed.

Supply and fixing in repair solar stud size 125x125x25 mm made from aluminium alloy and PC construction solar powered by monecrystaal solar pane type of battery one high capaacity no cd rechargeable battery view distance approximaate 1000 mtr LEDs 10mm,3pieces each side and pieces are used for high brightness of red colours backup 12 hours of continous lighting at night mounted on concrete or muddy ground water proof and hardness tested complete all as specified and directed model DA 110 of DARK EYE (DHRUV)

Supply & fixing in repair plastic road stud DA-972 of aluminium alloy body reflective panel dynamically designed to bear maximum load with two highly reflection moulded in PMMA material size of stud 110x120x24mm weighing approx 435 gm complete all as specified confirming to model No DA-972 of Dark Eye.

Supply & fixing in repair plastic road stud DA-972(P) Mad or ABS materials dynamically designed to bear maximum load witj two highly reflection moulded in PMMA material sizr of stud 108x100x20mm weighing approx 76 gm in yellow colour fixed with MS pin complete all as specified confirming to model No DA-972P of Dark Eye.

M &L for 50mm thick PCC (1:4:8) type D-1 using 20mm graded stone aggregate as in sub base complete all as specified

Labour only for laying cement concrete Machine Pressed interlocking tiles 60mm thick, Jointed and pointed in neat cement slurry as in floors complete all as specified

M & L for precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in drain covers complete all as specified and directed

M/s. M Company

m/s. gopal krishan