WBPWD/SE/SWEC/NIQ45/2024-25

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make:- Gloster/Havells/KEI/RR kable) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Avg. run 09 mtr.

S&drawing 1.1 kv single core stranded ' FRLS " PVC insulated &unsheated single core stranded cupper wire (approved make)of the following sizes through prelaid poly pipe. & by the Gifish wire & making necy connection as required. [ Make-Finolex/Gloster/RR Kable/KEI/Havells]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (For Power Plug & Computer Point)

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC From TPN DB to A/c)

4 x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC (From VTPN DB to HTPN DB)

Cutting Channel of size (40 mm x 40 mm/ 43mm x 43mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 3 mm thick Polythene pipe (without earth continuity wire) by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles incl. S&F of following pipe.[ Make-Parrot gold/geolite]

19 mm dia

25 mm dia

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [Make-Precision]

20 mm dia pipe

25 mm dia pipe

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x1 00x65mm MS (1 6SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240 x 200 x65mm MS (16SWG) switch board with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), with modular type plug top with indicator and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc..

Supplying and fixing 415 V, 16-32A per way, 8 Way Vertical TPN MCBDB with provision for FP MCCB as incommer and TP MCB as outgoing in suitable enclosure with metal door comprising of the following :- a) 160 A, 35KA, 4 pole MCCB -- 1 No. b) 63A TP 10ka, 'C'- curve MCB --8 Nos. c) Cable end box-- 2 nos. (Make-Siemens/ Legrand/ Schneider)

Supplying and fixing 415V, 250A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. (Make- L&T)

Supplying & fixing sheet metal (16SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. Earthing attachment and painting as required–(As per Drawing no. 470 of PWD Specification Book – May 1991, 4 bar 415A,400A

S & D of 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork etc. and Fixing the ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire (Make-Usha Striker PWD/Orient New Breeze(5 years warrenty)/Crompton-)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

S & F of 19mm bore GI pipe for fan down rod incl. painting drill hole etc. with 2x1.5 sq. mm. cu wire.

S & delivery 240V, 50 Hz. 300 mm. Sweep 1420 r.p.m. Heavy Duty AC Exhaust Fan (As per EPC make)

Fixing only 300 mm exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 30 cm (12") Exhaust Fan.

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with 'L' clamp and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing of single/double LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side inserted within the ceiling reinforcement and other side connected with the suitable size of bolts and nuts incl. S&F EI conduit “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. with S & F 2x24/0.20 mm flexible copper wire of 1.10 mt. length. incl. 2nos mounting kit.

Supply and delivery of 230V, Single LED tube light fittings incl. all acc. (Make:-Crompton cat no.- IGP161LT8-16 1 x T8 with 1 Nos LTT8-16 LED tube light or equivalent of Wipro/Phillips)

Supply and delivery of 230V, Double LED tube light fittings incl. all acc. (Make:-Crompton cat no.- IGP162 LT8-16 2 x T8 with 2 Nos LTT8-16 LED tube light or equivalent of Wipro/Phillips)

Supply & Fixing of 15W LED Ultra Slim Round Recess mounted type fitting (Make- Crompton cat No-LCDRC-15-CDL or equivalent of Philips/ Wipro)

Supply & Fixing of indoor type 10W LED Mirror light on wall with all accessories. (Make-philips-Meraki,Model No. 582109 )

Supply & Fixing of Full Matal Body Wall Fan complete with blades, canopy, fork, rubber bush etc as per GS (Make -Orient Tornedo wall-II ) 450 mm ( SSTORM 2)

Supply & Delivery of following size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable with 2x10 SWG GI wire. [Make -RR Kable/Polycab /Havells/Gloster/ KEI]

b) 4 core 120 sqmm[Main panel to DG panel]

b) 4 core 70 sqmm.[Main panel to VTPN]

Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

c) 4 core 120 sqmm

c) 4 core 70 sqmm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl.removing the rubbish.

c) 4 core 120 sqmm

c) 4 core 70 sqmm

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

b) 4 core 120 sqmm

b) 4 core 70 sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by ISI-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Excavation of Soft soil for installation of Earth Electrode and filling & ramming.

Extra for providing masonary enclosure on the top of the earth electrod of overall size 86.36 cm x 86.36 cm x 46 cm deep ( below the ground level ) complete with cemented brick work (1 : 6 0 of 25 cm width duly plasteredwith cement motor ( inside ) CI hinged inspection cover of size 36. 56 cm x 36.56 cm with locking arrengement , GI reducer including drilling of 46 nos 12 mm dia holes on the GI pipe .

S & Laying of 50 mm dia GI cable protection pipe (ISI-M) and necessary fittings and jointing materials as required.

Supply and delivery of 4 core 10 sq. mm. 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable (Armoured ) conforming to IS: 7098 / 1988 with its latest amendment of following size.[ Make Polycab/Havells/RR Kable]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable upto 4 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 Core 10 Sq. mm XLPE/PVC armoured cables.

Finishing of the 4 Core 10 Sq. mm XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc.and making connection to switch, BDB and BBC etc.

Supplying and fixing 32mm dia polythene pipe complete with fittings as necy. On pole muffing for cable entry.

Supply and Delivery of 9 mts long,as per specification Top dia -70mm, Bottom dia -1 55mm,(Section Length -9000mm)thick - 3mm, Base plate-(260 x 260 x 16)mm,PCD - 260mm.Hot Dip GI Octagonal pole fabricated from HT steel confining to BS EN 10025, S-355JQ along With 4 Nos. M24 x 750" 'J’ type foundation bolts, incl. S&F hot-dip galvanised Decorative type single arm detachable swan neck bracket (as per USA 009) of 1.5 mt. long fabricated from 48.3mm dia GI pipe along with the sleeve of suitable diameter to fit on the pole top incl. S&F Differential Arm Bracket (Adjustable) 1500 mm. long on one side with 48.3 OD GI Pipe. complete in all respect having 4 terminal loop stud of 32A inside the pole with inspection door and locking arrangement and 1no 6A SPMCB(Make- Legrand) as required inclusive of all.the internal connection will be from suitable size of copper conductor(/Bajaj /Lysaght Pole/Transrail/Volmant) .

Making foundation for the 9 mts GI Octagonal pole with stone, sand, cement and iron reinforcement structure (500x500x1300mm) with 12mm dia MS rod (Fe4l5 Grade), binded/welded atter cutting the required soil and making 200x200x100 muffing with sand and cement including net cement finish on the surface having piped duct for cable entry and exit etc as reqd. as per direction of EIC.

Supply,Delivery & Fixing of 120 W LED Outdoor street Light fittings with SPD protection [Brand Approved By EIC]complete with all accessories as per direction of EIC.Luminaire should be engraved or embossed with manufacturer's logo and must have minimum 3 years or higher warranty from OEM.OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head and warranty certificate shall be provided on OEM letterhead at the time of material supply. [Make- Crompton Cat No- CRP-411-120-57-SL-GL-NSG or equivalent of Phiilips /Wipro]

Inter connection between Loop box to fittings by 1.1KV 3 x 1.5Sqmm single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make - Finolex/Havells/ Polycab/RR Kabel/Gloster) Through 20mm size PVC pipe incl. necy. fittings as requires as per direction of EIC.

S&F 25W LED Gate light fitting for area lighting, on existing pole .[Make- Crompton LPTO-40-CDL-M/ equivalent Philips ]

S & Laying of 80 mm dia GI cable protection pipe (ISI-M) and necessary fittings and jointing materials as required.

S&F 240V compound light timer comprising with A)24 hour Digital timer swich (Legrand-412631)-1 no. B) 415V TP Power Contactor[Legrand-412544]-01 nos. C) 63A DP MCB Isolator,C-Curve,10KA-1No[Legrand].D) auto manual toggle switch -01nos. E) S & F LED indicator lamp (1 no. Red.) - 01 no, in 2+12way double door DB[Legrand-607711] conceal in wall incl. necessary inter connection and earthing attachment.[For roof top light Control]- Legrand

S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered/ welded with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. complete duly grouted on the parapet etc. in CC mortar ( 4:2:1), including thimble joints of 7/16 SWG wire and (25 x 6) mm GI strip with SS nuts, bolts & washers.

Supply & fixing of 25 mm x 6 mm thick GI (Hot Dip) flat / strips for Horizontal & Vertical run on wall / floor with GI shaddles as required including drilling holes, bolts, nuts, washers, etc./ and mending good the damages to building works. Horizontal run-105 mtr & Vertical run- 140 mtr

Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works: i) Length upto 0.5 Mtr

ii) Length above 0.5 Mtr

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run.

Supply & Fixing of Testing Joints by 25 mm x 6 mm thick GI (Hot Dip) strip 125 mm long on wall after making suitable arrangement to establish a clearance of 50mm from wall for making junction connection with vertical conductor and conductor from earth electrode complete with S & F GI bolts, nuts, check-nuts, spring washers etc. as required. (Rate arrived from G.S.

Earthing with 65 mm dia GI pipe (TATA-Medium) 3.0 Mts. long with welded 2 nos. half circle bracket made of GI strip (65 x 8) mm. with two holes on extended portion of the each strip of length min. 250 mm , and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. (Rate arrived from G.S.

Excavation of soil for installation of Earth Electrode and filling & ramming as to GS. (For morum soil)

Supply, Laying & Fixing of 50mm x 6mm galvanized (Hot Dip) steel strip in underground trench for interconnection between the Earth Points by joining (As per item no 11).

Jointing for Horijontal & vertical run of GI strip through welded joint of (25 x 6) mm or (50 x 6) mm GI Strip to Lap joints/ 'T' joints, etc. and painting the joints with 2 (two) coats of bituminous paint. (NS)

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

S & f 415 V ,16-32A per way,6-way Vertical TPN DB-MCB DB for laxic MCB having IP-43-IK09 with metal door four pole MCCB as incomer and TP MCB as outgoing in suitable enclosure with metal door, comprising the following a) 125A, 35KA, FP MCCB -1 no b) 63A, C' curve, 10KA, TP MCB - 6nos. d) Cable entry box-2 nos. Make- Siemens (8GB31572RC)/ Schneider/ Legrand.

Supply & Delivery of following size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable with 2x10 SWG GI wire. [Make - Finolex/Polycab /Havells/Gloster/ KEI]

b) 4 core 35 sqmm

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/ surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

c) 4 core 35 sqmm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl.removing the rubbish.

c) 4 core 70 sqmm

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

b) 4 core 70 sqmm

Supplying and fixing 4 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supplying and fixing 415 V MCB of Breaking capacity 10 kA & C characteristics on din rail of existing DBs and necessary connection [Make: Legrand, Schneider, ABB, Crabtree] FP (63A)

Supply and delivery of 1.1 KV grade, 4 Core 16 sq mm. XLPE Insulated & Sheathed Armoured Aluminium Conductor cables.[Make: UNIVERSAL, HAVELES, POLYCAB, RR KABLE]

Laying of cable upto 4 core 16 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture- proof entry of XLPE/PVC armoured cables as below For 4 Core upto 16 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials For 4 Core upto 16 sqmm

Supplying and fixing 2 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supplying and fixing 16A, 240/415 V DP MCB of Breaking capacity 1 0kA & C characteristics on din rail of existing DBs and necessary connection

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x1 00x65mm MS (1 6SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Distribution wiring in 1.1 KV single core stranded 'FRLS',PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit 'FR' incl. necy. fittings as required. (Make for wires :- RR Kable, Finolex, Polycab). 2x22/0.3 (1.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC as ECC

Supply & Fixing of 240V 20W LED bulkhead light fittings with necessory fixing materials and necy. connection by 2x1.5mm² PVC insuld. Cu. Wire & painting (Make:: Philips)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by ISI-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Excavation of Soft soil for installation of Earth Electrode and filling & ramming.

Extra for providing masonary enclosure on the top of the earth electrod of overall size 86.36 cm x 86.36 cm x 46 cm deep ( below the ground level ) complete with cemented brick work (1 : 6 0 of 25 cm width duly plasteredwith cement motor ( inside ) CI hinged inspection cover of size 36. 56 cm x 36.56 cm with locking arrengement , GI reducer including drilling of 46 nos 12 mm dia holes on the GI pipe .

S & Laying of 50 mm dia GI cable protection pipe (ISI-M) and necessary fittings and jointing materials as required.

Supply and Fixing of sign board acrylic signages i) Supply and fixing of angle iron frame fabricated from 40 mm x 40 mm square four nos hollow bar with cross and radial support including one no 40x40 mm angle iron support in the middle for the Sign board of following size with suitable three nos. crosss angle support welded with 4 nos angle hook in equal space for fixing on the structure with all necessary welding and fabrication. The structure shall rest in both sides with proper welding as per instruction of EIC. ii) S&F LED Sign Board made 3 mm thick ACP Sheet (Alstrong/ Aludecor) finished with approved metallic colour as back ground (blue) after router cutting. The riser structure also shall be covered with ACP Sheet.& appx 6-7 inch depth (Both size ACP sheet) iii) S&F Special type of imported acrylic English letter appx 50 mm thickness flushed on the ACP board made on imported acrylic ACAST sheet. The mater appvd by EIC letter font shall be in horizontal line as mentioned.

iv) S&F SMD LED inside the board and to run for each letter including wiring , soldering etc and fixing the SMPS properly with the specification of the SMD 1.LED colour : White/ Red/ Blue (make-samsung /Nichia /Cree/ Hisine ) 2.Stright : 2 or 3 nos LED per module 3. Luminous Flux : 140 LUMEN 4. Life : 70000 burning hours 5. Visibility: 100 meter atleast normal eye 6. Power Supply: 1.2 watt to1.6 watt per module 7.Input : 230A.C , Output : 12V DC 8.Shape of LED : recrangle or square 9. Grade : IP - 65 v) S & F LED Power supply 300/ 400W IP65 50/60Hz frequency, 108 to 305 VAC driver power supply other electrical accessories the panel prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd ) vi) Cost of painting of MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping with emery paper properly make ICI/Asian paints vii) Cost of erection of scaffolding for fixing the Signage viii) Testing and commissioning of the LED board as per following nomenclature

Supply & Fixing of 16 SWG GI Sheet in the back side of Sign board and fixing the sheet on the structure with all necessary welding and fabrication. as per instruction of EIC (15' x 5' x 5 ") = 75 Ft

Cost of carrying of the LED Glow sign board from work shop to site

Supply, Installation, Testing & Comissioning of cubical type L.T. Distribution panel board of required size, wall/Stand mounted compartmentalized with maple arrangement having rigid & self supporting structure fabricated from 3.15 mm thick CRCA sheet steel with M/S angle frame. The panel board consisting of the following switches and cable Allay. [Dim. - 1500mm x 1100mm x 450mm ] A) Incoming Arrangement. switch disconnect or fuse ( panel mounting cubical type) conform to IS 13947 in open execution three pole & Neutral, 50HZ, 415V 415 Amp with 3 nos 415 Amp DIN type HBC fuse link , [L&T/ ABB make]--- 1set B) Bus Section: 415 V 800 A. electrolyte grade tinned copper bus bar, with vertical section of size 4x( 2 X 40 X 5) mm for Phase RYB, neutral bars & Bar for earth. A bus bar shall be fixed with FRP chair & the entire bars are insulated with PVC heat Sinkable sleeve of suitable size & color as per direction of E.I.C. C) Inter connection of bus bar. 415V 315A 4pole cubical panel type On load change over ,[L&T/ABB make]- - 02set D) Outgoing arrangement: i) switch disconnect or fuse (panel mounting cubical type) conform to IS : 13947 in open execution three pole & Neutral 50HZ, 415 Volt 160 Amp with 3 nos 160 Amp DIN type HBC fuse link ,[L&T/ABB make] - --- --- --- 02 set ii) Switch disconnector fuse (panel mounting cubical type) conform to IS: 13947 in open execution three pole & Neutral 50HZ, 415 Volt 125 Amp with 3 nos 125 Amp DIN type HBC fuse link, [L&T/ABB make.]. - --- --- --- 03 set iii) Switch disconnector fuse (panel mounting cubical type) conform to IS: 13947 in open execution three pole & Neutral 50HZ, 415 Volt 63 Amp with 3 nos 63 Amp DIN type HBC fuse link, [L&T/ABB make.]. - --- --- --- 03 set E) Metering panel: a) S&F current transformer of size 200/5A Kappa make……………3nos

b) LED Multifunction meters [ ABB make model -DMTME-I-485]...... 1 nos c) LED indicator [R,Y,B]…. 3 nos d) S&F Danger board e) connection with suitable size copper wire. F) Cable Alley: Cable entry arrangement will be provided in the cubical panel in vertical position of size 1000mm x 150mm x 300mm with 200 Amp capacity 4 way AC/DC connector indicating phase & neutral for each outgoing main switches & gland plate must be placed at the bottom of the panel with detachable type as per direction of E.I.C. H) Painting. The complete panel board shall be painted by 2 coats of powder coated synthetic enamel Paint over two coats of R.O. primer of Approved make & brand & color as per Direction of E.I.C. I) Constructural Details: All incoming & outgoing panel mounted cubical Switch disconnector fuse shall be housed in Respective compartment with hinged & gasketted Door at front. All doors shall have Panel lock Arrangement. The panel shall be properly Gasketted to prevent ingress of dust & moisture & Remain. Busbar will be properly arrange & all Switches shall be fixed by M.S. nuts & bolts On angle /flat iron frame base.as per direction of E.I.C.

MAHESWAR ELECTRICAL INDUSTRIES (BID ID -5720745)

GHANASHYAM ELECTRIC STORES (BID ID -5720903)