ADDN/ ALTN TO CERTAIN OFFICES AND CONNECTED SERVICES IN BLDG NO RA-1 OF HQ EASTERN COMD UNDER GE (FW) KOLKATA

Amount

Dismantling of loose concrete from RCC members to shape 50 mm for receiving polymer modified member/micro concrete etc all as per manufacturer instruction (Measurement shall be surface area of member).

Cleaning rust from rusted steel bar by using Rebaklens RR rust remover & wire brush : Rust remover cleaning rust from rusted reinforcement bars by using acid base Rebaklens RR rust remover painted with brush and removing rust with flex, (after 24 hrs of application of rust remover) with the help of wire brush, sand paper or any other suitable devices and thoroughly washed with water with the help of pressure jet and allowing it dry complete all as per manufacturer instruction of Make : Fosroc/ Sikka. (only area of cleaned steel bar shall be measured for payment).

Anchoring system for rebaring by normal steel bar :- Rebaring by normal steel bars : introducing new reinforcement bars for structural connections in RCC, fixing the reinforcement in position using Hilti HY 150/ Fosroc Lockfix E 75 chemical (Rate shall include cost of labour, epoxy cartridges, plastic nozzles etc complete including cleaning the drilled holes of loose dust by blowing air, all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka. (The cost of reinforcement shall be payble separately).

Coating applications Anti Corrosive coating for corroded reinforcement & newly added steel bar :- Providing mixing and applying over reinforcement bars Nitozinc primer antirust agent all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/ Sikka (Dosage/ coverage as per manufacturer specification of two component epoxy based zinc rich primer steel as a protective coating to steel reinforcing bars in concrete with total zinc content in dry film > 90% by volume and DFT per coat>50 microns).

Bonding Agent :- Providing and applying bonding agent of approved brand Fosroc Nit bond EP (Std) coverage and all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka. (Mixed density : 1.48Kg/ltr, adhesive bond strength to be >2.50 MPs) epoxy bonding agent.

Polymer modified mortar Rendroc SP 40 for patch repair :- M&L polymer modified concrete upto 25 mm thick application Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar, specifically of PMC (Free flowing non shrink repair and could get compressive strength of 35 Mpa at 28 days including plaster and all as per manufacturer instruction and work will be carried out by manufacturer rep only

Cutting Holes in brick walls in cement mortar for inserting holdfast ,pipes or steel sections and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n exc one brick etc. all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe 410W (Gde E-250) quality 'A' etc complete all as specified and directed.

M&L welded steel wire fabric weight n exc 4 kg/sqm complete and fixed to wood or steel members, all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for Excavating in post holes (or similar holes) on soft /loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons, as in platform etc. laid dry and pointed in any mortar all as specified and directed.

M&L for 18-20 mm thick Granite slab of approved quality (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.as specified.

M&L for Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified.

S&F Pre- painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc., complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:3 on vertical surfaces(concrete/brick wall) for backing coat complete all as specified and directed.

M&L Vitrified ceramic tiles dark shade/double charged/ultra charged of 9 or 10 mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.28 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item no 20, here-in-before but as in skirting on vertical surfaces.

S&F Non - skid Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement complete including 15 mm thick screed bed of cement mortar 1:6 complete all as specified and directed.

S&F Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm/ 600x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in1:4 cement mortar complete all as specified and directed.

M &L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for 20 mm thick rendering in cement mortar (1:4), in two layers, each 10 mm thick, to fair faces of brick or concrete wall surfaces, top layer mixed with water proofing compound (@ 3 % by weight of cement or as per manufacture's instructions), finished rendering surface even and smooth(without using extra cement). (Note : Water proofing compound to be measured and paid separately as "Supply only")

Supplying Integral water proofing compound.

M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of OBD over alkali resistant primer after applying 2 mm thick wall care putty on walls, complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.

M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, with both face is covered with deco rative face veneer with lipping/frame to match as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet (used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet) reinforced with M.S. Square tube, The door profiles are to be reinforced with 19xl9mm M.S. Square tube. EPDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed. supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet on both side & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification &\ drawing all as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Aluminium hydraulic door closer, designation No. 3, universal type, comply with IS 3564-1995 suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. Closers shall be universal type suitable for both anticlockwise and clockwise doors, without any change in parts of the closers as directed and specified.

S&F of 100 mm butt hinges (type B-21), extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed as directed.

S&F Floor door stopper of Brass alloy body and tongue(having 140 mm overall length of cover plate) , anodised, with hard drawn steel spring, fixed in floor

S&F 300mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts polished, complete all as specified and directed.

S&F Aluminium anodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including 6mm dia Gl (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3 mm size 60 mm long and expansion hold fasteners 12 5mm dia 40 mm long complete all as specified.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions. All as specified and directed.

M&L for POP ceiling cornice of 4-6 inch width with approved design. All as directed and specified.

M&L for Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. All as directed and specified.

M&L anodised aluminium snap grid with powder coated frame work for false ceiling of size 605x605 mm including 6mm dia Gl (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3 mm size 60 mm long and expansion hold fasteners 12 5mm dia 40 mm long complete all as specified.

M&L 4mm non asbestos fibre cement building boards flat, fixed or laid/inserted to timber/Gl/aluminium frame work with screws complete and applying two coats of Oil bound distemper over a coat of primer complete all as specified

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelim PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F “L” type (90degree) Decorative PVC Beading of size 20mm x 10mm with wood moulding design complete all as specified and directed.

Dismantling of Aluminium framework in partition, door or in any position with all connection items complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed.

Taking down 15 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding n exc 10cm girth. All as specified and directed.

M&L for Cement concrete of TYPE E2 (1:5:10) of aggregate size 40 mm in foundations, filling and mass concrete after applying the bitumen primer for water proofing of floor with providing a bend if required. All as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 , type B0 using 12.5 mm graded aggregate as in sub base for floor complete all as specified and directed.

Supplying and laying of 15 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including elbows, Tank adapter, union and Tee's as required. complete all as specified and directed.

Supplying and installing uPVC- 1sash casement door made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 69mm x 50mm and sash 58mm x 93 x 54mm with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 (without glass)5 and Environmental Management System ISO 14001-2015 Make Kommerling or equivalent model in Fanesta & in other approved makes.

M&L 5 mm thick Toughned glass as in hinged doors, partitions, windows, automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified

S&F Female Brass Threaded Adaptor (FTA/ FBTA) for 15 mm bore pipe to fix taps, stop cock etc., all as directed and specified.

S&F Water closet (EWC) with Wall Hung Cistern, Drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, Hinges, Fixing Accessories and Accessories set, Size: 350x480x395 mm, S Trap complete all as specified and directed. (MAKE : JAGUAR, Cat no. CNS-WHT-551SNPP184LZ or equivalent make specified in tender

M&L for Surface excavation on soft and loose soil n.exc (not exceeding) 45 cm deep and averaging 15cm deep and getting out all as directed and specified.

Supplying and laying of 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls all as directed and specified.

S&F 110 mm bore PVC (SWR) Bends of any radius as required. All as specified and directed.

S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm bore. All as specified and directed.

S&F 110 mm bore PVC (SWR) 'P’ trap as specified and directed.

S&F 110mm PVC (SWR) WC connector with lip ring all as directed and specified.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as directed and specified.

S&F PVC (SWR) multi floor trap with grating (of 75 mm bore) including jointing with solvent cement all as specified.

S&F PVC (SWR) floor trap, plain with grating (of 75 mm bore) including jointing with solvent cement all as specified and directed.

Rifixing of anodised aluminium snap grid using old 4mm non asbestos fibre cement building board with powder coated frame work for false ceiling of size 605x605 mm including 6mm dia Gl (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3 mm size 60 mm long and expansion hold fasteners 12 5mm dia 40 mm long complete all as specified.

S&F 32 mm bore Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) as complete all as specified.

S&F Bottle trap (32 mm bore) of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms). complete all as specified.

S&F Under Counter Basin with Fixing Accessories of make Jaguar, Size: 605x430x200 mm, Shape: Oval complete all as specified and directed.(Make :- Jaguar cat no NS-WHT-705 or equivalent make specified in tender

S&F 15 mm bore Pillar Cock Auto Closing System with 65mm Extension Body complete all as specified and directed. (MAKE : JAGUAR, Cat no. RS-031L65/ or equivalent make specified in tender.

S&F15 mm bore chromium plated 2 way bib cock complete all as specified and directed. (MAKE : JAGUAR, Cat no. LYR-38041/ PARRYWARE or equivalent make specified in tender.

S&F Chromium plated health faucet (hand shower) with 8 mm dia, 1.2 mm long flexible tube & wall hook with NRV (back flow preventer) all as directed. (MAKE : JAGUAR, Cat no. ALD-577/ PARRYWARE or equivalent as approved by Accepting Officer)

S&F circular type soap dish holder as directed and specified. (MAKE : JAGUAR , cat no. CAN-1131N or equivalent make specified in tender

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe (all fittings); including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F 15 mm bore long body Bib Cock with Wall Flange complete all as specified and directed MAKE : JAGUAR , cat no. COP-107PM or equivalent. Make specified in tender.

S&F Aluminium glass railing for stairs, glass made up of 6 or 8 mm thick toughened glass with colour etching including all necessary clips, railing, balusters etc. with taking down old stair railing complete all as specified and directed.

M&L for 100 mm thick Paintable water resistance WPC corner bidding as approved design complete all as specified and directed.

M&L for 12 mm thick seamless waterproof and termite proof WPC louvers wall panels fixed with probond adhesive and screwed to the wall using clips with corner beadings etc., complete all as per manufacturer's instructions, all as specified and directed.

M&L for preparation and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43/litre/10 sqm over and including priming coat of exterior primer applied @ 0.90/litre/10 Sqm over 2 mm thick exterior wall care putty of new surfaces, all as specified and directed.

M&L for preparation of old decorated plastered surfaces or un-plastered ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of surfaces of walls and applying two coat of Oil Bound Distemper over a coat of alkali resistant primer and 1 mm thick wall care putty after complete removal of existing treatment, all as specified and directed.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.

E/M Portion Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting modular type switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage) (a) One light point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One 3/5 pin socket outlet, 5 Amp on the same board with other switches

All as per item 2 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuity wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

Description all as per item No 2 above but using 4.0 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 4.0 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Bell push 6A, 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 2 module complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and directed.

S & F Modular type White cover plate with frame 6 module complete all as specified and directed.

S & F Modular type White cover plate with frame 8 module complete all as specified and directed.

S & F Modular type White cover plate with frame 12 module complete all as specified and directed.

S & F Modular type Metal Flush box 1/2 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 6 module complete all as specified and directed.

S & F Modular type Metal Flush box 8 module complete all as specified and directed.

S & F Modular type Metal Flush box 12 module complete all as specified and directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.

S & F in repair LED Ceiling light fitting 35/36 W recess / Surface type as in repair, minimum colour temperature 6500K, with suitable driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make: Crompton LCTLSN-36-CDL or equivalent make specified in tender.

Supply and fixing LED lights fitting 1x 20W, 220V,warm light AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED decorative Wall lights fitting 4 W x 2, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable E-14 LED 4w X2 complete all as specified and directed. Make: PHILIPS 32033/11/66 Aquafit wall light(Chrome and Metal,12W)-DC or equivalent make specified in tender.

Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed.

All as per Srl. Item No. 129 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Srl. Item No. 129 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

Taking down of Old MCB DB any type any size including MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site.

S & F TP&N Vertical Loadline Dbs are fitted with Bus Bars, Neutral Links, Blanking Plates 6 way double door DB LL 4W DD VERT W/O MCCB. complete all as specified and directed.

S & F MCCBs 415V, 16KA, 4 Pole 100Amps.complete all as specified and directed.

S & F Double door sheet metal enclosure for DBs(Premium range) for mounting of MCB for 240 Volts 8 Way with 100 Amps rated copper bus bar, single pole and Neutral complete all as specified and directed.

Supply only MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply only MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

S & F in repair AC short circuit protection motor starter 20 Amps capacity AC 230 Volt complete all as specified and directed.

S & F LED down hanging light fitting 9 W, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable E-27 LED 9w X1 complete all as specified and directed. Complete all as specified and directed.

Supply, Laying and testing for replacement of XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall with saddles/Flat iron clamps as per site requirement /passing through pipe/pole complete of the following sizes and cross sectional area :- (a) 50 Sqmm, 3.5 Core

S&F Vento Jet Horizontal Auto Exhaust fan AC single Phase 230 V / 240V 50 Hz of size 150 mm Sweep brushed steel finish / Off White, Automatic front shutter High suction capacity, silent operation, wall, ceiling and glassmounting, Removable & Screw less front for easy cleaning and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

S & F exhaust fan 250 mm sweep, AC single Phase 230 / 240 volts, metal body with louver shutters and connecting up with and including twin core twisted flexible copper conductor cable of suitable dia ,nut bolt and accessories, and winding, pending etc connecting up including taking down with re -fixing provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

RADHA ENTERPRISE (BID ID -3355866)

ARJUN DAS VALECHA (BID ID -3356750)

M/S S. K. SARKAR (BID ID -3356043)

SENCO (BID ID -3354613)

GAYATRI ENTERPRISE (BID ID -3354736)

R T BUILDERS (BID ID -3357082)