Repair of public toilet at for Gaushala by providing and fixing of Public Health Service in Public Toilet at Gaushala Indl. Area Phase-I, Chandigarh

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests (DSR No.17.1.1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. (NSI)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore (DSR No.18.53.1)

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore (DSR No.18.21.1.1)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore (DSR No.18.51.1)

Providing and fixing in position 32 mm i/d CP Bottle trap for wash basin complete in all respects. (NSI)

Providing and fixing soil, waste and vent pipes 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. (DSR No.17.35.1.1)

Providing and fixing soil, waste and vent pipes 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729. (DSR No.17.35.2.1)

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.38.1.1)

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm dia Sand cast iron S&S as per IS - 1729 (DSR No.17.38.2.1)

Providing and fixing plain bend of required degree. 100 mm Sand cast iron S&S as per IS - 1729 (17.39.1.1)

Providing and fixing plain bend of required degree. 75 mm Sand cast iron S&S as per IS -1729 (DSR No.17.39.2.1)

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.43.1.1)

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75x75x75 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.43.2.1)

Providing and fixing collar 100 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.57.1.1)

Providing and fixing collar 75 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.57.2.1)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989 (DSR No.17.60.2.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 15 mm dia. nominal bore (DSR No.18.10.1)

20 mm dia. nominal bore (DSR No.18.10.2)

25 mm dia. nominal bore (DSR No.18.10.3)

Cutting holes upto 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular) bricks (DSR No.18.76.1)

Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc (DSR No.18.78)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20mm nominal bore (DSR No.18.17.1)

Providing and fixing gun metal non- return valve of approved quality (screwed end) 25 mm nominal bore Horizontal (DSR No. 18.19.1.1)

Providing and fixing PVC waste pipe 32 mm make up to floor trap isi mareked complete in all respects. (NSI)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 600x850 mm and 45 cm deep for pipe line with one or two inlets With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No.19.30.3.1)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore (DSR No.18.46.1)

Providing and fixing GI tank nipple AVR/ SVM make complete in all respects 20 mm nominal bore (NSI)

25 mm nominal bore (NSI)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR No.17.31)

Providing and fixing 8mm dia C.P./S.S.jet with flexible tube up to 1 mtr long complete ( DSR No.17.16A)

Providing and fixing PTMT towel ring traper olded shape 225 complete ( DSR No.17.72)

Providing and fixing laminated Sun board of different size indicating information complete 12"X8" (NSI)

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes. Weighing not less than 60 gms (DSR No.17.75)

Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms (DSR No.18.63.1)

Providing and fixing PTMT grating of approved quality and colour Circular type.100 mm nominal dia (DSR No.18.58.1.1)

Providing & fixing extension nipple for tap and angle cock complete in all respects 15 mm dia. (NSI)

Please Enable Macros to View BoQ information