REPAIR/MAINT OF PERIMETER SECURITY LIGHTS AND EARTHING OF ELECT SUPPLY, WATER SUPPLY, AC PLANT, SOLAR PLANT INSTALLATION AT DRONACHAL BHOPAL.

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of caste and getting out in Hard / dense soil disintegrated rock complete all as specified and directed.

Returning , filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/disintergrated rock complete all as specified and directed.

Removing excavated material not exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed

M&L for clean, dry, unwashed sand filled in trenches for cushioning to cable complete all as specified. NOTE:- The depth of cushion after punning shall be measured.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

Taking down old/ unserviceable UG cable of any description of size upto 50 Sqmm 2/3.5/4 core complete all as directed. Note:- (i) Excavation / Earth work , sand & Brick shall be measured and paid seprate under relavent items. (ii) New Cable shall be used if required at site and paid separetly under respective items.

Relaying the serviceable cable taking out from item No 6 in same or other places after tracing out the fault with the help of megger and rectifying the defects complete all as specified and directed.. Note:- Straight through joint shall be measured and paid seprate under relevent item of schedule.

Supply and Laying in repair XLPE insulated armoured heavy duty electric under ground cable aluminum conductor 1100 volts grade in trenches/on pole through sleeves etc. of 10 Sqmm 4 Core complete all as specified and directed.

Supply & fix heat shrinkable type straight through cable joint kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 10/16 Sqmm 2/4 core complete all as specified and directed.

Supply & fix heat shrinkable type straight through cable joint kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 25/35/50 Sqmm 3.5 core complete all as specified and directed. Note for item No 9 & 10 :- (i)The suitable excavation shall done by the contractor for making the cable jointing kit and make the cable functional. (ii) Excavation, returning filling and remvoning shall be measured and paid seperately under the relevant items.

M& L for MS flat iron for fabricating of clamp of various size as required at site for mounting/fixing of brackets and junction box on pole complete all as specified and directed.

M&L for cutting of bituminous road/ floor for laying of pipe/cables n. exc 1.5m wide and n. exc 1.5m deep including refilling with material and watering Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using400 kg of cement per cubic metre,thickness of concrete 25 cm or less complete all as specified and directed.

Taking out short circuited / burnt out existing aluminium/copper wire and supply & replace weather proof PVC insulated multi stranded copper conductor1.5 Sqmm flat / round,three core 1100 volts grade complete all as specified and directed.

S&F in replacement of GI Pipe medium grade on road/pole/wall/floor for cable protection with fixing arrangement size 40mm dia complete all as specified and directed.

M&L for scratching out old bubbled paint, finishing the surface with one coat of aluminium primer & two coats of aluminium paint of 1st quality to street light steel tubuler poles of any height 7/9 mtr , any type (double swan, single swan) all as per site above embedded level, including pole number writting with white colour enamel paint on black colour circular base) with two coat of lime wash on pole coping complete all as specified and directed.

Supply & replace street light junction box of size 240 x190 x110 mm inner dimension made out of FRP sheet with weather proof hinged doors, locking arrangements horizontal / vertical operated with 6 amps MCB SP, including 25mm x3mm MS flat iron clamps duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed including dismantling of existing unserviceble box. Note : Ms clamp shall be measered and paid separetly under respective item

M&L for replacement of LED aviation light luminaries comprising of aluminium housing with polycarbonate enclosure complete Make : Bajaj / Philips/Havells complete after taking down the old unserviceable one complete all as specified and directed.

Supply and fixing GI bracket 1.2 mtr long 40 MM dia complete with MS clamp bolts and nuts for fixing of bracket complete all as specified and directed.

Cutting and Trimming of tree branches touching LT over head lines and trimming of branches in each span of LT over head line complete all as specified and directed. Note:- (i) The item shall be repeated after three months from the date of first trimming as directed by Engr in charge. (ii) Measurement and payment will be made for each cutting/trimming as a job.

Supply and fix in repair LT cable joiniting kit 1100Volts grade cable for indoor/outdoor joint heat shrink type complete with jointing material and accessories suitble for 4 core XLPE armoured aluminium conductor cable of size 10 to 70 sqmm complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed wire, one twin core cable flat 4 Sqmm complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed wire, one twin core cable flat 6 Sqmm complete all as specified and directed.

S&F in repair of Automatic Street Light Switch Three phase with Nature Switch-03 as the controlling unit for automatic switching of street lights based on LUX level of Natural light. The Sensor (Nature switch) along with suitable power contractor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust proof, Electric Shock proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) confirming to IP54. The contractor, MCB and circuit Wiring should suitable enough to take load 5 KW equally distributed over 3 phase (4 KW/Phase). The contractor rating 25 Amps (4-pole) and MCB(single pole) rating : 20-25 Amps(SP-03 Nos), complete all as specified and directed. Make. Nature Switch Model No SWADEEP-02EC 5 KW3P or equivalent makes in Legrand/L&T/GE.

S&F in repair of Automatic Street Light Switch Single phase with Nature Switch-01 as the controlling unit for automatic switching of street lights based on LUX level of Natural light. The Sensor (Nature switch) along with suitable power contractor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust proof, Electric Shock proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) confirming to IP54. The contractor, MCB and circuit Wiring should suitable enough to take load 5 KW . The contractor rating 25 Amps (single-pole) and MCB(single pole) rating : 20-25 Amps(SP-01 Nos), complete all as specified and directed. Make. Nature Switch Model No SWADEEP-02EC 5 KW1P or equivalent makes in Legrand/L&T/GE.

M&L for replacement of LED Street light fitting 1x 45W energy saving and environmental friendly long life LED street light made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK 07 alongwith electrical connection and testing complete all as specified and directed.

M&L for replacement of LED Street light fitting 1x 60 W new generation energy saving and environmental friendly long life versalite pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seprate driver compartement with IP66 protection and impact resistance of IK 07 with 10 KV built-in surge protection device complete all as specified and directed.

M&L for replacement of LED flood light fitting 1x 100 W energy saving and environmental friendly long life exclusive innovative die -cast aluminium IP66 flood lightsuitable for highlighting architectural facade and general purpose lighting complete fitting with existing flood light incl taking down complete all as specified and directed.

M&L for Chemical earthing as per "ASHLOK" make model T-39, copper coated safe earthing electrode (SEE) of 3 mtr lenght with inner pipe of 40 mm dia and outer pipe of 80 mm dia with min 80-100 micron coating, filled with black fill compound mixed with soil and high specific gravity crystallin conductive mixture (CCM) of grade `B`filled inside the earth electrode.including drilling of hole of 150 mm dia bore with boring machine in hard rock and filling the bore hole with black cotton soil level i,e below the electrode bottom level , including PCC earth pit and Copper earth strip of 32 x 6mm with GI tubing light grade for protection up to 7.5 mtrs complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised copper strip complete all as specified and directed.

M&L for earthing complete with copper earth plate electrode size 600x600x3.15mm thick burried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron strip 20x3 mm earth lead by means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point complete all as specified and directed including testing on completion. NOTES:- The unit rate includes for protection pipe and GI strip dia from top of earth plate upto 5.00 meter above groung level.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20x3mm galvanised copper strip complete all as specified and directed.

PRAGATI ELECTRICALS AND ELECTRONICS

M/S RAKESH TRADERS

Samaksh Enterprises

ELITE WORKS

M/S Shanti Enterprises

SHOURYA ENGINEERING ENTERPRISES

MODI CORPORATION

RAJPATI CONSTRUCTION

UMESH ENTERPRISES