PROVN OF HARDSTANDING NEAR BLDG NO T 19 RATION STORE AND 02 X GARBAGE BIN NEAR BLDG NO T 12 T 36 T 27 AND T39 AT CRLC LINE IN RA AT CAD PULGAON

Amount

Surface excavation n exc 30cm deep and averaging 15cm and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m deep and getting out in hard/dense soil complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundation concrete complete all as specified and as directed.

M & L for fly ash brick work in old size straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified and as directed.

M & L for hard core of gauze n exc 63mm deposited, spresd in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed

M & L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base course to floor complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 10 mm thick plastering in CM 1:4 on brick masonary for receiving wall tiles complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick work surface or concrete surfaces to be finished the surface even and smooth without using extra cement complete all as specified and as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters purlins where connected to common rafter fixed with angle cleats or other connecting plates including welding etc conforming to grade Fe-290 (Gde-E-165) all as specified and as directed.

S&F Mild steel door frame of size 50x50x5mm and steel shutter of size 45x45x5mm incl tie bar of 10mm dia deformed steel, MS flat iron 40x5mm holdfast and 1.60mm thick MS sheet covering complete incl drilling holes, welding either hooks and hinges or steel hanging door fittings etc confirming to Fe 290 (Gde E-165) complete all as specified and as directed.

All as per item No 13 above but for windows/ventilators frame of size 35x35x5mm and steel shutter of size 30x30x5mm and MS flat iron 25x5mm hold fast etc confirming to Fe 290 (Gde E-165) complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregates) as in bed block to hold fast complete all as specified and as directed.

S&F expanded metal cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples of weight n exc 4 kg per sqm complete all as specified and as directed.

M&L for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts all as specified and as directed.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L preparing surfaces and applying two coats of cement base paint over a coat of primer.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base course as in path/plinth protection finished even and smooth without using extra cement.

Returning and filling in excavated soil incl spreading, levelling, watering and ramming in layers n exc 25cm thick complete.

Removing surplus excavated soil to a distance n exc 50m from starting point and depositing where directed at a level n exc 1.50m above base.

Excavation over areas, n. exc 1.5 M deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for 150 mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stone, interstices filled,surface formed and rolled and consoildated to required gradient and camber complete all as specified and as directed.

M&L for 100 mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregates) as in floor/pavings finishing even and smooth without using extra cement complete all as specified and directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' for 100mm thickness of concrete slab complete all as specified and as directed.

SHREE CONSTRUCTIONS

M/S L M Chourasia

Arnav Enterprises

M/S JAI BHAWANI CONSTRUCTIONS

Bidder Name

M/S L M Chourasia

SHREE CONSTRUCTIONS

Arnav Enterprises

M/s Chandak Constructions, Pulgaon

M/S JAI BHAWANI CONSTRUCTIONS