CSC shifting 3rd floor

Amount

Dismantling the ANG partition including dismembering the same and stacking the materials within the campus as directed by the Engineer in Charge.

Dismantling the false ceiling/ flooring work including removing the ceiling fastners(wherever possible), closing the holes and stacking the materials in the store within the Exchange campus all complete as directed by the Engineer in charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note :- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.

Demolishing brick work in cement mortar including stacking of serviceable materials and disposal of unserviceable materials upto a lead of 50m.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. A) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ).

Providing and fixing UPVC window frame with sliding shutter ( approved make, design and size )and 4mm thick plain glass panes, locking arrangements,handles and fixined to the opening with suitable GI fastners etc complete as directed by the Engineer in charge.

Transportation of partition materials from St.thomas mount exchange store in first floor to KK Nager TE building 3rd floor including seggregating, stacking loading unloading and stacking etc complete as directed by the Engineer in Charge. ( Partition materials upto 2mt weight, Single load)

Providing and fixing aluminium work for partition with available aluminium sections,prelaminated particle boards and Glass panels in panelling supplied departmentally with necessary new expansion hold fastners, screws,clips etc. including necessary filling up of gaps at junctions, top,bottom etc.all as directed by the Eng-in-charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. a) With cement mortar 1:4 (1 cement : 4 fine sand).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a) 300x16

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 125mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. A)Single rubber stopper

Shifting of office files, office equipments and furnitures from one place to another place including bundling and binding the files, filling in gunny bags, packing the furnitures and office equipments for preventing from damge stacking counting numbering the bundles/items etc complete all as directed by the Engineer in Charge. The item includes stacking, shifting from different floors to ground floor, loading, transporting unloading and stacking at required floors in KK nagar TE building.

From Nungumbakkam Admin building 2nd floor to KK nagar 3rd floor

Providing false ceiling with available materials with new fastners, including cutting to required size the available sections and boards etc complete as directed by the Engineer in Charge.

Providing and fixing to window glass panes Sun control film (of make by Garware or equivalent with market name Defendo, Charcol45 ) of 2MIL thickness with necessary adhesive as directed by the Engineer in Charge.( glass pane area will be measured for payment)

Dismantling the work station partitions( 1.5mx1.5m or less), vertical and horizontal boards, clamps including key board slider and stacking the materials at store within the exchange campus.

Providing work station partitions( 1.54mx1.5m or less),with available vertical and horizontal boards, clamps including fixing key board slider with available or new screws and bolt nuts ect complete as directed by the Engineer in Charge.

Dismantling the runway upto a length of 11m,fixed to wall and closing the holes with cement mortar, stacking the serviceable materials at astore within the campus as directed by the Engineer in Charge.