SPECIAL REPAIR AND REPLACEMENT OF MECHANICAL LAUNDRY AT BLDG NO P-363 INHS DHANVANTARI UNDER AGE EM-I AT GE MINNIE BAY

Amount

Supply, installation, testing and commissioning of Hygienic Barrier, High Spin Free Standing, Washer Extractor of 30 Kg Capacity, electric heated having overall approx dimensions 1035 x 1120 x 1450 mm or as per OEM recommendation with microprocessor based fully automatic programmable type with minimum G factor 350, 1:9 loading ratio, inner-outer drum made up of 304 ASTM 240 grade 304 2B prime quality steel with outer drum thickness 2 mm and inner drum 1.5 mm thick, operated by 3.7 KW / 5 HP, 415 Volts, 50 Hz electrical operated motor with VFD control, SS die pressed door with electromechanical interlock,and suitable size PPR pipes as per OEM recommendation alongwith necessary connections for Hot / Cold water inlet connections along with valves and outlet drain including control Panel Switch gear with VFD type starter, motor protection relays, single phasing preventer, reverse phasing, with indicators etc. and MCB of suitable rating for Electric incoming connection to the Machine and necessary foundation complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of Drying Tumbler Machine 30 Kg. capacity compete body in Galvanised sheet as per OEM design / recommendations, front loading type, electric heated with heater coil 24 KW finned type heaters tubular heating elements made up of SS pipes & protection given through digital temparatue controller & thermostat, having overall approx dimensions 1050 x 1525 x 1980 mm or as per OEM recommendation and size of inner basket dia 950 mm x depth 950 mm, volume 673 ltrs or as per OEM recommendation made up of 1.5 mm thick SS 304 grade for side / lifter & 1.2 mm thick SS 304 grade for periphery of inner basket, outer drum made up of 1.2 mm thick GPSP sheet for rust proofing and insulated to prevent heat loss, tumbler driven by 0.75 KW / 1 HP motor and 0.75 KW / 1 HP blower motor, die pressed door MS 2 mm thick PU painted with toughned glass, high quality rubber as door gasket for leak proof, 640 mm dia door opening along with air duct for minimum air delivery1890 ft3/Hr including Control Panel switch gear used with motor protection relays, single phasing preventer, reverse phasing, Auto timed, Auto reverse with indicators etc, starter and MCB of suitable rating for Electric incoming connection to the Machine and necessary foundation complete all as specified and as directed by Engineer in Charge.

Supply, installation, testing and commissioning of Flat work ironer (Chest Heated) Single Roller approx over all size 2850 mm x 570 mm x 1100 mm, eletric heated with air suspended ironing aluminium chest with digital control & auto digital temperature control (Without air compressor), Size of the roller dia 380 mm x length 2000 mm or as per OEM recommendation runs on self aligning ball bearing padded with galvanized Spring double layer polyster / normax padding, driven by 0.75 KW, 415 volts, 50 Hz motor with VFD drive for variable roller speed, electrical heated 18 KW, precision machined Aluminium chest with ground smooth and polished , perfect contact angle with roller, suspended by pneumatic cylinder, adjustable & uniform ironing pressure across the entire roll, chest moves automatically at the time of power failure or when machine stop including control Panel switch gear used with starter, VFD drive, protection relays, single phasing preventer, reverse phasing, Auto timed, Auto reverse with indicators etc. and MCB of suitable rating for Electric incoming connection and necessary foundation to the Machine complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of vacuum Steam Ironing Machine complete with vacuum finishing table, electric steam generator & steam iron, having approx dimensions of table top 1220 mm x 750 mm or as per OEM recommendation, main body formed out of steel sheets, powder coated painted, all components easily accessible, table top made up of M.S. sheet (powder coated) of minimum 1.5 mm thickness perforated flat top padded with high porosity & heat resistant silicon padding & final cover with heavy duty centifugal suction blower driven by independent blower motor of capacity not less than 0.75 KW activated by spring loaded full length foot pedal work in conjunction with study micro switch,fully automatic pressure and temparature control electric steam generator 3 KW rating of capacity of steam output not less than 03 Kg, having pressure vessel made of boiler quality steel construction, SS heavy duty electric heaters and having safety features like electric solenoid steam release safety valve, dry cutout, excessive steam pressure release etc including suitable electronic heated steam press - 1 Nos, having precision thermostatic control and heat proof backlite handle complete all as specified and as directed by Engineer-in-charge. [Note : Necessary foundation to the machine, ducting / piping /cabling work required from steam generator to vacuum steam ironing table shall be deemed to be included in the quoted rate]

Supply only dry linen trolley capacity 50 Kg, made up of S.S 304 body with stainless steel handles and revolving wheels, of size 40" W x 30"L x 34" H, fitted with 04 Nos of swiveling type 6" dia ball bearing wheels complete all as specified and as directed by Engineer in Charge.

Supply only wet linen trolley capacity 50 Kg, made up of S.S 304 body with stainless steel handles and revolving wheels, of size 40" W x 30"L x 34" H, fitted with 04 Nos of swiveling type 6" dia ball bearing wheels complete all as specified and as directed by Engineer in Charge.

Supply, installation, testing and commissioning of Air Compressor 3.0 HP Capacity with Air Delivery 360 LPM, fully automatic, complete with driving mechanism by 2.2 KW electric motor, three phase, 415 volts, 50 cycle, with 220 ltrs tank at suitable operating pressure as per OEM recommendation including control valves, piping, DOL starter, isolator etc including MS XPM protection guard for belt drive including Control Panel switch gear used with motor protection relays, single phasing preventer, reverse phasing, Auto timed, Auto reverse with indicators etc. starter and MCB of suitable rating for electric incoming connection and necessary foundation complete all as specified and as directed by Engineer in Charge. [Note for item Nos. 1 to 7 : (a) The contractor shall submit detailed technical specifications of mechanical laundry equipment for approval of GE before placing order (b) Quoted rate deemed to be inclusive of all necessary control cablesfrom equipment to main LT panel, piping,ducting, foundation etc, required as per OEM recommendations for full functinality of machinary (c) The quoted rate is deemed to be inclusive of periodical service visit by authorised service rep of OEM once in three months during entire defect liability period and FDR for retention amount @ 2% cost of the subject item for guarantee of 02 years from date of completion.

Suppy, testing and laying in trenches, fixed on walls, passing through pipes, jointing and testing of electric LT cables, XLPE insulated, PVC sheathed, galvanised steel strip or wire armoured electric power cables with stranded aluminium conductors 1100 Volts grade including taking out of old unserviceable cable complete all as specified and as directed by Engineer-in-Charge for the following size :- Note: (i) The rates shall be inclusive of Cable lugs at both ends of cable. (ii) Excavation earth, returning and filling and HDPE DWC protection pipe of suitable size GI clamping on wall (wherever required) shall deemed to be included in the quoted rate. (iii) Insulation Resistance value of cable shall be recorded before and after laying of cable. (iv) The rate for aluminium clamps for wall mounting shall be deemed to be included in the rate quoted.

3.5 Core, 120 Sqmm

4 Core, 16 Sqmm

Supply and laying in replacement of 50mm dia three layer (inner microbial, outer UV stabilized) ISI marked PP-R pipes SDR7.4 (PN-16) conforming to IS-15801 and PP-R plain fittings in trenches / wall / ceilings or laying in floors including fixing accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and laying in replacement of 25mm dia three layer (inner microbial, outer UV stabilized) ISI marked PP-R pipes SDR7.4 (PN-16) conforming to IS-15801 and PP-R plain fittings in trenches / wall / ceilings or laying in floors including fixing accessories complete all as specified and as directed by Engineer-in-Charge.

Supplying fixing and testing of PVC rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs (cylindrical vertical with closed top) ISI marked hoisted and fixed in position and dismantling old water storage tank and making necessary connection with pipelines complete all as specified and as directed by Engineer-in-Charge.

Taking down of old unserviceable mechanical laundry along with all connecting accessories and fittings and depositing to MES store yard complete all as specified and as directed by Engineer-in-Charge.

M/s Karbhagam Sales Agency

DHAKSHNA MOORTHY AND SON