1)SBC-TK-SPGR Section- Proposed construction of ROB at LC.No50 @KM:85/700- 800 42m composite Girder 2)Proposed construction of RUB at LC gate No.48 @kM 81/500-600 between Mallasandra and Gubbi stations in ADEN/YPR sub division 3)SBC-TK-SPGR Section-Proposed limited height subway at old LC43 (RUB N0.297 B At KM:73/000-100 near Bheemasandra - RCC box of size 1x5x2.25 by rolling/ launching method 4)YPR-SPGR Section-Proposed subway at old Shettyhalli gate KM 67/700-800 neat Shettyhalli- (Bridge No.308-D) RCC box of size 1x4x2.25 by rolling/launching method 5)Provision of Lifts at GBD Railway station for PF-1 & PF- 2&3 6)Provision of two escalators (down direction) at PF-1 & PF-2&3 of Kengeri railway station (PID: 14.01.53.25.3.50.008) 7)JTJ-SBCSection- Proposed Pedestrian subways to facilitate crossing of railway alignment by cattle, pedestrians and smaller vehicles in various locations as RCC Box of size 1x5mx2.65m (Barrel length = 18.36 mtrs) by Rolling/Launching method 8)SBC-SPGR Section- Proposed Pedestrian subways to facilitate crossing of railway alignment by cattle, pedestrians and smaller vehicles in various locations as RCC Box of size 1x5mx2.65m (Barrel length = 18.36 mtrs) by Rolling/Launching method (total 11 Nos) 9)YPR-YNK Section- Proposed pedestrain subway at Sahakara Nagara at Km 13/200-300 near NTI layout- RCC box of size 1x4x2.25 by rolling/launching method in ADEN/YPR sub-Division 10)Provision of DG sets at Running Rooms and crew rest rooms over SBC division 11)Improvement of illumination in tunnel (600m length) near TASA at KM 42/750 - 43/350 12)SBC-SPGR Section - Proposed extension of FOB at NDV station to accommodate Raod-1A with stair & lift 13)Implementation of Investment Grade Energy Audit (IGEA) recommendations at 30 locations over SBC division

locations over SBC division

Implementation of Investment Grade Energy Audit (IGEA) recommendations at 30 locations over

S No. Item Description of Item Unit Qty Rate Amount

1 01 Design, supply, installation , testing and Numbers 167.00 11865.00 1981455.00

commissioning of dual sensor driven

programmable Air conditioner energy saver PLC

suitable for split ACs upto 2TR capacity with all

necessary accessories like sensors , connectors,

display unit, remote etc., required at site

complete. The device should measure and

display room & coil temperatures along with a

remote to change set temperature. LED display

for compressor ON/OFF status and indication

whether set room temperature is achieved to be

available. The device should have bypass mode

to compare and measure savings easily.

2 02 Supply and provision of infrared motion sensor Numbers 50.00 1197.00 59850.00

360 degree detection, range upto 12m distance

, IP 20 ,capacity upto 300W with all necessary

3 03 Supply and Wiring for circuit/ sub main wiring RM 1000.00 319.00 319000.00

alongwith earth wire with 2x2.5Sq.mm+

1x2.5Sq.mm earth wire of FRLS PVC insulated

copper conductor , single core cable in

surface/recessed medium class PVC

conduit/casing and capping including supply and

laying of PVC conduit/casing and capping with

all accessories like round block, ceiling rose, as

per specification. ( PVC conduit/casing and

capping to be used as per site condition.)

BANGALORE DIVISION-ELECTRICAL/SOUTH WESTERN RLY

4 04 Supply , installation, testing & commissioning of Numbers 2.00 30250.00 60500.00

VFD unit along with temperature sensor

transmitter unit , necessary wiring & fixtures as

per site condition to control the speed of Cooling

tower (CT) fan of 4.4kW capacity based on the

sump temperature. A timer also to be provided

to switch off the CT fan in case of running

continuously for a particular amount of time.

The chiller plant available is of M/s Blue star

make, the VFD should be compatible with the

existing system.

5 05 Design,Supply, installation and commissioning Numbers 4.00 13814.00 55256.00

of out door IP54 Timer Distribution panel board

made out of CRCA steel sheetsuitable to operate

on AC 3 phase supply comprising of

suitableAstronomical programmable timer

switch , Triple pole contactor of 32A rating , FP

MCB of 40A rating including all

necessaryinternal wiring for automatic ON/OFF

of the light fittings alongwith provision of

manual override option ,proper

lockingarrangement for panel , all bolts, clamps,

nuts,stand, CC foundation etc., for fixing on the

wall or on the floor/ground asper site condition

including cost of all necessary materials,labour

charges complete as per specification.

6 06 Design, supply and installation of out door type Numbers 1.00 6000.00 6000.00

optical sensor based lighting control unit with all

necessary accessories like optical sensors,

contactors ,enclosure, wiring etc as required at

site condition complete for switching ON & OFF

of lighting circuit of upto 3kW load based on the

set ambient light levels.