Supply of electrical material and labour work at C.H.C. Salone, Raebareli (Main Building) (Balance work)

Amount

Labour Work

Labour Charges for Laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.50 sqmm x 3½ core.

Labour Charges for fixing of brass nickle plated compression gland for PVC insulted & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.50 sq.mm x 3½ core.

Labour Charges for fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 25 sq.mm.

Labour Charges for Laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect.

Labour Charges for burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 2000 mm, Outer pipe 50 mm, inner pipe 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip will be extra) Complete in all respect.

Labour Charges for fixing of 6 Amp. To 32 Amp. SPMCB (10 KA) Cat-B

Labour Charges for fixing of 63 Amp. DP MCB (10 KA) Cat.-B

Labour Charges for fixing of surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat-B

Labour Charges for fixing of surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Cat-B

Labour Charges for Installation, Testing & commisioning of 5 KW Solar Power System off gride type with MNRE Approved following Item.(a) Solar Module 5.20 KW Exide make.(b) Solar PCU 5.2 KVA Exide make.(c) Suitable structure for fixing of Solar Module.(d) Battery Bank of 8 Nos. 150 AH Exide tubelar with 5 year Warranty with rack.(e) Electrical wiring & cabling of required size & length for Solar Power Plant System.(f) Any Civil & Mechanical Work/required on site.

Materials

Supply of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade with sand, bricks burn & M.S. clamp. Etc. Size:- 50 sqmm x 3½ core.

Supply of brass nickle plated compression gland for PVC insulted & armoured served sheathed etc. Size:- 50 sq.mm x 3½ core.

Supply of plain or pin type aluminium tin plated cable socket (lug) to the cable leads. 25 sq.mm.

Supply of 25 mm x 3 mm G.I. Strip.

Supply of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer pipe 50 mm, inner pipe 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip will be extra) Complete in all respect.

Supply of 6 Amp. To 32 Amp. SPMCB (10 KA) Cat-B

Supply of 63 Amp. DP MCB (10 KA) Cat.-B

Supply of surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB.

Supply of surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Cat-B

Supply Testing & commisioning of Solar Power System off gride type with MNRE Approved following Item.(a) Solar Module 5.20 KW Exide make. (b) Solar PCU 5.2 KVA Exide make.(c) Suitable structure for fixing of Solar Module.(d) Battery Bank of 8 Nos. 150 AH Exide tubular with 5 year Warranty with rack.(e) Electrical wiring & cabling of required size & length for Solar Power Plant System.(f) Any Civil & Mechanical Work/required on site.

SANJAY ELECTRIC COMPANY