ADDN ALTN TO CIVIL ADMIN BUILDING AND REPAIRS REPLACEMENT OF FEEDER PILLAR BOX SMC BOXES, LT POLES FLOOD LIGHTS, STREET LIGHTS, POST TOP LIGHTS, TIMER PANELS, CONNECTED CABLE WORKS INCL REPAIR MAINT OF VERTICAL CAROUSAL ALONGWITH PROVN OF WALL MOU

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor/paving n.exc 15 cm below or above ground level complete all as specified and directed.

M & L for Moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for PCC 1:4:8 type D2 100mm thick using 40mm graded stone aggregate as in sub base to floor etc., complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick(square/rectngular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles shades and colour including screed bed or bedding layer of mortar 15mm thick in CM 1:4 for receiving of floor tiles complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over screed bed of 15mm thick in CM 1:4 etc complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles shades and colour and including 10mm thick rendering in CM 1:4 etc complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm in Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finishing the exposed surfaces fair and even complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed.

M&L for Preparation of old plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Taking down chowkats or frame exc. 1.50 sqm but not exc 4.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and as directed.

S&F anodized aluminium frame of size 50mm x 25mm for doors, windows, and ventilators with one or more rebates, including necessary joining cleats for proper fixing. The frame shall include a 12mm wide channel for louver glass and be anodized with a coating not less than 15 microns. All sections shall have a minimum thickness of 2mm, ensuring durability and finish complete all as specified and directed

Supplying and fixing anodized aluminium door and window shutters made from aluminium sections weighing 0.55 kg/m, including necessary joining cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading, anodized aluminium handles (2 Nos per door), anodized aluminium hinges, screws, and all other required fittings and accessories for complete installation. The anodizing shall be not less than 15 microns thick complete all as specified and directed.

S&F Aluminium Mortice lock, 4 levers vertical type size 100mm complete all as specified and directed.

S&F aluminium (Die cast) body door closer hydraulically regulated designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg & fixed complete all as specified & directed.

S&F for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed

M & L in 12 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws etc complete all as specified and directed.

M & L for Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed.

Taking down chowkhats or frames with shutters and removing to store shutters of any description n.exc 1.5 sq. m each complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction

S&F 4mm thick sheet glass squares or rectangular in shape of each pane not exc 0.5 sqm complete all as specified and directed.

Supply and Fix Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with fixed with stainless steel wire staples fixed to frames with and including wooden beadings etc., complete all as specified and as directed.

Taking up or down steel tubing and connections, including removal to store etc all as directed for 15mm bore complete all as specified and as directed.

All as per Item No. 24.00 above but for 20mm bore

S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

All as per item No. 26.00 above but for 20mm bore

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply and fix in repairs PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., including taking down the exiting one complete all as specified and as directed.

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, PTMT waste coupling 32mm, and PVC 32mm dia waste pipe including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed

S&F in repairs Vitreous China urinals, half stall type with PVC waste/ flush pipes, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe etc complete all as specified and directed

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in repair tubular towel rail alumunium anodised , 20mm dia, D type 60 cm long between flanges all as specified and directed

S&F in repairs Soap dish vitreous china white of size 160X160X90mm fixed to wall all as specified and directed

Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, 'ISI' marked, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling of old water tank of any description, complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs 15 mm dia Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified amd directed

S&F in repairs 15mm dia stop valve/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for PVC/iron pipes or for unions and fixed of,complete all as specified and directed.

S&F 15mm in repairs dia Pillar taps cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

M&L for Complete Removal of existing water proofing treatment over roof including PCC of any thickness description in any position including cleaning the surfaces with wire brushing, watering and removing debris up to 1500 mtr distance etc complete all as specified and directed.

M &L for PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in roof levelling course with integral water proofing compound as per manufacturers instructions all as specified and directed. Note:- WPC shall be measured & paid separately.

M&L for Rendering in cment mortar 10mm thick in of 1:3 ratio on concrete surfaces of roof finished even and smooth without using extra cement to recive water proofing membarane mixed with integral water proofing compound as per manufactures all as specified and directed. Note:- WPC shall be measured & paid separately.

Supply only integral water proofing liquid complete all as specified and directed. (@200ml per bag of cement)

M&L for Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre all as specified and directed.

M&L for prepartion of the plastered surfaces by thoroughly removing all loose particles, dirt/ dust particles and applying a uniform coat of hot blown bitumen of grade VG-10 @ 1.20 kg/Sqm confirming to IS 702 over a coat of water based bituminous primer @ 0.40 ltr/ sqm and laying APP based polymeric membrane as per IS 16540-2017/ IS 16532-2017 with overlap of 100mm minimum weighing 3.6 kg/ sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/ sqm) by forced application and finally finsihed the memberance surface by applying a coat of solar refelective aluminium paint @ 0.1 ltr / Sqm complete all as per manufacturer's instructions as specified and as directed.

M & L for point wiring with 1.5 Sqmm (nominal area) PVC insulated,FRLSH unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 25mm dia and its accessories fixing on wall/ceiling/trusses steel structure with suitable clamps , screws etc including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified and directed for :-

One wall mounted / exhaust fan point controlled by one switch

M&L ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F switch piano, flush type single pole, one way 5 Amps complete all as specified and directed.

Supply and fix wall mounted fan of 450mm sweep 230 V, 50 Hz, blades PVC type, including clamps, nuts and bolts etc. all as specified and directed.

Supply and fix exhaust fan, steel body, AC single phase, 230V of size 300mm sweep with blades, and frame and louvers with making hole for fixing of Exhaust fan suitable size for fixing of exhaust fan with necessary civil work, alteration in exist ventilation window of iron / aluminium frame for fixing of fan as per site requirement complete make good the wall / ventilation window match with exist complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out any type of soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Removing excavated material(soil)not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.

Returning filling in soil including spreading leveling watering well ramming in layers not exceeding 25 cm each all as specified and as directed.

Laying in trenches fine sieved excavated dry soil including spreading/leveling, cushioning for underground cables all as specified and as directed.

Supply and laying of common burnt clay building bricks, sub class B size for cable protection all as specified and as directed.

Material and labour for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, 3.5/4 in replacement of the following sizes cross-sectionl area including taking down of old unserviceable cable/OH line ACSR conductor of any type complete all as specified and as directed:- (Note: Earth work and connected items will be measured and paid separately under respective items of schedule)

10 sq mm 2 core

16 sq mm 4 core

25 sq mm 3.5/4 core

35 sq mm 3.5 Core

50 sq mm 3.5 Core

70 sq mm 3.5 Core

95 sq mm 3.5 Core

120 sq mm 3.5 Core

185 sq mm 3.5 Core

Supply ,Fabricate, install, connect, test and commissioning Busbar chamber, powder coated, outdoor weather proof type, compartmentalised fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars including taking down the old busbar chamber and demolition of old plain cement concrete complete all as specified and directed , comprising of the followings:- (i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 400 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps-03 Nos for RYB phases on incoming side. (ii) MCCB fixed thermal magnetic release type of capacity 200 amps, 4 pole, 36 kA.- 1 No.

M&L for fixing in replacement of Aluminum Bus Bar having current rating 400 Amp duly insulated with colour coding RYB and Black including making holes on the bus bar for making necessary connections all as specified and as directed.

M&L for fixing in replacement of Aluminum Bus Bar having current rating 600 Amp duly insulated with colour coding RYB and Black including making holes on the bus bar for making necessary connections all as specified and as directed.

M&L for replacement of Angle Iron for fixing Panel body shall be fixed on iron angle frame of size 40x40x5mm 40 cm grouted in 1:2:4 type 1 PCC 20 mm graded and 40 cm above the ground level duly painted with two coats of synthetic enamelled black paint over a coat of red oxide primer all as specified and directed

Supply & fixing in replacement Ammeter meter 100x100mm 0-100 amps of CT ratio 100/5, Digital type volts includind all electrical connection complete and specified .

Supply & fixing in replacement Voltmeter meter 100x100mm 0-500 Volts, DIgital type volts in cludind all electrical connection complete and specified .Make AE / Havell,s/ Equivalent as approved by GE

M&L for steel tubular swaged poles complete with cast iron base plate final taper plug bolts, nuts & screw all as specified and directed Type 410 SP 31 (9 Mtr long) with two coat of aluminium paint over a coat of red oxide primer in full length of the pole with black and yellow strip up to 1.5 mtr over PCC coping alternatively including numbering the pole and necessary excavation incl Removal of UNSV PCC/Steel pole etc complete all as specified and directed.(Note: Excavation, demolition of concrete, PCC for foundation, coping and connected items shall be measured and paid separately under relevant items)

Demolition of cement concrete of any description and in any position complete all as specified and directed.

M&L for PCC (1:4:8) type D2,( using 40 mm graded aggregate) as in foundations, filling and mass concrete Complete all as specified and directed.

M&L for PCC (1:3:6) type C1, (using 20 mm graded aggregate) as in foundations, for coping, filling and mass concrete with cement plastering finishing all as specified and directed.

Material and labour for GI tubing light grade for cable protection 50 mm dia laid in trenches in road crossing or fixed to wall/Pole of following sizes including taking down old unserviceable one complete all as specified and as directed.

Supply and Fixing of LED flood light fitting,230 V,AC, 120 W, LED, outdoor type,heat resistance toughened glass with frame IP 65/ 66 protection with driver, complete fixed on existing / New bracket and making connections including taking down the old one complete all as specified and as directed .

Supply and Fixing of LED flood light fitting,230 V,AC, 200 W, LED, outdoor type, for high mast light poles up to 12/15 mtrs height, heat resistance toughened glass with frame IP 65/ 66 protection with driver, complete fixing arrangements on existing system and making connections including taking down the old one complete all as specified and as directed .

Supply and Fixing of LED street light fitting,230 V,AC, 45 W, LED, outdoor type,heat resistance toughened glass with frame IP 65/ 66 protection with driver, complete fixed on existing / New bracket and making connections including taking down the old one complete all as specified and as directed .

Supply and Fixing of LED street light fitting,230 V,AC, 60 W, LED, outdoor type,heat resistance toughened glass with frame IP 65/ 66 protection with driver, complete fixed on existing / New bracket and making connections including taking down the old one complete all as specified and as directed .

Material and labour for 1100 volts grade heavy duty cable PVC insulated , PVC sheathed,fire resistant, round ,copper conductor, 3 core industrial cable of size 1.50 sqmm including taking down the old one complete all as specified and as directed.

All as per Item No.87.00 above but size of 2.50 sqmm including taking down the old one complete all as specified and as directed.

M&L for street light bracket suitable for street/security light fittings upto 1.5 RM make out of GI pipe of light grade up to 32 mm dia proper shaped, bended, threaded and drilling holes for wire entry and MS clamp of suitable size in proper shape and designed including taking down unsv complete all as directed and specified .

S&F of LED post top lantern,230 V,AC, 40 W, LED, outdoor type,360 degree indirect light,CCT not less 6000K high pressure die cast aluminium housing ,heat resistance toughened glass with frame IP 65 protection, uniform light distribution on each LED with driver,lamp, bracket complete fixed on existing / New bracket and making connections including taking down the old one complete all as specified and as directed

S&F for LT timer panel made out of 3mm thick CRCA sheet out door kiosk type with sloping canopy on the top finished with epoxy powder coated siemens grey texture finish mounted on 40x40x6 mm angle iron frame and suitable for mounting following items incl taking down unsv complete all as specified and directed. (a) Incoming 100 amps 4 pole 25 Ka MCCB Thermal magnetic release- 01 No (b) Out going - 60 Amps 3 pole power contactor - 01 No (c) Light sensing timer Photosensitive device type 220-240 V AC type, rating 10 Amps(Max) - 01 No (d) Set of (04 Nos) 200 Amps rated Aluminium bus bar mounted on suitable insulators insulated with PVC sleaves and coloured with (Red, Yellow, Blue and Black) CTR and internal wiring with suitable size of PVC insulated copper wire (e) Set of LED Phase Indication lamp

M&L for 60 Amps 3 pole power contactor incl taking down unsv complete all as specified and directed.

M&L for light sensing timer Photosensitive device type 220-240 V AC type, rating 10 Amps(Max) - 01 No complete all as specified and directed.

S&F in replacement of High Mast Head is made with optimum grade raw material suitable to be fitted in poles for making it extremely durable to withstand adverse weather condition rust resistance complete suitable for up to 12/15 mtr hight mast lights complete all as specified and directed.

S&F in replacement of High Mast Lighting Ring is processed with high quality material which makes it high in strength and easy to install at poles head, Resistant to rust,Optimum quality Withstand adverse weather condition suitable for up to 12/15 mtr hight mast lights complete all as specified and directed.

M&F for repairs, servicing for Electric Winches High Mast light 12/15 mtrs height ,electric winches, rope length up to 25 mtrs, Independent drives for each drum which allow rope equalising at any time by simply removing the splitter gearbox from the two input shafts, doing the necessary adjustment, replacing the splitter gearbox and continuing the operation complete all as specified and directed.

M&L in replacement of stainless steel wire rope for High mast light poles, rope dia of 6mm, size of 7/19 incl suitable D clamps, shackles, nut and bolts complete all as specified and directed

Material and Labour for MCCB 63 amps ,4 pole 415 volts ,3 phase ,50 Hz AC, 16 KA breaking capacity. The MCCBs shall have spreader links and barriers as standard feature of manufacturer including taking down old unserviceable one complete all as specified and as directed.

All as per item No. 98.00 but of capacity 100 amps, 25 Ka including taking down old unserviceable one complete all as specified and as directed.

All as per item No. 98.00 but of capacity 160 amps, 36 Ka including taking down old unserviceable one complete all as specified and as directed.

All as per item No. 98.00 but of capacity 200 amps, 36 Ka including taking down old unserviceable one complete all as specified and as directed.

All as per item No. 98.00 but of capacity 250 amps, 36 ka including taking down old unserviceable one complete all as specified and as directed.

All as per item No. 98.00 but of capacity 400 amps, 26 ka including taking down old unserviceable one complete all as specified and as directed.

M&L for open enclosure type, on load change over siwtch 200 Amps ,4 pole 415 volts ,3 phase ,50 Hz AC suitable for fixing in Panels incl taking down old unsv complete all as specified and as directed.

Supply and Fixing MCB,240V,10KA,'B' curve,single pole,current carrying capacity 6 Amps, suitable for fixing in SMC box for control street/flood lights and making connections including taking down the old one complete all as specified and as directed .

Carrying out servicing and overhauling of Lean Lift(Vertical Storage & Retrieval System) HSN Code : 94032090 by drawing out the draw-out trays of the Lean Lift, carrying out complete cleaning with clean cloth & cleaning agent, lubrication of the mechanism & greasing with high temperature molly grease, testing for smoother ON/OFF operation, carrying out relay calibration of Control Panel, reliable safe and efficient operating condition periodically examining, lubricating and adjusting the equipments and carry out planned maintenance quaterly in systematic and controlled manner using techniques and expertise including submission of service & test reports. For payment purpose each qtr considered as one job complete all as specified and directed. Notes :- (i) The comprehensive maintenance shall be done through authorised OEM i.e. of M/s Hanel (ii) The contractor will have to submit MOU from authorised dealer within fifteen days from date of Acceptance of tender. (iii) The quoted rate deemed to be included for repair/replacement of minor spare parts. The cost of above materials are deemed to be included in the rates quoted by the contractor. (iv) Contractor along with OEM rep shall come to the site of breakdown within one day of notification of breakdown. In case the contractor along with OEM rep shall not come to the site of breakdown and start attending breakdown within one day, a penalty of Rs 5000 per day shall be imposed over contractor and shall be deduct from his dues. (v) The authorised OEM give telephonic support, as and when required for smooth and effiecient functioning of the equipment.

Supply and replacement of following items of HANEL make Lean Lift as stated in here in before above including taking down old unserviceable one complete all as specified and as directed.

Guide Roller with bearing complete system

Proximith switch B 10 complete system

Proximith switch B 12 complete system

Emergency stop system for connection to safety control system MP 12D/N complete system

PSK Enterprises (BID ID -3164454)

NAVEEN ENTERPRIESES (BID ID -3158748)