REPAIR / MAINT OF AREA DRAINAGE, FENCING, COMPOUND WALL, HARD STANDING AND OTHER MISC BR WKS UNDER AGE BR I AT GE JHANSI

Amount

Dismantling posts or struts (wood or RCC) any section including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismantling of fencing wire mesh, any type, complete all as specified and directed.

Excavation in post hole (similar hole) in any type of soil, each post hole not exceeding 0.5 Cum, getting out, returning filling in and ramming, complete all as specifide and directed.

M&L for mild steel angle and flat Iron for posts and struts and straining bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing fencing etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165, complete all as specifide and directed.

M&L for coloured PVC covered galvanised chain link fencing, of size 50 x 50mm and dia of wire 2.5 mm and 1.5 mm PVC covered (overall dia of wire 4mm), fixed to any type of standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for galvanised iron, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75.0 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for MS screwe bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 5.0cm but not exc 10.0 cm long and dia of neck 10.0 - 15.0mm, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F of 1.25 mm thick, mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc, as required, complete all as specified and directed.

S&F of mild steel framed work as in door, gates or similar items of angle or other section as required with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering; doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with and incl necessary machine works i.e. cutting, welding, bending, grinding etc confirming to Fe-410-W, (Gde E-250) Quality ‘B’, complete all as specified and directed.

Dismantling of asbestos cement (corrugated / semi corrugated etc) sheet as in roof covering, complete all specified and directed.

Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof / ceiling, complete all as specified and directed.

M&L for mild steel work as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) including distance pieces, cleats etc with and incl all kind of machine works i.e. cutting, welding, bending, grinding etc, confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering / cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

Refixing only old AC sheet fixed with L-type or screws J-type or cranked hook bolts all as specified and directed

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

Taking down oldunserviceable ceiling boars with frame, complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of main T runner 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof / Slab incl wall/perimeter runner/channel of 15 mm size with interlocking arrangement, as required, for framing grid of suitable module size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc / V-Board / Everest

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry and pointed in CM, complete all as specified and directed.

M&L 50 mm thick cement concrete type C2, 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing, complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.

M&L for factory made PU coated, chequered cement concrete tiles of any colour 30cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.

Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster / lime cova 80 to 100mm thick mud phuska/cement concrete/lime cova etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding levelling etc and roof kerbs, complete all as directed.

M&L for 10 mm thick rendering in CM (1:4) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface when concrete is green, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100mm microne HMHDPE outer flim 20 micron each having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions complete all as specified and as directed by Engineer-in-Charge with following course of description below :- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (c) 3rd course ie. laying of APP Based modified membrane described herein before with 100mm overlap in longitudinal direction and 150mm in transverse direction, all joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (d) Forth course of bounding materialusing blown grade bitumen 85/25 conforming to IS-702 @ 1.20 Kg Per Sqm and over spread course sand for making roughening the surface to receive the next layer treatment.

M&L for applying one coat of bituminious aluminium paint @ 0.20 Kg Per Sqm over APP membrane, complete all as specified and directed.

M&L for factory made chequered cement concrete tiles of size 20cm x 20cm x 15 to 20 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6 with water proofing compound, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc, removing serviceable bricks to store and rubbish off the premises, complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6, but except bricks, complete all as specified and directed.

M&L for half brick thick wall with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.

M&L for precast cement concrete louvres and jallies, made of PCC, 1:2:4, type B0 (12.5 mm graded aggregate), 40 mm thick (measured solid), including all mouldings and frame set in CM 1:4, complete all as specified and directed.

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) with water proofing compound, on fair/other than fair faces of brick work finished even and fair, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for 15 mm thick rendering in CM (1:6) on fair / other than fair faces of brick work finished even and fair, complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3, finished even and smooth without using extra cement, complete all as directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash on new plastered wall surface, complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preparation of new plastered surface and applying three coats of white wash on new plastered ceilings surface, complete all as specified and as directed.

M&L for complete removal of existing treatment from old treated surfaces of wall and applying two coat of cement based paint over and incl one coat of exterior grade cement based prime on external surface of wall, complete all as directed and specified.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated external surfaces of wall of and applying three coat of white wash (lime), complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of white wash (lime) on walls surface, complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement based paint on walls surface, complete all as specified and directed.

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.

Demolition of cement concrete incl terrazzo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed.

M&L 25 mm thick plain cement concrete type B0 1:2:4 (using 12.5 mm graded stone agg) as in levelling course, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

M&L for machine cut Kota stone slab flooring 18-20 mm thick and laid over and incl 15mm thick screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone as per local trade practice, complete all as specified and directed.

All as per item no 51 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4.

M&L 50 mm thick plain cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path, finished even and smooth (without using extra cement), laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

Excavating in trenches, not exc 1.5 m wide for foundation exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard / dense soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, wateringand well ramming in layers not exc 25 cm in hard / dense soil, complete all as specified and as directed.

Removing excavated soil not exc. 50m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed.

M&L for cement concrete, in foundations, filling and mass concrete, Type D2 1:4:8 (40 mm graded aggregate), complete all as specified and as directed.

M&L 75 mm thick cement concrete type C1 1:3:6 (using 40 mm graded stone agg) as in hard standing laid in panels, not more than 1.5 mtr in length/width, laid to slope 1:30 incl forming joints using 3mm thick and 35mm wide glass dividing strips, complete all as specified and as directed. Note : The glass dividing strips will be measured and paid separately under respective item only.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings, bond stones, bed plates for hold fast, benching, surface channel, suacer drain and the like incl weathering, slightly rounded or chamfered angles and throating etc, complete all as specified and directed.

Supply only Glass dividing strips 3mm thick and 38mm wide fixed in floor complete all as directed

Taking down steel tubing with and incl connections, of 15 mm dia bore, complete all specified and directed.

Taking down steel tubing with and incl connections, of 20 mm dia bore, complete all specified and directed.

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

Taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as directed.

S&F 110 mm bore PVC (SWR) branch piece (Single Y) equal or unequal, complete all as directed.

S&F 110 mm bore PVC (SWR) branch piece (double Y) equal or unequal, complete all as directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

Demolition of RCC not exc 15cm thickness roof, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work, complete all as specified and directed.

M&L for RCC, type B2 1:1.5:3 (20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs and lintels/beam, chajja landing and similar work not exc 200mm thick, complete all as specified and directed.

M&L for factory made RCC drain cover, 50 mm thick, made of M25 or higher Grade with 8 mm dia tor steel bar at 100 mm c/c, steel rims to prevent damage to the edges, 02 nos mild steel hooks, without hole, concrete by vibro compression process, medium duty, confirming to IS-12592, duly fixed on cable duct / drain including demolishing of old damaged cover, complete as directed.

S GOURAV PRAKASH ENTERPRISES

M/s Jagdish Chandra Arora

M/S AADI TRADERS

HARNAM SINGH ANIL SINGH

M/S Kesav Dev Agarwal

A K ENTERPRISES

Dubey Construction Company

M/s P L Dixit