Special repair and maintenance of roads at Ind. Area Amb, Distt. Una (HP).

Amount

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead, dressing of sides and bottom and backfilling in trenches with excavated suitable material with in all leads and lifts.

Providing and Laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 1:5:10 (1 cement : 5 Sand :10 crushed graded stone aggregate 40mm nominal size) including cost of formwork & carriage of material with in all lead and lift.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 1:2:4 (1 cement:2 Sand:4 crushed graded stone aggregate 20mm nominal size) and curing complete including Cost of formwork & carriage of material with in all lead and lift.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 1:1.5:3 (1 cement:1.5 Sand:3 crushed graded stone aggregate 20mm nominal size) and curing complete including Cost of formwork & carriage of material with in all lead and lift.

Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical/ HPPWD specification Clauses 1002, 1005, 1010 & 1202 including carriage of material with in all lead and lift.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including carriage of material with in all lead and lift.

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. including formwork & carriage of material with in all lead and lift.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects including carriage of material with in all lead and lift.

Providing steel R.S.Js/built-up steel sections including cutting, welding/rivetting, hoisting, fixing in position for composite girders with shear connectors complete with painting as per drawing and technical specifications Clause 1205.6 including carriage of material with in all lead and lift.

Dressing the ground including cutting and filling upto 15 cm including carriage of material with in all lead and lift.

Providing and fixing 3m-290 series road studs (Cat eye ) with double molded shank made of polycarbonate and ABS Molded body and reflected panels with micro prismatic lens capable of providing total internal reflection of the right entering the lens face and shell support a load of 16000 kg insizes of 90x110x17 mm. further for durable uses the studs are constructed using flexible and UV Protected material provided with suitable epoxy for fixing to roads including carriage with in all leads and lifts complete including entire satisfaction of engineer in charge (as per ASPM Standard) including carriage of material with in all lead and lift.

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250 gm per Sqm. And Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35. the finished surface to be leveled uniform and free from streaks and holes including carriage of material with in all leads and lifts.

Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm ISI Marked as per drawings and Technical Specification Clause 1504 including carriage of material with in all lead and lift.

Demolition below G.L. upto any depth and disposal of unserviceable materials within any lead. Un-reinforecd cement concrete including carriage of material with in all lead and lift.

Desludging of drains and culverts i/c stacking of serviceable materials and disposal of unserviceable materials outside periphery of Industrial Area including carriage of material with in all lead and lift.

Jaswal Constructions

Sandeep Kumar Dhiman