Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST QUOTED BIDDER | |
| 2 | L2₹9.2 L+₹4,606.10 (0.50%)Rejected-Finance 39 40 DASHMESH MARKET CIVIL GURUDWARA LINE PORT BLAIR 744 101 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | L2 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 3 | L3₹9.7 L+₹50,038 (5.44%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 4 | L4₹10.0 L+₹77,351 (8.40%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
20 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SECUNDERABAD
CWE AF SECUNDERABAD
ADDN/ALTN TO FOUR WASHROOMS AT CAW AREA UNDER GE (AF) HAKIMPET
2024_MES_643499_1
84744/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF HAKIMPET
As per NIT
9 documents required · 9 mandatory
₹500
GE AF HAKIMPET
₹20,000
Yes
28 Mar 2024
21 Feb 2024
22 Mar 2024
21 Feb 2024
20 Mar 2024
6 Mar 2024
21 Feb 2024 - 5 Mar 2024
Amount
SCHEDULE 'A' PART -I (B/R PORTION) :- Dismantling of wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and rubbish of the premises complete all as specified and as directed.
Demolition of plain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L for 25 mm thick Plain Cement concrete type B-1,1:2:4 mix (using 20mm graded aggregate) complete all as specified and as directed.
M&L for 15 mmm thick screed bed or bedding layer in CM 1:4 as in base to floor finish complete all as specified and as directed.
M&L for coloured non skid ceramic tiles 300X300X7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in backing coat for wall tiling as in skirting/dado complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350 x 250mm x 7mm or 450 X350X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded complete all as specified and as directed.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for 15 mm thick plastering in CM 1:6 on brick masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement is to be finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured seperately under appropriate item.
M&L for preparing new plastered surface of wall and applying 3mm thick putty finish to obtain smooth finish wall surface and applying two coat of distemper over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparing new plastered surface of wall surface and applying two coat of cement based paint a coat of alkali resistant primer complete all as specified and as directed.
M&L for complete removal of existing treatment of wall and applying 3mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.
M&L for complete removal of existing treatment of ceiling and applying 3mm thick putty finish to obtain smooth finish ceiling surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.
M&L for complete removal of existing treatment on walls and applying two coat of cement based paint over a coat of primer complete all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore complete all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore complete all as specified and as directed.
Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
All same as per item above but 25 mm bore complete all as specified and as directed.
S&F Brass elbow for 20mm CPVC connection complete all as specified and as directed.
S&F Brass elbow for 25mm CPVC connection complete all as specified and as directed.
S&F Brass Tee for 20mm CPVC connection complete all as specified and as directed.
S&F Brass Tee for 25mm CPVC connection complete all as specified and as directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
Demolition and breaking up of AC/PVC drain pipes 100 mm dia set in CM complete all as specified and as directed.
Demolition and breaking up of AC/PVC drain pipes 75 mm dia set in CM complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F 150 X150 mm Salt-glazed stone ware gully traps, square, or round mouthed, type 'P' complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends with access door any radiuis complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pedestral pan white/ coloured, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.
S & F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe), PVC Connection pipe 15mm bore, 450mm long with PTMT nuts, Push tap of 15mm size any colour high pressure of PTMT screwed for iron pipe and fixed (Minimum weight 15mm-47gms/20mm-75gms), Urinal Spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and as directed.
S&F counter sunk wash basin white. Make : Jaquar CAT Nos. Under Counter Basin with fixing Accessories size: 605x410x200 mm shape - Rectangular
S& F 15 mm bore pillar cock complete all as specified and as directed. Make : Jaquar CAT No. ORP10001 PM
S & F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."
S & F Chromium plated two way bib cock with flanges complete all as specified and as directed. Make: Jaguar Cat No DRC-CHR-37041
M&L for chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S & F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed
S&F soap dispenser complete all as specified and as directed. Make : Jaquar, CAT No. SDR-WHT-DJ0010FPUSH Button Soap Dispenser
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F cornner glass shelf of size 9"*9" shelf and front,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and as directed. Make: Jaquor : Cat No. ACN 1173
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
Taking down chowkats with shutter ( without taking off shutters from the frame) n.exc 1.5 Sqm each incl bathroom doors and ventilators complete all as specified and as directed.
M&L for Aluminium frame for partitions, ventilators, doors with one or more rebates including joining cleat for fixing etc. including Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and as directed.
S&F Sheet glass, ordinary quality 4 mm thick frosted and glazing fixed with rubber to aluminium frame in square/rectangle n exc 0.5 sq. m in each pane complete all as specified and as directed.
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & fixed with screws complete all as specified and as directed.
S&F door closer hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.
M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
S & F in repairs Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.
S & F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as specified and as directed.
S&F 100 mm long MS butt hinges, medium weight cold rolled complete all as specified and as directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F 150 mm long extruided aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
M&L Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid 8 mm thick complete all as specified and as directed.
Removing building materials etc upto a distance of 6 Km including loading, unloading at the destination complete all as specified and as directed.
Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.
M& L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.
M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.
Dismantling Battens for tiles, shingles etc, of any size including tilting fillets complete all as specified and as directed.
M&L Plain fillets. square, rectangular or triangular in section, clean sawn, 2nd class hardwood exc 13 & n exc 25 Sqcm secured with nails or brads complete all as specified and as directed.
SCHEDULE 'A' PART -II (E/M PORTION) Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge.
Taking down unserviceable MCB DBs, Metal clad DBs along with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge.
Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etc,.
Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:-
(a) One light point controlled by one one way switch .
(b) One Exhaust fan point controlled by one one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the Independent board.
M&L for Modular switch 6A, 1 way. Make :Anchor/ Havells/ Legrand/ Crabtree
M&L for Socket outlet 6A modular. Make :Anchor/ Havells/ Legrand/ Crabtree
S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body. Make :Anchor/ Havells/ Legrand/ Crabtree
M&L for Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings. Make :Anchor/ Havells/ Legrand/ Crabtree
S & F in repairs, wall mounted 10W, 6K,LED light fitting 2' with all in one fixture extruded aluminium heat sink provided for efficient heat dissipation & intergrated electronic driver, internally pre-wired including two Nos PVC blocks and connecting up with twin core twisted flexible copper conductor cable of suitable size upto ceiling rose including taking down old one. all as specified and directed by Engineer - in - Charge Make- Havells, Model: LUMILINEBS10WLED865SPCWH or equivalent in Philips/CG
S & F in repairs, wall mounted 22W, 6K,LED light fitting 4' ultra slim with extruded aluminium, heat sink provided for efficient heat dissipation & intergrated electronic driver, internally pre-wired including two Nos PVC blocks and connecting up with twin core twisted flexible copper conductor cable of suitable size upto ceiling rose including taking down old one. all as specified and directed by Engineer - in - Charge Make- Havells, Model: LUMILINEBS22WLED865SPCWH or equivalent in Philips/CG
Supply and fixing LED luminaire 2'x2', 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for False roof ceiling as required including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by the Engr-in-charge. Make : Havells/ Phillips / CG.
M&L for Taking down ceiling/wall mounted fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and as directed.
Sub main wiring complete with two runs of 4.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 4.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.
All as per item No. 13 above but with 2x1.5 Sqmm + 1x1.5 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 1.5 sqmm cable conductor, one run of 1.5 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.
Providing suitable hole in stone masonary or any type of wall for Exhaust fan of 300 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified & as directed.
S&F MCB distribution board double door type, SPN 4 way sheet steel powder painted with bus bar neutral link earth bar etc. Make-Havells/Legrand/Schneider
Supply & fix, MCB SPN 40 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge. Make-Havells/Legrand/Schneider
Supply & fix MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge. Make-Havells/Legrand/Schneider
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make-Havells equivalent in Philips/CG
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ,connecting wire and all accessories including taking down Existing exhaust fan and deposit to E&M store all as specified and as directed by the Engineer-in-Charge. Make-Havells or equivalent in Anchor/Usha.
STANDARD AGENCIES
VACON INFRASTRUCTURES
K LAKSHMAN SINGH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .