Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | LI₹49.3 LAccepted-AOC PO VIKRAMKHAND ROAD LANE NO 05 HOUSE NO 16 ASSAM 788007 | CACHAR | ASSAM | 788007 | LI | Accepted-AOC Being L1 Bid | |
| 2 | L2₹51.2 LRejected-AOC | L2 | Rejected-AOC Being higher than L1 Bid | |
| 3 | L3₹51.6 LRejected-AOC | L3 | Rejected-AOC Being higher than L1 Bid | |
| 4 | L4₹52.6 LRejected-AOC | L4 | Rejected-AOC Being higher than L1 Bid | |
| 5 | L5₹53.2 LRejected-AOC | L5 | Rejected-AOC Being higher than L1 Bid |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
18 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SILCHAR
GE SILCHAR, PO-ARUNACHAL, DIST-CACHAR, ASSAM-788025
PROVN OF RETAINING WALL BEHIND NEAR T 08 T 22 T23 T24 T 63 AND CERTAIN OTHER SANCTIONED WORKS AT AIZAWL UNDER GE SILCHAR
2022_MES_548303_2
8726/E8
Open Tender
Civil Works
Item Rate
270 days
AIZAWL
Class D category a i
7 documents required · 7 mandatory
₹500
Yes
GE SILCHAR
₹97,000
Yes
8 Nov 2022
8 Oct 2022
20 Oct 2022
8 Oct 2022
18 Oct 2022
14 Oct 2022
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cum each, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil , complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil , complete all as specified and directed.
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc. and getting out in soft / loose soil complete all as specified and directed.
Rough excavation not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.
Excavating Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in with soil obtained from excavation including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Removing excavated material to a distance exc. 500 m or part thereof beyond 500 m and upto total distance of 1.5 km , complete all as specified and directed.
M&L for PCC 1:2:4 type B-2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.
All as per Srl item No 12 above but but 6 to 8 mm dia.
Material and labour for formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.
Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for Reinforced cement concrete 1:1.5:3 type B-2 using 20 mm ;graded aggregate in foundations, including rafts, as in footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for Reinforced cement concrete 1:1.5:3 type B-2 using 20 mm ;graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.
Material and labour for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted,built in built in cement mortar 1:6 complete all as specified and directed. ( Note : Net qty without bond stone shall be measured & paid for )
Material and labour for Providing precast cement concrete in PCC 1:3:6 type c-1 as in bond stone incl form work set & jointed in cement mortar 1:6 complete all as specified and directed.
Material and labour for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level using broken stone or boulders complete all as specified and directed.
Materials and Labour for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe -290-Gde E-165 complete all as specified and directed.
Supply only 11 to 15 mm dia MS screw bolts (machine made ) with hexagonal or square heads at one end & screwed the other or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut length of bolt exceeding 5 cm long but not exceeding 10 cm long complete all as specified and directed.
Supply only Chain link fencing mesh size 50mmx50mm and dia of wire 4mm galvanised steel wire complete all as specified and directed. Note:- Payment of line wire, bolts and nuts to be paid separately under item No. 21 to 23 above.
Fixing only of chain link fencing incl. line wires any mesh and type to any of standards rails, straining bolts etc including provision of binding wire complete all as specified and directed.
Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe 290 Gde E-165, complete all as specified and directed.
Supply and fix Wire netting of size of mesh in 25 mm of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.
Material and labour forrendering 10 mm thick cement rendering on fair faces of brick wall or concrete surfaces in CM (1:4) finished fair and even complete all as specified & directed.
Material and labour for rendering 15 mm thick cement rendering on fair faces of stone masonry surfaces in CM (1:4) finished fair and even complete all as specified & directed.
Material and labour for Flush pointing to squared rubble masonry, coursed or uncoursed in cement mortar 1:3 complete all as specified and directed.
Material and labour for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
Material and labour for 50 mm thick PCC 1:2:4 type B-1 using 20mm graded stone as in floor , finishing cement concrete surface even and smooth without using cement extra cement complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete in surface channels and drains complete all as specified and directed.
Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified & directed.
Supply and fix 75 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints as in weep holes complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints as in weep holes complete all as specified and directed.
Material & Labour Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specified & directed
M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm in width or girth & applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
P K ROY & SONS
m/s builders and suppliers
SURANA CORPORATION
M/S TAPAN KUMAR RAY
M/S LUIT CONSTRUCTION
M/S RAJU ENTERPRISES AND BROS
M/S R A ENTERPRISE
M/S M P Sharma
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .