8264 ADDITION/ ALTERATION OF BATHROOM AND OTHER WORK OF PA-242 BUILDING OF INS VAJRABAHU AND PROVISION OF EMERGENCY ESCAPE LADDER AT BUILDING NO P-198 OF SYSTEM DEPARTMENT AT ND (MBI) UNDER GE(NW) KUNJALI

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of brick bats, terracing tiles, etc on roofs and removing the same to store from terrace of high rise bldg etc complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and removing to store from terrace of high rised bldg all as specified.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15mm thick screeding in cement mortar 1:4 finishes even and smooth using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).

M & L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane etc complete all as per particular specification , manufacturers instructions and as directed by Engineer-in-Charge. Note : Rate inclusive of taking down and re fixing of existing lightning arrestor system including povision of new PCC block for damaged PCC block complete as directed by Engineer-in-charge

M&L cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed (with grey cement and pigment), set jointed and pointed in neat cement slurry in floors and cut and polished over & including 20 mm thick bedding layer in cement mortar 1:4 all as specified.

Supply only integral water proofing compound

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.

All as per item No 12 above but 20 mm bore GI Pipe.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc

M&L brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified.

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan to any radius in half brick thick wall built in CM 1:4.

S & F Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F in repair 12mm thick, toughened glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed.

S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and as directed by Engr-in-Charge.

S&F Prelaminated particle board, 19 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work. All as specified and directed.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.

S&F Extrude aluminium anodised alloy handles, fabricated type 200mm size.

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.

Cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate)

S&F soap dispenser all as specified and directed.

Demolition/dismantling of stone slabs/paver blocks and tiles of any description or thickness laid bedded and pointed in any mortar in floors, approns etc. and clean the surface to receive screed bed to lay new tiles

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in Gate pillars, steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M & L for reinforced cement concrete M-25 (20 mm graded stone agg) design mix in columns, pillars, posts/slabs etc complete all as specified and directed

Formwork to sides of pillars, posts, struts, piers, columns or slabs, and finished fair & even, complete all as specified

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column ends and binding with and including mild steel wire(Annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L MS Steel Bar 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binder all specified as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Ornamental and intricate design framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W (Gde E-250) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.

70 mm dia cast iron ball grade F.G. 150 machined in pulleys and similar articals as specified and directed article not exc 5 kg each

MS Plate as in wall cladding steel gates and similar work 1.6mm thick all as specified and directed

M & L for butt hinges conforming to Fe-290 Gde-E-165 suitable for fixing to stone/ concrete and Iron Gate, all as specified

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for Mild steel in flat, round or square bars, in available lengths of Fe 410-W (Gde-E250) quality-A complete all as specified.

Surface exacavation n exc 30cm deep and averaging 15 cm deep and getting out hard/dense soil.

Excavation in trenches n exc 1.5m wide and n exc 1.5 m depth fior foundation etc in Harde/dense soil complete.

M&L for PCC 1:4:8 type D2 for foundation filling & mass concrete.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate including necessary form work for copping.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm (soft/loose soil & hard soil).

Removal of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above starting point.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel (Make -Armstrong/Chanakya/Everest.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

As per item No 50 above but 20mm dia medium GI Pipe

S&F in repairs vitreous china wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) but with & including plastic seat cover of approved colour with flat bottom , and cover and mild steel chromium plated or aluminised hinging device etc complete

S&F in repair counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe with bottle trap complete all as directed

S&F in repairs PVC low level flushing cistern 10 Ltr capacity with complete fittings, flush pipe & float valves,handle incl brackets etc complete.

S&F in repairs health faucet ABS body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed by Engr-in-Charge.

S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.

S&F brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs.

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with silvent cement

M&L 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end.complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even and smooth without using extra cement all as specified and directed.

M & L rendering 15mm thick plastering on brick wall or concrete surfaces in cement mortar 1:4 by using water proofing compound finished fair and even complete all as specified.

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer.

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall including preparation of newly plaster surface and necessary scaffolding upto G-3 storey complete all as specified and directed by EIC.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc all as specified and directed.

M & L for Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including necessary scaffolding complete all as specified and directed

M&L prepration of old plastered / decorated surfaces of walls including complete removal of existing treatment by washing, rubbing down and stopping of distempered and painted surface and applying two coat of oil bound distemper over alkaline resistant primer with 3mm thK wall care putty on wall surfaces etc complete all as specified and directed.

S&F in repair of vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified.

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S &F in repairs 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for complete all as specified and as directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

Removing bldg material exc. 1.50 km but n exc. 5 km and depositing where directed

M&L for cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc.

M&L for cutting opening, through brick wall for door, window and other opening or enlarging existing opening built in CM. converting window into door opening etc or cutting our defective brick work for under pinning, including providing , fixing and removing shoring ,cleaning and stacking bricks, hard core, etc to store and rubbish not exc 50m.complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; hold fastener, railings; hand rails, framework of water tanks and similar work etc conforming to Fe.290.Gde-E-165 Note : The stair shall be fixed around centrally iron pole(Spiral stair) or as per direction of EIC

S&F 4.8mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed

M&L for making good under cils or over arches , lintels and bressummers, including all pinning,cutting , to match existing work in CM 1:4 complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power/bell) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge.

M&L for concealed point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessories with cover plate and frame including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including modular box and cover plate all as specified.Notes: (a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green (b) Make of wire : Polycab/ Havells/ Finolex/Plaza/Benlo (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit/PVC Casing Capping. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

One light point controlled by one switch

One ceiling fan/wall fan/exhaust fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5A flush type switch socket point on same board

M & L for concealed point wiring in repair with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC conduit not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:-

One 15A flush type switch socket point on independent board

M&L for concealed submain wiring in repair with 2 runs of 6 sqmm and 1 run of 6 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC conduit not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

Supply and fixing in repair walll/surface mounted 18W LED inverter batten fitting, 4ft size, works on AC supply in normal mode and DC supply in inverter mode with inbuilt battery back up of upto 4 hours, high efficiency, high lumen output complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed by Engr-in-Charge.

S&F in repair LED mirror light 10W, aesthetically designed with multiple body colour options, high efficiency LED, opaque diffuser, inbuilt driver including control gear and lamp complete all as directed and specified by Engr-in-Charge. Make : Shakti cat part SZWPFPX010 or equivalent

S & F in repairs modular switch 1 way 6A, 1 module all as specified and directed. Make: Anchor/Roma/Legrand.

Supply and fix in repair modular switch 1 way 16 Amps 1 module 240 volts flush type complete all as specified and directed.

Supply and fix in repair modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix in repair ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and directed.

S&F in replacement of steel sheet enclosure double door type IP54 IK09 protection DB SPN 8 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed.

S & F in repair MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and directed.

S & F in repair MCB SPN 40-63 Amps, 10 KA Rupturing capacity complete all as specified and directed.

S&F of heavy duty exhaust fan of size 300mm sweep complete set with louvers connecting up including provn of three core flexible copper wire from ceiling rose to exhaust fan complete all as specified and directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

M & L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm gi pipe light grade for protection.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece (hot and cold pipe) etc.

Taking down old unserviceable Gate valve Supply and fix gun metal gate valve, with iron wheel head screwed both ends for iron pipe of 25 mm bore incl provn of union nipples sockets etc.

Taking down old unserviceable GI/MS and Supply and fix GI tubes medium grade of 20 mm dia complete with all fittings (like; union, tee, bend, elbow, reducer, socket) to be fixed on wall and ceilings or laid in floors/trenches complete of following bore of pipes:-

Supply and fixing of BLDC ceiling fan 1200mm sweep, BEE 5 Star rating, single phase complete all as specified and directed.