SPL REPAIRS/ REPLACEMENT OF OLD ALUMINIUM/ COPPER WIRING AND CONNECTED ITEMS IN BLDG NO. WB-03, DS ROOM RAMAN BLOCK AND OTHER BLDG AT VARIOUS LOCATION UNDER GE (MCTE) MHOW

Amount

Taking down carefully copper/ alluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendents, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc complete all as specified

Taking down existing ceiling fan/ exhaust fan/ Wall fan of any size and re-fixing the same after B/R work including overehauling/ servicing, winding of the fan, replacement of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter and providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified

Taking down carefully TPN DB/ SPN DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc complete all as specified

Taking down carefully light fitting any type for refixing or taken in schedule of credit complete all as specified

Taking down existing old unserviceble LT UG/ service cable of any descrition and size complete all as specified

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC surface conduit/ casing caping of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular GI sheet metal/ PVC flush box, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Note:- Make of modular GI sheet metal/ PVC box should be same with switch/ socket.

(a) One light/ fan point controlled by one switch, complete all as specified.

(b) One light controlled by one, two way switch 5/6 Amps, complete all as specified.

(d) One socket outlet 2/3 pin 5 Amp, multipurpose on same board with other switches, complete all as specified.

(c) One switch/ socket outlet point 2/3 pin 5 Amp multipurpose on independent board, complete all as specified.

All as per Item No.07 above, but with FRLSH cable 2.5 Sqmm stranded copper conductor for switch/ socket outlet 5 Pin, 15 Amps multipurpose controlled with 2.5 Sqmm copper conductor FRLSH cable as continuous earth wire of green colour on independent board. Note:- Make of modular GI sheet metal/ PVC box should be same with switch/ socket.

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Note:- Make of modular GI sheet metal/ PVC box should be same with switch/ socket.

(a) One light/ fan/ bell controlled by one, one way switch 5/6 Amps, complete all as specified

(b) One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch, complete all as specified

(c) One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch, complete all as specified

Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular flush box, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size incl taking down carefully copper/ alluminium power point wiring switches, sockets, and making good disturbed surface of walls and floors etc. complete all as specified and directed Note:- Make of modular GI sheet metal/ PVC box should be same with switch/ socket.

All as per item No.13 here in before but using 4.0 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 4.0 Sqmm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V, complete all as specified

S&F modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F modular switch 2 way 6 A, 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified

Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 4-10 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified.

S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts including taking down old u/s complete all as specified.

S & F in repairs for LED luminaire 2 x 2 ft (size 600 x 600mm) square LED panel 35/ 36 watts, 220 volts, AC recessed/ surface mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified

S & F for LED down light round Surface/ Recessed Mounted 15 watts, aluminium housing and heat sink for better thermal performance white finish operating AC, 50 Hz, with high efficiency PMMA diffuser soft glare free light complete with drivers, complete all as specified

S&F flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of space for 125 Amps MCCB as incomer and SP/ SPN/ TP MCBs as out going, 6 way (Optium 1+18 Module) including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified

S&F for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified

S&F MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 100 Amps to 160 Amp Adjustable type with breaking capacity 16 KA complete all as specified.

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified.

S&F Amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of 4P 63 Amps and current carrying capacity in the MCB DB including connection with using suitable size aluminium/ copper lugs complete all as specified

S&F MCB DB SPN 12 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified

S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified

S&F MCB DB SPN 4/6 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified

S&F 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DBncluding connection with using suitable size aluminium/ copper lugs complete all as specified

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB ncluding connection with using suitable size aluminium/ copper lugs complete all as specified

M & L for sub main wiring with 04 runs of 10 Sqmm main wire along with 02 run of 10 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same, complete all as specified Note:- four runs of main copper conductor, two run of earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for sub main wiring with 02 runs of 6 Sqmm main wire along with 01 run of 06 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified Note:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

All as per item No. 40 here in above but with 2 runs of 4 Sqmm main wire along with 01 runs of 4 Sqmm earth wire.

S&F replacement of ceiling fans complete with blades, down rods 15mm/ 12mm upto 2.5 mtr, electronic regulator and remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.46 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including writing the MES number with synthetic enamel paint complete all as specified and directed.

S & F Galvanised, steel rod 16/ 15mm diameter and length from 0.5 meter to 2.5 metres as per site requirement complete all as specified and directed.

M & L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core laid in pipes, trenches/ ducts, on poles complete all as specified

S & F Integral decorative LED bollard with opal acrylic diffuser and IP-66 protection suitable for 9 watts LED bulb, 5700K with necessary MS base box made out of MS sheet of 2mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable one complete all as specified

S & F for LED post top lantern 30 watt light fitting made of fully cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection mepro PTL-02 with polyurethane paint with acrylic window cover, provided B22 brass holder including bulb 12 watts with aluminium cover complete with all accessories fixed on GI pipe 50mm dia including removal of old unserviceable one complete all as specified and directed.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core laid in pipes, trenches/ ducts, on poles complete all as specified

Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified

Auto Traders (BID ID -3245821)

Vinayak Trading House (BID ID -3252437)

M/s Navansh Engineers & Consultants (BID ID -3252332)

MODI CORPORATION (BID ID -3246032)

Mighty Steel Sales Crop (BID ID -3252917)

ENVIRO TECH SERVICES (BID ID -3245752)