ADDN /ALTN AND IMPROVEMENT TO BUILDING NO D-1 (DELTIC SH ) PROVISION OF ADDITIONAL LED LIGHT FITTING MOORA NAVAN PARK AND SPECIAL REPAIRS TO REPLACEMENT OF EXISTING UNSERVICEABLE STREET LIGHT INTO INTEGRATED LED SOLAR STREET LIGHTS AT MO(MB) GHATKOPA

Amount

Dismantling asbestos cement (corrugated semicorrugated, etc) sheets in roof covering including ridge, north light curves etc complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/rigdes, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof, including necessary scaffolding etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of truss ,purline, rafter, vallay gutter and expended metal any description not other wise provided for complete all as specified and directed..

S&F for roof trusses (framed) trussed, Purlins, crane gantries, rails and fastenings and heavy brackets framing(Beam, Angle, Channel or flat section,plain plates) including distance pieces, cleats ,welding and braceing etc,Fe-410W(Gde-E-250)quality -B, including necessary scaffolding etc complete all as specified and directed.

S & F Mild steel Angles, bars, flats ,plane angle cleats for securing to vallay gutter supports, wall ties,securing purlins J or L hook clamps with nut bolts,washers and similar small articles confirming to Fe 290 or Gde-E165 complete all as specified and directed.

Supply and fix Turbine Air Ventilator of 735 mm center dia, turbine neck dia 600mm, turbine height 410 mm, 42 Nos of blades of high grade Hindalco H-14 AA 1200, Double ball bearing permanent lubricant type of size 60001ZZ, top cover inner cover ring stainless steel of 304 grade,FRP base plate of size 1.05 metre x 1.7 metre x 2mm thick (minimum), UV stabilized, gel coated exhaust capacity 1972 CFM (minimum), Turbine net weight 6 Kgs, FRP net Base plate weight 7 Kgs, all as per ISO 9001-2015 certified, complete in all respects as per manufacturer design subject to approval of GE.

S&F 2 mm fibre glass reinforced translucent corrugated sheeting of a similar pattern as that of PPGI sheet with two corrugations side lap fixed with coach screw, GI 'J' or 'L' hooks in roof complete all as specified and directed.

M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free or equivalent) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed.

M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in soft/loose soil for removing/laying of cables complete all as specified and as directed by Engineer-in-charge.

Returning, filling including spreading , leveling , watering and well ramming in layers n.exc 25 cm complete all as specified and as directed by the Engineer-in- Charge

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Fixing only , Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 25 Sqmm, 3.5 core complete all as specified.

Fixing only HDPE pipes of pressure rating 6 kgf/cm2 (PE-63 grade) of size 32 mm bore laid in trenches for passing of cable complete all as specified and directed.

Fixing only LED bollards light fitting 10 to 15 watt mushroom shaped made in cast aluminium spigot housing with decorative clear acrylic diffuser for pleasant light output and weather proof and IP65 protection complete all as specified and directed.

Fixing only highly efficient high power multi LED flood fitting 100 watts with pressure die cast aluminium housing reflector and enclosed with toughened glass IP66 complete prewired and connecting with 0.5sqmm 3 core flexible wire including fixing arrangement on wall etc complete including dismantling of existing unserviceable flood light fittings complete all as specified and directed by Engineer in Charge.

Fixing only highly efficient high power multi LED flood fitting 120 watts outdoor type,thermal management with pressure die cast aluminium housing reflector and enclosed with toughened glass IP66 complete prewired and connecting with 0.5sqmm 3 core flexible wire including fixing arrangement on wall etc complete including dismantling of existing unserviceable flood light fittings complete all as specified and directed by Engineer in Charge.

Fixing only in repairs highly efficient high power LED street light fitting 70W outdoor type with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP65 protection AC 220 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting.

Fixing only in repairs highly efficient high power 60 W LED street light fitting with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP66 protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting.

Supply and fix in repairs pipe bracket made out of 40 mm dia GI pipe, medium grade, upto 1.5 mtr long, bent to shape and fixed on existing pole/ wall complete all as specified and directed. Note : Clamps nuts bolts etc will be measured and paid seprately under relevant items.

Supply and fixing in replacement pole mounting box FRP type of size 140mm x 140mm x 100 mm, 3 phase with locking arrangements including necessary nut, bolt and clamps of the flat iron of size 20mm x 3 mm comprising of MCB SP 6 Amps, 240 Volts, 10 KA, 'C' series and 3 phase connector 100Amp for incoming/outgoing cables with proper fixing arrangements on pole / wall complete all as specified and directed. Make: National/ Sintex

M & L in repairs for sub main wiring PVC copper cable 2.5 sqmm (02 Run & 01 Run of 2.5 sqmm) copper conductor 1100 Volt grade multi core multi stranded PVC insulated unsheated drawn through and including PVC conduit and accessories fixing on poles/ wall with clamps, nuts bolts etc from FRP box to street light fiting complete all as specified and direcetd

Dismantling exsting RCC & steel tubular poles with bracket & light and in lieu S&F 7 metre long hot dipped galvanised octagonal poles with top A/F 70mm bottom A/F 130 mm, made out of 3mm thick HT sheet alongwith base plate of size 220*220*12mm, including 1500mm long single arm bracket made out of 48mm dia, GI pipe, M20 in PCD 205mm, 700mm long and projected 100mm, "J" type EN8 grade set of 4 Nos foundation bolts alongwith templates, also including provision of the followings :- (a) MCB,SP,6A,230V, B series, 10KA mounted on and including 3mm thick plastic laminated sheet-01 No. (b) 4 way connector, bolt type having locking arrangement, weather proof and water proof control space : 01 No. Notes: (a) The rate quoted shall also be deemed to include the cost for provision of 50mm bore PVC pipe from cable trench to centre of the pole concrete of the pole concrete. (b) The earth work, RCC foundation reinforcement and form work will be measured and paid separately. (c) .quoted rate shall also be deemed to include for fixing of old light fitting retrived from dismantling. Make : BAJAJ Model BOP-7030 or its equivalent in Crompton/Philips / Wipro as approved by the GE.

M&L for PCC type D-2, 1:4:8 using 40 mm graded aggregate as in Cement concrete in foundations, filling and mass concrete complete all as specified and directed

M&L for mild steel TMT bars 10 to 12 mm dia and over cut to length, bent to shape required, stirrups, spaces and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed

M&L for RCC type B-1, 1:2:4 (nominal mix) using 20 mm graded stone aggregate as in footing, columns, post, pillars, piers, wall of culverts, suspended slabs, edges and struts etc complete all as specified and directed

M&L for farm work to sides of concrete footings, columns, posts, pillars, piers, edges and struts of rectangular or triangular shape for rough finished flat concretesurface complete all as specified and directed

Supply, fabrication, errection , commissioning and testing of High Mast lights with motorised lowering and lifting of 16 meter high galvanized mast suitable for 08 Nos lantern symmetrically fitted along with their control gear and having two point suspension system with steel wire rope of 6 mm dia, thickness - 3 mm top and 4 mm bottom diameter of mast top 150 mm and 410mm bottom, and double drum winch, trailing cable - 2 Per mast (5 Core 2.5 sqmm) Lighting finial, Anchor plate & templete including foundation as per manufacturer specify with foundation bolts & Nuts complete. Make Surya/Philips/ Crompton

Fixing only Highly efficeient multi LED street light 90 watt with inteligent sense to Toggle between 50% and 100% Using inteligence sense sensing device Having pressure die cast aluminium housing, reflector and encloused with toghned glass ,IP65 Protection including taking down old unserviceable MH flood Light fittings depositing To MES store Yard complete all as specified and directed.

Supply and laying GI pipe 50 mm, light grade for the protection of the cable passing through road crossing, etc.

Fixing only,Testing & commissioning of LT XLPE insulated,Screened,PVC bedded galvanised steel strip or wire armoured,electric power cables with aluminium stranded conductor,1100 volts,grade cross sectional area 4 x 16 sqmm confirming to IS : 7098(part-I) -1988 and as specified and directed by the Engr-in-Charge.

S&F in replacement of Cable route indicator made of CI 100mm dia welded and fitted with MS angle Iron 40 x 40x 6 mm, 45 Cm long. The angle shall be grouted in PCC block 1:3:6 type C-1 (20 mmGraded aggregate) of size 150 x 150 x 150mm. The CI round shall be embossed with the work “MES LT Cables” complete all as specified and as directed.The cable path indicator shall be painded by Blue Colour.

M&L for TMT steel bars 6 to 8 mm dia as in strirups, spacers,binders cut length bent to shape required, including cracking binding spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm di or ecuring with clips etc,complete all as specified and directed

Fixing onlyand drawing through the pole for making connections to the light fittings,three core,PVC insulated and sheated, Heavy duty,1100 volts grade,multistranded copper conductor(FRLS) cable 2.5 sqmm, complete all as specified and directed

Fixing only Highly efficeient multi LED street light 100 watt with pressure die cast aluminium housing, reflector and encloused with toghned glass ,IP65 Protection including taking down old unserviceable MH flood Light fittings complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 32x6 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Taking down existing unserviceable street light fittings , all electrical connections all as specififed and directed.

fixing only solar integrated system LED street light fitting 30 watt with Lithium ferrous phosphate battery dimming version(LFP),PIR inbuilt option of MPPT charge controller available solution with Li-Ion seperately available power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 complete including warranty for light fitting 2 years after completion of the work complete all as specified and dircted.

Dismantling exsting RCC & steel tubular poles with bracket & light and in lieu S&F 5 metre long hot dipped galvanised octagonal poles with top A/F 70 mm bottom A/F 130 mm, made out of 3mm thick HT sheet alongwith base plate of size 220*220*12mm, including 1500mm long single arm bracket made out of 48mm dia, GI pipe, M20 in PCD 205mm, 700mm long and projected 100mm, "J" type EN8 grade set of 4 Nos foundation bolts alongwith templates, also including provision of the followings :- (a) MCB,SP,6A,230V, B series, 10KA mounted on and including 3mm thick plastic laminated sheet-01 No. (b) 4 way connector, bolt type having locking arrangement, weather proof and water proof control space : 01 No. Notes: (a) The rate quoted shall also be deemed to include the cost for provision of 50mm bore PVC pipe from cable trench to centre of the pole concrete of the pole concrete. (b) The earth work, RCC foundation reinforcement and form work will be measured and paid separately. (c) .quoted rate shall also be deemed to include for fixing of old light fitting retrived from dismantling. Make : BAJAJ Model BOP-7030 or its equivalent in Crompton/Philips / Wipro as approved by the GE.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 92,950.00 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

C S Sharma and Co