REPAIRS TO ROLLING SHUTTERS, CGI SUNSHADE GATES DOORS WINDOWS VENTILATORS GLASS PANES VENETIAN BLINDS ETC UNDER AGE BR I AREA AT RCI HYDERABAD UNDER GE I RND RCI HYDERABAD

Amount

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but n.exc 4 Sqm complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

M&L, making good under cills or over arches, lintels and bressummers including all pinning when necessary in cement mortar 1:4 finished to match with the existing work complete all as directed.

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F in repairs, mild steel framed work such as grills, gratings etc., framed guard bars and similar works conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (B) Area exceeding 2.00 sqm

S&F of fixed louvered ventilator made out of multi chambered uPVC sections fusion welded joints with glazing bead with EPDM black gasket having isolated drainage and reinforced with galvanized iron profiles throughout the window. The outer frame having an overall size of (60mm x 36mm x 2.2mm)/(60mm x 58mm x 2.2mm) with reinforcement of 1.2mm thickness including 5mm thick frosted glass and stainless steel wire cloth, 0.36 mm nominal dia and average width of aperture 1.40 mm fixed complete all as specified and directed. Make: Aparna Venster or equivalent

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) sliding shutters for windows with one or more rebates including joining cleat, handles and suitable locking arrangements etc., for fixing complete all as specified and directed

S&F, aluminium powder coated of any colour ventilators, partly louvered and partly fixed type without sash bars including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, louvers etc., complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed.

S&F EPDM washers for fixing glass complete all as specified and directed.

M&L for Sheet glass 3 mm thick, ordinary quality tinted glass exc 0.5 sq. m in each pane all as specified and direcfted.

M&L figured glass 3 mm thick pin head type and glazing with glazing clips n. exc 0.5 sqm in each pan complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over 10cm girth or width over a coat of red oxide primer complete all as specified and directed.

Easing of aluminum window with openable shutter or sliding window by adjusting rollers, bends in tracks, hinges, handles, tower bolts, oiling /greasing in hinges and making fully functional complete all as directed.

S&F Aluminium powder coated/ colour anodised frame, for door, windows, ventilators, partitions, door shutters, window shutters, including necessary joining cleats, glazing clips, ruber neoprene packing, handle 2 Nos in each door, hinges, roller, anodised aluminum snap beading screws etc to receive 5 mm thick sheet glass and 12 mm thick pre-laminated particle board all as specification and directed.

S&F MS grills (weight of grill shall not be less than 2.5 Kg/sqm) of approved quality and design complete all as specified and directed.

S&F, Ball bearing for rolling shutters complete all as specified and directed.

S&F in repairs, steel rolling shutter 1.25 mm thick laths without ball bearing including top hood cover, anchoring rod, hasp including one shop coat of primer and erected in position as indicated complete push, pull or manual type and making good the existing surface etc complete all as specified and directed.

All as per item No 31 above but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F,aluminium door lock seven lever vertical type brass body ,100 mm long with duplicate key complete all as specified and directed Make: Godrej,Link,Harrison

Taking down existing mildsteel shaft 125 to 150mm and 4mm thick providing new shaft class 'C' including necessary cutting,welding,drilling holes and refixing the bearing and other mounting accessories for rolling shutters of any size complete all as specified and directed

S&F,in repair motorised rolling shutter motor along with push button,side bracket with chain sprocket and washer from existing location,supplying and fixing new rolling shutter motor with bracket and push button suitable for rolling shutter of weight not exceeding 1000 kg complete all as specified and directed

S&F,in repair motorised rolling shutter motor along with push button,side bracket with chain sprocket and washer from existing location,supplying and fixing new rolling shutter motor with bracket and push button suitable for rolling shutter of weight not exceeding 600 kg complete all as specified and directed Make: Jielong or equivalent as approved by GE

M&L in repairs gypsum board false ceiling 12 mm thick in ceiling fixed with screws as per manufactures specifications made by India gypsum Ltd including finishing with one coat of putty and two coats of oil bound distemper over a coat primer all as directed to match existing ceiling.

S&F 25 micron sun control film on glass reflective type, best quality, sticked to glass panes as per instructions of manufacturers, fixed in repair.. Make : Garware or equivalent.

Dismantling structural steel work including doors,gates but excluding framed truss etc.,complete all as directed

S&F,mild steel framed work such as ornamental and intricate design framed and hung gates,grills,etc., with ends of bars shouldered and/or riveted,or forged into spikes,barred iron doors ,and similar works including pintle hinges,stops,hand-made sliding bolts,etc.,conforming to Fe-290 Gde E-165 complete all as specified and as directed

Taking down existing horizontal /vertical type venetian blinds in any position including aluminium metallic slot rail and all fittings and refixing the same in its original position after cleaning, repairing, over hauling, replacement of damaged nylon rope, thread, operation chords, aluminium rail, rear wheel, locking wheel, thronging the blinds, strips and ensuring free the smooth functioning of the blinds and making good to the disturbed surface including replacement of the blinds with same colour quality complete all as specified and directed.

S&F in repairs, vertical type venetian blinds of colour as approved by GE, 100mm wide fabric blinds including operation chords, threads, counter nut, connection chain etc, including necessary fittings complete all as specified and directed.

Carrying out inspection by checking various parts of rolling shutters. collapsible gate and steel door, greasing/oiling as required to make the collapsible gate, sliding steel door, rolling shutters gear or hand or electrically operated for easy and smooth operation etc., to entire satisfaction of users complete all as directed for the following:- Note: Parts replaced will be measured and paid separately.

Rolling shutter hand operated not exceeding 16 Sqm

Rolling shutter gear operated exceeding 16 Sqm and not exceeding 25Sqm.

Rolling shutter electrically operated exceeding 25 Sqm and not exceeding 36Sqm.

Mild Steel Sliding door exceeding 25 Sqm and not exceeding 36Sqm.

Collapsible gate exceeding 5Sqm and not exceeding 15 Sqm

M/S SARASWATHI CONSTRUCTIONS (BID ID -3330774)

Mourya Enterprises (BID ID -3329975)

sanjar enterprises (BID ID -3331017)

Sky Construction And Trading Company (BID ID -3327767)

PVRCS ENGINEERS (BID ID -3328256)

CSR CONSTRUCTIONS (BID ID -3328473)

J.V.V.K.PRABHAKARARAO (BID ID -3328386)