Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4.5 L
EMD Value
₹9,000
Closing Date
28 Dec 2020, 4:00 pmClosed
Er. Joginder Paul
Executive Engineer, Construction Division Jammu, J and K Sports Council
Renovation of Manager office at Udhampur Stadium.
2020_SPORT_111769_3
E-18/18 OF 2020-21 Dt. 17-12-2020.
Open Tender
Civil Works
Item Rate
90 days
UDHAMPUR
Please refer Tender documents.
4 documents required · 4 mandatory
₹200
Yes
Executive Engineer, JK Sports Council
₹9,000
Yes
Executive Engineer, JK Sports Council Jammu
5 Jan 2021
18 Dec 2020
29 Dec 2020
18 Dec 2020
28 Dec 2020
19 Dec 2020
26 Dec 2020
Amount
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.including disposal of materail as per direction of Engineer incharge
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) including all lead lift and carraige complete
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including all lead lift and carraige complete
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area of 3 sqm. and below
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge of 35mm thick Second class deodar wood
Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type Ply wood 7 ply, 9mm thick
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood of 35mm thick
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work
Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the wall and floors wherever requiedW.C. pan with lSI marked white solid plastic seat and lid.
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White
Providing and fixing of PVC waste pipe for sink or wash basin including PVC based fittings complete 32mm dia
Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
Providing and fixing of 8mm dia CP/ SS Jet with flexible tube upto 1m long with SS triangular plate to European Type WC of quality & make as approved.
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc. in Internal work-Exposed on wall of 15 mm dia. nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet of 100 mm diameter
Shower rod
Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 of 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 of 15 mm nominal bore
Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia
Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bushnof approved quality and colour 15 mm nominal bore with 30 cm length.
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design:Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating. including all lead lift and carraige complete
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes of 75 mm diametre
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm bend
Clearance of drain from back side of the building (old consoildated malba) filled drain in soil mixed with kankar, morroum, shingle & boulders
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in All kinds of soil. ncluding disposal as per direction of Engineer incharge
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia ( heavy type)
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth in All kinds of soil including disposal as per direction of Engineer incharge
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all lead lift and carraige complete
Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all lead lift and carraige complete
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch
3 pin 5/6 A socket outlet
6 pin 15/16 A socket outlet
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
Supplying and fixing brass batten/ angle holder including connection etc. as required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required
Supplying and fixing of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Double pole
Note :- 1) Any Tropical error shall be consider as per sanction schedule of rates/ estimates.
BALWAN SINGH
AKHIL SHARMA
KARAMVEER SINGH KOTWAL GOVT CONTRACTOR
CHANDER MOHAN
Anil Kumar
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .