REPAIR TO DOOR WINDOWS FLOORING FALSE CEILING ETC IN CERTAIN BLDGS AND CERTAIN BR WORKS AND REPAIR TO SEWAGE DRAIN AND GARBAGE BINS STORM WATER DRAIN PERIMETER WALL HARD STANDING ETC AT AF STN CHANDINAGAR

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge

All as item No 1 here-in-before but exc 1.5 sqm but not 4 Sqm each complete all as specified and as directed by Engr-in-Charge

Taking down shutter of any description n.exc 1 sqm each complete all as specified and as directed by Engr-in-Charge

All as per item No 3 here-in-before but exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed by Engr-in-Charge

S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints 2nd class hard wood complete all as specified and as directed by Engr-in-Charge

S&F pressed steel frames for doors with one or more related incl. necessary fixing lugs, hinges look strike plate etc. complete as specified size of frame105x60 mm complete all as specified and as directed by Engr-in-Charge

S&F pressed steel frames for doors with one or more rebated incl. necessary fixing lugs, hinges strike plate etc. complete as specified size of frame 125X60mm complete all as specified and as directed by Engr-in-Charge

S&F 35 mm thick 2nd class Hard wood plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and as directed by Engr-in-Charge

S&F 35mm thick 2nd class HW glazed and Skelten shutter open rebated and prepared and to receive glass gauze etc (without sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc supplied and fitted to chowkhats complete all as specified and as directed by Engr-in-Charge

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge

S&F 30 mm thick 2nd class HW glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (without sash bars) as in windows, ventilators etc complete all as specified and as directed by Engr-in-Charge

S&F 30 mm thick 2nd class HW glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers

S&F window with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-Charge

S&F window with side hung shutters including box type hinges with steel handle, and steel peg stay, complete but without glazing bars, devetailed or welded complete all as specified and as directed by Engr-in-Charge

S&F ventilators with top hung shutters including hinges, steel peg stay, complete but without glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-Charge

S&F PVC solid door frame of size 50mm X 47mm mode out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter ,30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frames shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert or top & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site complete all as specified and as directed by Engr-in-Charge

S&F mild steel barrel tower bolt stove enamelled with bright bolts of 200 mm long complete all as specified and as directed by Engr-in-Charge

S&F mild steel barrel tower bolt stove enamelled with bright bolts of 150 mm long complete all as specified and as directed by Engr-in-Charge

S&F mild steel butt hinges medium weight , cold rolled 100mm size of hinges complete all as specified and as directed by Engr-in-Charge

S&F mild steel butt hinges medium weight , cold rolled 75mm size of hinges complete all as specified and as directed by Engr-in-Charge

S&F mild steel butt hinges medium weight , cold rolled 50mm size of hinges complete all as specified and as directed by Engr-in-Charge

S&F MS pressed handle oval type stove enameled black 125 mm size complete all as specified and as directed by Engr-in-Charge

S&F mild steel pressed handle oval type stove enamelled 100mm size complete all as specified and as directed by Engr-in-Charge

S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engr-in-Charge

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

S&F Extruded aluminium alloy handle of size 100mm, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge

S&F 100mm aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and as directed by Engr-in-Charge

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge

Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each complete all as specified and as directed by Engr-in-Charge

S&F 3mm thick glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and as directed by Engr-in-Charge

S&F 3mm thick glass , pin headed type and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and as directed by Engr-in-Charge

S&F galvanised mild steel wire cloth 0.56mm normal dia of wire and average width of aperture 1.18mm complete all as specified and as directed by Engr-in-Charge

All as item 33 herein before but in repair complete all as specified and as directed by Engr-in-Charge

S&F FI as in bands, straps, hold fast, twist clamp , two way or three way strap and similar articles conforming to Fe 310-0 or Fe 410-0. complete all as specified and as directed by Engr-in-Charge

Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 Cucm each in 2nd class Hard Wood complete all as specified and as directed by Engr-in-Charge

M&L tarring back of chowkats etc are tarred exc 0.1 Sqm but not exc 0.5 sqm each complete all as specified and as directed by Engr-in-Charge

All as per item No 37 herein before but small articles such as hold fast area tarred not exc 0.1 Sqm each complete all as specified and as directed by Engr-in-Charge

M&L for PCC 1:3:6 type C-1 using 20 mm graded aggregate stone aggregate as in filling of pressed steel door frames and as in hold fast blocks incl all form work complete all as specified and as directed by the Engineer in Charge.

S&F 16mm dia round bar as in window guard bars, plain, let in and fixed independently in wooden frames, L or T Section support for shelves and similar articles conforming to Fe-290 Gde E-165 all as specified and as directed by Engr-in-Charge

All as per item No 40 above but fixing only in repair complete all as specified and as directed by Engr-in-Charge

M&L two coats of synthetic enamel painting to wood and wood based material surfaces of any description, not otherwise described over 10cm width or girth over pink primer incl preparation of new surfaces complete all as specified and as directed by Engr-in-Charge

M&L for preparation of surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed by Engr-in-Charge

S&F fixed in repair Aluminium extruded body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge

S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, sheets etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and as directed by Engr-in-Charge

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted , or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 including dismantling old one all as specified and as directed by Engr-in-Charge

S&F 5.5 mm thick ordinary quality ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charge

S&F in repair Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws complete all as specified and directed by Engr-in-Charge

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge

M&L fixed in repair 12mm prelaminated particle board, exterior grade , prelaminated both side with decorative choice lamination fixed to aluminium frame works and similar work as specified and as directed by Engr-in-Charge

S&F in repair 18/19mm prelaminated particle board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber with lipping all as specified and as directed by Engr-in-Charge

S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and as directed by Engr-in-Charge

Taking down cement plaster or lime plaster on Brick or concrete surfaces or stone walls incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engr-in-charge

M&L for 40mm thick cement concrete 1:2:4 type B1( using 20mm graded stone aggregate) as in padding/ base on roof complete all as specified and as directed by Engr-in-Charge

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces on roof finishing even and smooth without using extra cement and using water proofing compound all as specified and as directed by Engr-in-Charge (WPC shall be measured & paid for separately)

Supply only water proofing compound complete all as specified and directed by Engr-in-Charge

Material and labour for laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.00 Kgs/sqm reinforced with non-woven polyester fabric weight not less than 160 gms/sqm laid over one coat of bituminous primer @ 0.40 ltr/Sqm. Polymeric membrane shall be taken to a height of 30cm and then insert inside the groove of parapet wall and shall be finished by a membrane flashing , including complete removal of existing roof treatment including cement concrete any description and thickness, all debris materials shall be removed to a distance n exc 500 mtr,all as specified and as directed by Engr-in-Charge Note : (i) Laying APP based polymeric membrane shall be done torch on method as per manufacture instruction. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufactured instruction (iii) APP based polymeric membrane shall be 3mm thick manufactured by M/s STP Ltd or M/s IWL or Pedilite (iv) Bituminous primer shall be manufactured by M/S STP Ltd or M/s IWL or Pedilite (v) Rate of taking down OHT before operation and refixing the same after operation shall deemed to be included in the item rate where required (vi) Cement concrete base and rendering shall be measurement and paid separetaly under item No 2 & 3

M&L for applying two coats of water proofing paint with aluminium finish on top after preparation of newly APP layers complete all as specified and directed by Engr-in-Charge

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-Charge

Cleaning of septic tanks/soakage wells by removing effluent water and sludge by pumping with trolley mounted pump sets including carrying the waste water in closed containers and unloading it out side the MoD land at location shown by Engr-in-Charge at a distance n. exc 5 km from the starting point including removing the existing manholes cover and replacing the same, septic tanks/soakage wells of any size/depth complete all as specified and as directed by the Engr-in-Charge

Cutting and grubbing of bushes, grass and tree surrounding manholes, gully trap, bend, wall pipe and overhead tank etc and levelling of ground around the manholes and finish the surface of wall and removing the waste material to distance exc 50m and n exc 250m and clearing the site complete all as specified and directed by Engr-in-Charge

Cleaning of 150mm dia SWG sewage pipe line including manholes after removing the cover (cast iron or RCC covers) and placing the same after cleaning the manholes/sewage line complete all as specified and directed by Engr-in-Charge

All asper Ser No 62 above but dia 100 mm complete all as specified and directed by Engr-in-Charge

Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-Charge

Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-in-Charge

Excavation in trenches in soft/loose soil, n exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out complete all as specified and directed by Engr-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed by Engr-in-Charge

Removing excavated soil exc 250m but not exc 500m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge

M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge

M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in manhole covers set in CM 1:4 complete all as specified and as directed by Engr-in-Charge

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

M&L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm and width of bed as 450mm to drain pipes of 150mm internal dia including packing under, and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed by Engr-in-Charge

M&L for salt glazed stoneware drain pipes 150mm internal dia laid in trenches and jointed including demolition of existing SGSW pipe as specified complete all as specified and as directed by Engr-in-Charge

Cutting into existing Manholes for connecting new drains , 150mm dia, making good to pipes and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and as directed by Engr-in-Charge

H.B. Traders

High Tech Metal India

36SHRI RADHEY ASSOCIATES