8198 PROVN OF TILING AND FALSE CEILING IN BLDG NO WL 2 AT STY DEPOT PROVN OF HARD STANDING NEAR SPORTS GROUND AT AFMC ADDN ALTN TO CHAJJAS OF BLDG NO 80 AT AFMC PROVN OF CHAIN LINK FENCING AT APP SCHOOL AT AFMC PROVN OF WASHING CLOTH PLATFORM AT 25

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundation , etc and getting out in soft/loose soil complete all as specified and directed.

Rough excavation not exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation for post holes in soft/ loose soil not exc 0.5 Cum each and getting out including returning , filling by ramming earth and removing surplus soil at a distance not exc 50 m deposited as directed at a level not exc 1.50 m above the starting point complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specifiedand directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specifiedand directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for hardcore of gauge n exc. 63 mm using broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Demolition of reinforced cement Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing rubbish off the premises complete all as specifiedand directed.

Taking down cement plaster on brick or stone walls of concrete surfaces etc incl rackig out joints hacking for key, scrubbing down with water and removing rubbish off the premises complete all as specifiedand directed.

Dismantling of stone slabs and tiles of any description or thickness in floors and removing from site complete all as specified and directed.

Dismantling posts or struts (steel or R.C.C.) any section, embeded in concrete, brickwork, masonry etc, including taking out embedded portion and removing from site making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh , any type and removing from site complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D2 (40mm graded aggregate) as in foundation filling mass concrete complete all as specified and directed.

All as per item No 14 here-in-before but (1:3:6) type C2.

M & L for plain cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for RCC 1:1.5:3 type A1 using 20 mm graded aggregate in foundation including rafts, footing, foundation beams, plinth beam etc complete all as specified and directed.

All as per item No 17 here-in-before but in beams, cantilevers, lintels over 1.5m span etc.

All as per item No 17 here-in-before but in chajjas.

M & L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

M & L Cutting holes not exc 150 Sqcm each into brick / stone / PCC block masonry walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footing, bases of coloumn, plinth beam , flat rough finished surface of concrete complete all as specified and directed.

All as per item No 23 here-in-before but to chajjas and similar items.

All as per item No 23 here-in-before but to lintel, beam etc and similar items.

M & L for plain fillets made out of second class hard wood square rectangular or triangular in section exc 13 & n exc 25 sqcm, clean sawn, secured with nails or brads complete all as specified and directed.

M & L for plain fillets made out of first class hardwood (teak) square rectangular or triangular in section exc 6 & n. exc 13 sqcm wrought bullnosed, splayed, chamfered rounded on on edge or face complete all specified and directed.

S & F mild steel TMT steel bar 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No 28 here-in-before but as in stirrups complete.

S & F mild steel rolled section as in joist, channel, angle, rafter, purlins or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e within 20 mm of the length indicated) confirming to Fe 290 (Gde E- 165) complete all as specified and directed.

S & F Mild steel round bars 10mm dia and over, cut to length, bent to shape required for fencing complete all as specified and directed.

S & F Rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafters and running rails, fixed with angle cleats or other connecting plates confirming to Fe 290 (Gde E-165) including necessary welding , bolting , reveting etc complete all as specified & directed.

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as directed. Note:- Weight of chain link shall be ascstained through a BOO convened by the GE)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. Note: Color & Pattern of Galvalume sheet as approved by GE.

S&F Pre painted galvalume aluminium zinc coating GI based plain profil sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /clading to wall fixed with self taping screws all as specified and directed.

M & L for 6mm thick veneered decorative plywood, grade 1(with BWR resin) with one face decorative fixed with nails to timber frame work in walls/ ceiling complete all as specified and directed.

M & L for 12mm thick gypsum board for ceiling on aluminium powder coated grid of size 60cm x 60cm with using 36.5 mm x 23.5mm x 1.5mm thick maintee, 23.5mm x 23.5mm x 1.28mm crosstee and 25 x 25 x 1.5mmangles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nut for securing frame to ceiling suspended @1200mm c/c both ways, size of grid shall be 610mm x 610mm and finishing the surface with 2 coats of oil bound distemper complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

All as per item No 42 here-in-before but 100mm thick.

M & L for 75mm thick PCC (1:2:4) type B1 (using 20 mm graded aggregate) in floor as sub base complete all as specified and directed.

M & L for 25mm thick PCC 1: 2: 4 type B0 using12.5 mm graded stone aggregate) as under layer of kota stone flooring complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 46 here-in-before but in riser of step skirting, dado, pillar etc over and including 15mm thick cement plaster in CM (1:4)

M & L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including incl 15mm thcik screed bed in CM 1:6 all as specified and directed.

M&L for machine pressed precast concrete interlocking glossy finish paver block of any shape and size confirming to IS15658-2006 of 60 mm thickness, M-35 grade chemically coloured over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for coloured Ceramics tiles 300x200x7to8mm thick in vertical surfaces such as skirting dado and set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified and directed.

M & L for Rendering 15mm thick in CM (1:6) on fair faces of PCC block walling, finished even and smooth without using extra cement complete all as specified and directed.

M & L for Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:4) on stone masonry surfaces or other than fair faces of brick work or stone surfaces finished with sponge finish complete all as specified and directed.

M&L for two coats of acrylic distemper over a coat of chalk whiting after preparation of surface complete all as specified and directed

M&L for preparation of newly plastered surface of wall and apply two coats of cement base paint complete all as specified and directed.

M & L for preparation of new steel surfaces of any description , over 10 cm in width or girth , not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L for Complete removal of existing treatment and applying two coats of distermper over 2mm thick wall care putty including preparation of surface of walls complete all as specified and directed.

M & L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface with a coat of wood filler two or more coats complete all as specified and directed.

M & L for prepairng surfaces of wood and wood based materials, new or old of any description and girth not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

S & F 110 mm bore PVC pipe fixed in masonary wall as a spout complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, miters/stopped ends etc complete.

M & L for Point wiring using colour coding as per IS with 1.5 sqmm mulitistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through duly Casing Caping on wall / roof ISI marked with PVC boxes of suitable size including Modular cover and frame for mounting modular switches / sockets/ regulators etc and making good the disturbed surfaces to match with existng finishes and incluing 1.5 Sqmm copper conductor FRLS, PVC insulated cable as earth continuity conductor alongwith wiring and connecting to the common earth dolly all as specified and directed for (a) one light / fan point controlled by one, one way switch.

S & F Modular Switch single pole, one way 6 Amp complete all as specified and directed.

S & F for ceiling rose 2/3 termisals, PVC / polcarbonate, isolated body ISI marked complete all as specified.

Taking down ceiling fan of any sweep keeping it safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, over hauling the fan complete including spray painting with one coat of synthetic enamell paint including filling cavities with filler, one coat after cleaning all dust etc all as specified and directed.

S & F down rod made out of GI pipe medium grade 15mm dia of length 6 fit with fan clamps incl drilling, cutting, threading etc. and all other accessories for fixing ceiling fans all as per site requirement and as directed.

Suma Construction