MAINTENANCE OF SOLAR WATER HEATERS, SOLAR STREET LIGHTS AND DIESEL RUN ALTERNATORS, UNDER AGE E/M-I AND REPAIRS TO JOINERY, MS GRILL AND ALLIED WORKS IN TB-I AT BEG AND CENTRE AREA IN AGE B/R-II UNDER GE(CENTRAL) KIRKEE.

Amount

Maintenance and servicing of solar water heater tube/plate type with water tank of capacity 100 LPD including descaling and cleaning, checking any type of leakage in pipes, tank, panels etc also check for loose wire connection and repairing the same complete all as directed by Engr-in-Charge. NOTE :- cost of material incl quoted rate.

All as per Sl Item No.1 here in above but 200 LPD.

All as per Sl Item No.1 here in above but 300 LPD

Supply and fix in replacement all in one solar street light fitting 12 watt including galavanized steel pole of suitable height with in built, lithium ion battery, solar panel, charge controller with dusk dawn sensor complete including excavation of earth work complete all as specified and directed.

Supply and fix in replacement of LED luminary 11 watt 12 volts with built in charge controller and dusk dawn facility including wiring E-53 complete all as specified and directed. MAKE :- Bajaj/Phillips/Dynamic/Plaza power Constuction

Supply and fix in replacement of PVC copper conductor three core 4 sq.mm multi stranded wire complete all as specified and as directed. MAKE :- Havells/Plaza/Nicco

Supply and fix in repairs of air valve and pressure valve of solar water heater complete all as specified and as directed.

Supply and fix in repairs of holding rubber of glass tube of ETC solar water heater complete all as specified and as directed. MAKE :- Photon/Tata

Supply and fix in repairs of silicon coated glass tube set of ETC solar water heater complete all as specified and as directed. MAKE :- Photon/Tata

Supply and fix in repairs of silcon coated plate of FPC solar water heater complete all as specified and as directed. MAKE :- Photon/Tata

Supply and fix in repairs of ETC solar glass single tube with holding rubber for hot water complete all as specified and as directed. MAKE :- Photon/Tata

Supply and fix in repairs of 100 ltr corrosion resistance insulated tank of solar water heater complete all as specified and as directed. MAKE :- Photon/Tata

Supply and fix in repairs of 200 ltr corrosion resistance insulated tank of solar water heater complete all as specified and as directed. MAKE :- Photon/Tata

Supply and fix in repairs of 300 ltr corrosion resistance stainless steel tank of solar water heater complete all as specified and as directed . MAKE :- Photon/Tata

Supply and fix in repairs of heating element 2 KW to 3 KW for electricity back up of Solar complete all as specified and as directed.

Supply and fix in repairs of rubber pipe with clamp dia15 to 20 mm and length 0.5 mtr complete all as specified and as directed.

Supply and fix in repairs of HDPE pipe of dia 20mm along with all fittings for water supply connections complete all as specified and as directed.

Supply and fix in repairs of sheet metal enlosure with two pin and earth plug and soket complete with one double pole MCB complete all as specified and directed.

Supply and fix pipe in repairs of KITEC (PEX-Al-PEX) 20mm dia along with all fittings for hot water supply connections complete all as specified and as directed.

Material and labour for surface mounting analog time switches, daily dial, including dismantling / taking down un serviceable one, complete all as specified and as directed.

Material and labour for 3 pole power contactor, 415Volts, 40 Amps, including dismantling / taking down un serviceable one complete all as specified and as directed.

Supply and fix Rotational moulded polyethylene water storage tank of capacity 500 ltr (cylindrical vertical with closed top), four layered, ISI mark embosed on it, hoisted and fixed in position all as specified in SSR Part-I with necessary platform along with fitting for cold water supply of solar water connections complete all as specified and as directed.

All as per Sl Item No. 22 here in above but 250 ltr.

Material and labour gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe (ISI marked) and fixed complete all as specified and directed for the following sizes:- (a) 20 mm dia

(b) 25 mm dia

(c) 40mm dia

Supply and fix in repairs of on load change over switch 63A, 4 pole with steel sheet enclosure complete all as specified and as directed.

All as per Sl Item No. 27 here in above but 100 Amps.

All as per Sl Item No. 27 here in above but 125 Amps.

All as per Sl Item No. 27 here in above but 160 Amps.

All as per Sl Item No. 27 here in above but 200 Amps.

Maintenance and servicing of DG set 70 to 110 KVA, Make: Greaves Ltd including replacment of defective / wornout spares with new spares such as fuel filter, lube oil filter, gaskets, V belts, rubber hoses with clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and replacement of engine oil, tappet setting, servicing of radiator etc for the smooth operation DG set all as specified and as directed. NOTE :- (i) Replacement of spares such as fuel filters and oil filter including Nut, bolts, washers, clamps, screws and grease etc required for the service / maintenance of the DG sets deemed to be included in the above quoted rate. (ii) Other spares required for above will be measured and paid separately under relevent items of Sch.

All as per Sl Item No.33 here in above but 30 to 70 KVA make kirloskar

All as per Sl Item No.33 here in above but 15 to 25 KVA make kirloskar

Supply only air filter inner and outer for 70 to110 KVA DG set Kirloskar / Cummins.

Supply only Air filter inner and outer for 30 to 70 KVA DG set Kirloskar / Cummins.

Supply only Air filter inner and outer for 15 to 25 KVA DG set Kirloskar / Cummins.

Supply only fan belt for 70 to 110 KVA DG set complete all as specified and as directed. MAKE :- JK/Dunlop

Supply only fan belt for 30 to 70 KVA DG set complete all as specified and as directed. MAKE :- JK/Dunlop

Supply only fan belt for 15 to 25 KVA DG set complete all as specified and as directed. MAKE :- JK/Dunlop

Supply only hose set with clamps and screws suitable for DG set 70 KVA to 110 KVA complete all as specified and as directed. MAKE :- Kirloskar.

Supply only hose set with clamps and screws suitable for DG set 30 KVA to 70 KVA complete all as specified and as directed. MAKE :- Kirloskar.

Supply only hose set with clamps and screws suitable for DG set 15 KVA to 25 KVA complete all as specified and as directed. MAKE :- Kirloskar.

Supply and fix in replacement of self starter 12 volt DC including testing and commissioning complete all as specified and as directed. MAKE :- Lucas/Mico

Supply and fix in replacement of battery box of size 40cm x40cm x 20cm (Internal ) made out to shape with angle iron 40x40x 5 mm, to arrange existing batteries complete all as specified and as directed.

Supply and fix in replacement of heavy duty battery terminals brass with copper lead PVC insulated multi stranded copper conductor cable of size 25 sq.mm duly soldered for +ve and -ve, 05 mtr to 1.2 mtr long for 12/ 24 volt batteries complete all as specified and as directed.

Supply and fix thermal proof asbestos rope 12 mm dia on engine exhaust pipe including dismantling of burn out asbestos rope and arresting all leakages by welding / tightening the exhaust line including aluminium cladding and making complete fire proof, flame proof complete all as specified and as directed.

Preparation of old painted surface of the DG set installed in acuastic enclosure including base frame, radiator, fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES Nos, desriptions, location, capacity etc on DG set size of letter shall be 5 cm x 5cm of capacity 15 KVA to 110 KVA complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of Anti vibration pad as per existing size and make complete all as specified and directed by Engr-in-charge.

Descaling, Cleaning and pressure testing of radiator assembly as required including brazing etc., complete to make leak proof of capacity 15 KVA to 70 KVA complete all as specified and as directed by Engr-in-charge.

Descaling, Cleaning and pressure testing of radiator assembly as required including Brazing etc complete to make leak proof of capacity 70 KVA to 110 KVA complete all as specified and directed by Engr-in-charge.

Supply and filling / topping up engine oil multi grade as per manufacturers recommendations in engine all as specified and as directed. (Make ELF Oil/ Castrol /HP) including draining out old and burned engine oil.

Supply and fix in replacement/ topping up of coolent for radiators as approved complete all as specified and directed by Engr-in-charge. MAKE :- Bosch or equivalent

Material and labour for rewinding, varnishing & insulation & drying of AC alternator stator including transportation from site to wksp and back complete all as specified and directed.

Material and labour for winding, varnishing and insulation of rotor including trasportation from site to wksp and back complete all as specified and directed.

Supply and fix 4 pole power contactor, 415Volts, 60 Amps, including dismantling / taking down un serviceable one complete all as specified and directed by Engr-in-charge. MAKE :- L&T, Type-ML-3, Cat No-SS90721 or equivelent model of ABB/Schneider.

Supply and fix 4 pole power contactor, 415Volts, 100 to 160 Amps, including dismantling / taking down un serviceable one complete all as specified and directed by Engr-in-charge. MAKE :- L&T, Type-ML-3, Cat No-SS90721 or equivalent model of ABB/Schneider

Supply and fix SMPS 12 vots 10 Amps for 15 to 70 KVA DG set complete all as specified and directed by Engr-in-charge.

Material and labour plain cement concrete, (1:3:6), type C-2 using 40mm graded stone aggregate as in foundation for filling in, mass concrete for foundation of DG set, panel board, repairs to road cutting, drain, path etc complete all as specified and as directed.

Material and labour plain cement concrete, (1:2:4) type B-1 using 20mm graded aggregate as in reconstruction old damaged copings of DG set/ panel etc, including necessary form work complete all as specified and directed by Engr-in-charge.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq.mm 4 core with required aluminium cable lugs complete all as specified and directed by Engr-in-charge.

All as per Sl Item No. 61 here-in-before but 25 sq.mm 3.5 core complete all as specified and directed by Engr-in-charge.

All as per Sl Item No. 61 here-in-before but 50sqmm 3.5 core complete all as specified and directed by Engr-in-charge.

All as per Sl Item No. 61 here-in-before but 70sqmm 3.5 core complete all as specified and directed by Engr-in-charge.

Supply and fix of fuel injection pump assly make Stanadyne for DG set from 70 kVA to 110kVA complete all as specified and directed by Engr-in-charge.

Supply and fix of fuel injector Assly for DG set from 15 to 70 kVA complete all as specified and directed by Engr-in-charge.

Supply and fix crank shaft assly for Cummins make DG set from 70 kVA to 110kVA Model NTC 495 with bearings & seal complete all as specified and directed by Engr-in-charge.

Supply and fix Cam shaft Assly for Cummins make DG set 15 to 70 kVA model NTC 495 with bushings & Seal complete all as specified and directed by Engr-in-charge.

Supply and fix push rod for Cummins Make DG set model NTC 495 complete all as specified and directed by Engr-in-charge.

Supply and fix cylinder head gasket set for cummins make DG set Model NTC 495 complete all as specified and directed by Engr-in-charge.

Overhauling of FIP ( fuel injection pump ) at work shop including replacement of small spares required, complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 15 KVA to 70 KVA complete all as specified and directed by Engr-in-charge.

Overhauling of FIP ( fuel injection pump ) at work shop including replacement of small spares required, complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 70 KVA to 110 KVA complete all as specified and directed by Engr-in-charge.

Repair of turbo charger with CHRA, shaft & repair Kit 70 to 110 KVA DG set complete all as specified and directed by Engr-in-charge.

Repair of turbocharger with CHRA, shaft & repair Kit 15 to 70 KVA DG set complete all as specified and directed by Engr-in-charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil complete all as specified and directed by Engr-in-charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft disintegrated rock complete all as specified and directed by Engr-in-charge..

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engr-in-charge.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-charge..

Material and labour for fine stone dust for cousioning of UG cable/ at cable trenches complete all as specified and directed by Engr-in-charge.

Material and labour for brick protection with sub class 'B' brick for UG cable complete all as specified and directed by Engr-in-charge.

Material and labour for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and directed by Engr-in-charge.

Material and labour for plain cement concrete in foundations, filling and mass concrete of type D2 (1:4:8) using 40mm graded stone aggregate, complete all as specified and directed by Engr-in-charge.

Material and labour for GI tubing light grade 40mm bore, ISI marked, for cable protection complete all as specified and directed by Engr-in-charge.

Material and labour for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing strip of 25x4 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 25x4mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS complete all as specified and directed by Engr-in-charge..

Taking down chowkats and frame exc 1.5 sq.mm but n.exc 4.00 sq.mm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and as directed. .

Taking down chowkats and frame area n.exc. 1.5 sq.mm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description area exc. 1.00 sq.mm but n.exc 2.00 sq.mm each and removing form site complete all as specified and as directed.

Supply and fix pressed steel frames with MS sheet of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including material and labour for providing PCC (1:2:4) type B1, using 20mm graded stone aggregate to fill the frame & making good complete all as specified and as directed by Engr-in-Charge.

Supply and fix pressed steel frames with MS sheet size 105x60mm for doors, ventilator with single rebates including necessary fixing lugs, hinges, lock strike plate etc, including material and labour for providing PCC (1:2:4), type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified and as directed by Engr-in-Charge.

Supply and fix 35 mm thick factory made shutters of second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed.

Material and labour 35 mm thick factory made 2nd class hard wood glazed/gazsed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified.

Supply and fix galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Supply and fix 30 mm WPC door shutters decorative on both side , "RAJSHRI "brand factory made 100% Solid WPC (Wood polymer Composite) of required size comprising of virgin PVC resin of K value 57-60 (suspension Grade), Calcium carbonate and natural Fibres and Non toxic additives made from Extrusion process WPC foam sheet Single Extruded (inner) with density not less than 650 Kg/Cbm manfctured by "RAJSHRI" an ISO 9001-2015 certified Company, having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Sdge), minimum Compressive Strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance of spread flame of Class A ctegory with Property of being Termite/Bore Free,Water/Moisture Proof, Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body thtraded star headed star headed counter sunk SS Screws complete all as specified and as directed.

Supply and fix in repairs 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type including 6 mm thick teak wood lipping, as in cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

Supply and fix mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.

Supply and fix in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed.

Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing complete all as specified and as directed by Engineer-in-charge.

Supply and fix for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and as directed.

Supply and fix Aluminium handles 150 mm, fabricated type, anodised, fixed with screws, complete all as specified and as directed.

Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one guazed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average widht of aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.

Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall complete all as specified and as directed.

Material and labour for rolled mild steel framed work such as grills etc with ends of bar shouldered or revetted or forged into spikes framed guard bars including framed flat iron of any size and section to combined the windows complete all as specified and as directed by Engineer-in-Charge.

Material and labour for two coats of synthetic enamel paint over a coat of redoxide primer on newly steel surfaces including all necessary preparation over 10 cm width or girth complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

Material and labour for machine cut cudappa stone slab 20-25mm thick as in steps, jambs, pillars, window- cills, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing, polishing and rounding to edges complete all as specified and as directed.

Material and labour for black Granite 15 to 20 mm thick (table rubbed and polished ) as in steps, jambs, pillars, window-cills and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing, polishing and rounding to edges including demolition of existing slabs complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc. 0.5 sq.mm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 sq.mm in each pane complete all as specified and as directed.

Supply and fix Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebate including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fix Anodised aluminium shutters powder coated as in partition, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fix 12 mm prelaminated particle board exterior grade both side laminated complete all as specified and as directed.

Supply and fix in repairs Aluminium excruded section body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed.

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster (1:4) and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour rendering 15 mm thick in cement mortar (1:6) on fair faces of block masonry surfaces or fair faces of brick work complete all as specified and as directed.

Material and labour for preperation new plastered surface of wall and applying two coats of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete all as specified and as directed.

Material and labour for preparing new plastered and applying two coats of cement based paint (any tint) over a coat of primer on walls complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for 25 mm thick PCC (1:2:4), type B-1 using 20mm crushed stone aggregate as in leveling course complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar (1:4), complete all as specified and as directed.

Supply and fix coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick, in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. MAKE:- SOMANY / JOHNSON / KAJARIA

Material and labour Glazed ceramic colour tiles in vertifical surface 350 X 250 X 7mm / 450 x 350 x 7mm / 300x450x7mm/ mm thick with necessary borders etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick renderting backcoating in cement mortar 1:4 complete all as specified and as directed. MAKE:- SOMANY / JOHNSON / KAJARIA

Material and labour for non skid ceramic coloured tiles joint free, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.11 sq.mm but n.exe 0.18 sq.mm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. MAKE:- SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Material and labour for Non skid ceramic coloured tiles joint free 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sq.mm but not exceeding 0.18 sq.mm in skirting, over 10mm thick backing coat in CM (1:4) on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. MAKE:- SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Supply and fix in repairs stainless steel fancy type curtain rod 25 mm dia including SS brackets, decorative knobs,and including all necessary fittings such as rawl plug screws complete all as specified and as directed.

Taking down old rolling shutter and refixing the rolling shutter on same position, including having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 nos of ball bearing and MS handles including all necessary greasing & easing, replacement of unserviceable parts including one coat of synthetic enamel paint over a coat of primer complete all as specified and as directed. (NOTE :- Parts replaced shall be measured and paid seperately)

(a) Supply only MS steel sheet 1.0mm thick complete all as specified and as directed.

(b) Supply only spring suitable for rolling shutter complete all as specified and as directed.

(c) Supply only MS safety lever locks with 4 levers for rolling shutter complete all as specified and as directed.

(d) Supply only ball bearing for rolling shutter complete all as specified and as directed.

(e) Supply only MS handles 150mm in size for rolling shutter complete all as specified and as directed.

Supply and fix 5mm thick sheet glass, ordinary quality exc 0.5 sq.m in each pane for fixing in aluminium shutters complete all as specified and as directed.

VP DEVELOPERS AND CONTRACTOR