CONSTRUCTION OF COLD STORAGE, ONION STORAGE, INTEGRATED PACK HOUSE, PRE-COOLING UNIT, RIPENING CHAMBER

Amount

CONSTRUCTION OF CONSTRUCTION OF COLD STORAGE , INTEGRATED PACK HOUSE , PRE-COOLING UNIT , RIPENING CHAMBER

ITEM NO. : 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete . 1. Cold storage 547.80 Cu.mt 2. Integrated Packhouse 190.200 Cu mt 3. Ripining Chamber 105.30 Cu mt 4. Precooling Chamber 22.20 Cu mt 5. Onion Storage 225.60 Cu. mt

ITEM NO. : 2 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. 1. Cold storage 48.600 Cu.mt 2. Integrated Packhouse 16.200 Cu mt 3. Ripining Chamber 18.900 Cu mt 4. Precooling Chamber 5.400 Cu mt 5. Onion Storage 21.600 Cu. mt

ITEM NO. : 3 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.. 1. Cold storage 342.537 Cu.mt 2. Integrated Packhouse 118.929 Cu mt 3. Ripining Chamber 55.220 Cu mt 4. Precooling Chamber 11.830 Cu mt 5. Onion Storage 115.738 Cu. mt

ITEM NO. : 4 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete. 1. Cold storage 62.400 Cu.mt 2. Integrated Packhouse 21.750 Cu mt 3. Ripining Chamber 21.600 Cu mt 4. Precooling Chamber 4.200 Cu mt 5. Onion Storage 51.000 Cu. mt

ITEM NO. : 5 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 1. Cold storage 141.00 Cu.mt 2. Integrated Packhouse 48.900 Cu mt 3. Ripining Chamber 27.900 Cu mt 4. Precooling Chamber 6.000 Cu mt 5. Onion Storage 58.020 Cu. mt

ITEM NO. : 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc). 1. Cold storage 84.600 Cu.mt 2. Integrated Packhouse 29.340 Cu mt 3. Ripining Chamber 16.740 Cu mt 4. Precooling Chamber 3.600 Cu mt 5. Onion Storage 34.920 Cu. mt

ITEM NO. : 7A Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. 1. Cold storage 37.260 Cu.mt 2. Integrated Packhouse 12.670 Cu mt 3. Ripining Chamber 11.385 Cu mt 4. Precooling Chamber 3.450 Cu mt 5. Onion Storage 9.798 Cu. mt

ITEM NO. : 7B Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. 1. Cold storage 00 Cu.mt 2. Integrated Packhouse Cu mt 3. Ripining Chamber 0000 Cu mt 4. Precooling Chamber 000 Cu mt 5. Onion Storage 11.040 Cu. mt

ITEM NO. : 8 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc). 1. Cold storage 31.752 Cu.mt 2. Integrated Packhouse 10.584 Cu mt 3. Ripining Chamber 12.348 Cu mt 4. Precooling Chamber 3.528 Cu mt 5. Onion Storage 14.112 Cu. mt

ITEM NO. : 9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo25-31, PgNo 179) ( STATE DSR ) Item Spec: (Bd.F.5 Page No. 300 and B.7, Page.No. 38) & (RA NO. : 7 1. Cold storage 6.148 Cu.mt 2. Integrated Packhouse 2.049 Cu mt 3. Ripining Chamber 2.390 Cu mt 4. Precooling Chamber 0.683 Cu mt 5. Onion Storage 2.732 Cu. mt

ITEM NO. : 10 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 1. Cold storage 16.974 Cu.mt 2. Integrated Packhouse 6.106 Cu mt 3. Ripining Chamber 6.831 Cu mt 4. Precooling Chamber 2.070 Cu 5. Onion Storage 6.624 Cu. mt

ITEM NO. : 11 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete 1. Cold storage 5.215 Cu.mt 2. Integrated Packhouse 1.934 Cu mt 3. Ripining Chamber 2.212 Cu mt 4. Precooling Chamber 0.649 Cu mt 5. Onion Storage 2.351 Cu. mt

ITEM NO. : 12 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. No. : As directed by Engineer-in-charge. 1. Cold storage 4.993 Cu.mt 2. Integrated Packhouse 3.010 Cu mt 3. Ripining Chamber 2.076 Cu mt 4. Precooling Chamber 0.786 Cu mt 5. Onion Storage 2.358 Cu. mt

ITEM NO. 13 Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. 1. Cold storage 00 Cu.mt 2. Integrated Packhouse 00 Cu mt 3. Ripining Chamber 00 Cu mt 4. Precooling Chamber 00 Cu mt 5. Onion Storage 1.200 Cu. mt

ITEM NO. 14 Providing and fixing the welded jali mesh 50*25*11 gauge for 1) onino storage 340 SQMT

ITEM NO. : 1 Supplying, fabricating, erecting and fixingposition of steel structures at allelevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062- 2006. Rate shall 1. Cold storage 5.3 Cu.mt 2. Integrated Packhouse 3.1 Cu mt 3. Ripining Chamber 3 Cu mt 4. Precooling Chamber 2.8 Cu mt 5. Onion Storage 00 Cu. mt

ITEM NO. : 2 Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position.. 1. Cold storage 3.400 MT 2. Integrated Packhouse 2.500 MT 3. Ripining Chamber 1.950 MT 4. Precooling Chamber 2.000 MT 5. Onion Storage 00 MT

ITEM NO. : 3 Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.....(INo1-03 , PgNo 1) ( STATE DSR ) Item Spec: (1/1) & () 1. Cold storage 3.800 MT 2. Integrated Packhouse 2.480 MT 3. Ripining Chamber 1.750 MT 4. Precooling Chamber 1.800 MT 5. Onion Storage 00 MT

ITEM NO. : 4 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge- CORNER FLASHING ....(INo1-04 , PgNo 1) ( STATE DSR ) Item Spec: (1/1) & () 1. Cold storage 47.00 RMT 2. Integrated Packhouse 29.00 RMT 3. Ripining Chamber 32.00 RMT 4. Precooling Chamber 13 MT 5. Onion Storage 00 MT

ITEM NO. : 5 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-Gable flashing 1. Cold storage 53 rmt 2. Integrated Packhouse 23 RMT 3. Ripining Chamber 30 MTR 4. Precooling Chamber 8.600 MTR 5. Onion Storage 00 MTR

ITEM NO. : 6 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawin1. Cold storage 49 rmt 2. Integrated Packhouse 28 RMT 3. Ripining Chamber 33 MTR 4. Precooling Chamber 9.5 MTR 5. Onion Storage 00 MTR

ITEM NO. : 7 """"""""Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge / Construction Manager.""" 1. Cold storage 39 rmt 2. Integrated Packhouse 37 RMT 3. Ripining Chamber 34 MTR 4. Precooling Chamber 38 MTR 5. Onion Storage 00 MTR

ITEM NO. : 8 """"""""Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager.""" 1. Cold storage 26.900 rmt 2. Integrated Packhouse 45 RMT 3. Ripining Chamber 29 MTR 4. Precooling Chamber 32 MTR 5. Onion Storage 00 MTR

ITEM NO. : 9 Supply & Fixing of 2mm thk polycarbonate sheets as per drawing & as directed by engineer in-charge. .... 1. Cold storage 29 rmt 2. Integrated Packhouse 22 RMT 3. Ripining Chamber 22 MTR 4. Precooling Chamber 12.500 MTR 5. Onion Storage 00 MTR

ITEM NO. : 10 Turbo Ventilator 24''… 1. Cold storage 8 NO. 2. Integrated Packhouse 4 NO. 3. Ripining Chamber 0 NO. 4. Precooling Chamber 2 NO. 5. Onion Storage 00 MTR

ELECTRIFICATION

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 7-1-9 AS PER PWD CSR 23-24 1. Cold storage 129 MTR 2. Integrated Packhouse 39 Cu mt 3. Ripining Chamber 28 MTR 4. Precooling Chamber 21 MTR 5. Onion Storage 54 MTR

Making trench in Soft Soil having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR 16-1-1 AS PER PWD CSR 23-24 1. Cold storage 38 MTR 2. Integrated Packhouse 21 Cu mt 3. Ripining Chamber 16 MTR 4. Precooling Chamber 21 MTR 5. Onion Storage 21 MTR

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR 7-2-5 AS PER PWD CSR 23-24 1. Cold storage 11 MTR 2. Integrated Packhouse 4 Cu mt 3. Ripining Chamber 00 MTR 4. Precooling Chamber 3 MTR 5. Onion Storage 11 MTR

Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW 1-7-3 AS PER PWD CSR 23-24 1. Cold storage 34 MTR 2. Integrated Packhouse 13 MTR 3. Ripining Chamber 12 MTR 4. Precooling Chamber 3 MTR 5. Onion Storage 12 MTR

Supplying & erecting aviation obstruction light minimum up to 48 watt consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete as per specification No. FG-AV. 2-8-1 AS PER PWD CSR 23-24 1. Cold storage 3 MTR 2. Integrated Packhouse 0 MTR 3. Ripining Chamber 0 MTR 4. Precooling Chamber 0 MTR 5. Onion Storage 1 MTR

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP 9-1-1 AS PER PWD CSR 23-24 1. Cold storage 4 MTR 2. Integrated Packhouse 1 3. Ripining Chamber 1 4. Precooling Chamber 0 5. Onion Storage 1

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-6 AS PER PWD CSR 23-24 1. Cold storage 6 MTR 2. Integrated Packhouse 3 MTR 3. Ripining Chamber 0 MTR 4. Precooling Chamber 4 MTR 5. Onion Storage 2 MTR

Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. 6-1-6 AS PER PWD CSR 23-24 1. Cold storage 12 MTR 2. Integrated Packhouse 3 MTR 3. Ripining Chamber 1 MTR 4. Precooling Chamber 2 MTR 5. Onion Storage 4 MTR

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 7-6-1 AS PER PWD CSR 23-24 1. Cold storage 15 RMT 2. Integrated Packhouse 6 RMT 3. Ripining Chamber 10 RMT 4. Precooling Chamber 3 RMT 5. Onion Storage 15 RMT

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 7-6-2 AS PER PWD CSR 23-24 1. Cold storage 21 RMT 2. Integrated Packhouse 0 RMT 3. Ripining Chamber 14 RMT 4. Precooling Chamber 0 RMT 5. Onion Storage 21 RMT

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 7-6-10 AS PER PWD CSR 23-24 1. Cold storage 38 RMT 2. Integrated Packhouse 14 RMT 3. Ripining Chamber 21 RMT 4. Precooling Chamber 14 RMT 5. Onion Storage 38 RMT

Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No.CB-GL 7-7-2 AS PER PWD CSR 23-24 1. Cold storage 12 NUMBER 2. Integrated Packhouse 12 NUMBER 3. Ripining Chamber 12 NUMBER 4. Precooling Chamber 0 NUMBER 5. Onion Storage 13 NUMBER

Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. 1-5-7 AS PER PWD CSR 23-24 1. Cold storage 15 NUMBER 2. Integrated Packhouse 10 NUMBER 3. Ripining Chamber 15 NUMBER 4. Precooling Chamber 3 NUMBER 5. Onion Storage 15 NUMBER

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW 1-7-2 AS PER PWD CSR 23-24 1. Cold storage 14 NUMBER 2. Integrated Packhouse 4 NUMBER 3. Ripining Chamber 7 NUMBER 4. Precooling Chamber 2 NUMBER 5. Onion Storage 3 NUMBER

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/ CW 1-7-26 AS PER PWD CSR 23-24 1. Cold storage 42 NUMBER 2. Integrated Packhouse 20 NUMBER 3. Ripining Chamber 37 NUMBER 4. Precooling Chamber 6 NUMBER 5. Onion Storage 44 NUMBER

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1-3-2 AS PER PWD CSR 23-24 1. Cold storage 69 SQM 2. Integrated Packhouse 18 SQM 3. Ripining Chamber 59 AQM 4. Precooling Chamber 4 NUMBER 5. Onion Storage 71 NUMBER

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. 1-6-8 AS PER PWD CSR 23-24 1. Cold storage 16 NUMBER 2. Integrated Packhouse 6 NUMBER 3. Ripining Chamber 9 NUMBER 4. Precooling Chamber 2 NUMBER 5. Onion Storage 7 NUMBER

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC lock/wooden board with 3 years warranty. 2-2-1 AS PER PWD CSR 23-24 1. Cold storage 20 NUMBER 2. Integrated Packhouse 16 NUMBER 3. Ripining Chamber 17 NUMBER 4. Precooling Chamber 4 NUMBER 5. Onion Storage 21 NUMBER

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 5-4-13 AS PER PWD CSR 23-24 1. Cold storage 14 NUMBER 2. Integrated Packhouse 3 NUMBER 3. Ripining Chamber 3 NUMBER 4. Precooling Chamber 2 NUMBER 5. Onion Storage 4 NUMBER

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. 5-3-18 AS PER PWD CSR 23-24 1. Cold storage 5 NUMBER 2. Integrated Packhouse 0 NUMBER 3. Ripining Chamber 0 NUMBER 4. Precooling Chamber 0 NUMBER 5. Onion Storage 2 NUMBER

Supplying, erecting, testing and commissioning of 6mm (0.24in) dia PVC Installation Multi core Conference Cable (without connectors) complete as per specification no. PA-DCNCC 19-7-30 AS PER PWD CSR 23-24 1. Cold storage 20 RMT 2. Integrated Packhouse 20 RMT 3. Ripining Chamber 14 RMT 4. Precooling Chamber 7 RMT 5. Onion Storage 21 RMT

Supplying, erecting & terminating FR XLPE insulated unarmoured cable, 1100 V 1 core 120 sq. mm. aluminium conductor complete erected with lugs on wall/ trusses/ pole or laid in provided trench / pipe as per specification no. CB-LT/AL 7-1-3 AS PER PWD CSR 23-24 1. Cold storage 57 RMT 2. Integrated Packhouse 21 RMT 3. Ripining Chamber 27 RMT 4. Precooling Chamber 06 RMT 5. Onion Storage 52 RMT

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 7-1-3 AS PER PWD CSR 23-24 1. Cold storage 107 RMT 2. Integrated Packhouse 53 RMT 3. Ripining Chamber 26 RMT 4. Precooling Chamber 3 RMT 5. Onion Storage 88 RMT

ROYALTY CHARGES

Royalty for Sand

Royalty for murum and Other material

QUALITY CONTROL & LAB TESTING

ITEM NO. : 1 Cement -Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.. 1. Cold storage 1 NUMBER 2. Integrated Packhouse 1 NUMBER 3. Ripining Chamber 1 NUMBER 4. Precooling Chamber 1 NUMBER 5. Onion Storage 1 NUMBER

ITEM NO. : 2 BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity.Impact Value Crushing Value… 1. Cold storage 1 NUMBER 2. Integrated Packhouse 1 NUMBER 3. Ripining Chamber 1 NUMBER 4. Precooling Chamber 1 NUMBER 5. Onion Storage 1 NUMBER

ITEM NO. : 3 BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index.. 1. Cold storage 1 NUMBER 2. Integrated Packhouse 1 NUMBER 3. Ripining Chamber 1 NUMBER 4. Precooling Chamber 1 NUMBER 5. Onion Storage 1 NUMBER

ITEM NO. : 4 FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ), Silt & Clay Content 1. Cold storage 2 NUMBER 2. Integrated Packhouse 2 NUMBER 3. Ripining Chamber 2 NUMBER 4. Precooling Chamber 2 NUMBER 5. Onion Storage 2 NUMBER.

ITEM NO. : 5 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).. 1. Cold storage 2 NUMBER 2. Integrated Packhouse 2 NUMBER 3. Ripining Chamber 2 NUMBER 4. Precooling Chamber 2 NUMBER 5. Onion Storage 2 NUMBER

ITEM NO. : 6 CONCRETE Concrete Mix Design (With all Tests on basic materials). 1. Cold storage 1 NUMBER 2. Integrated Packhouse 1 NUMBER 3. Ripining Chamber 1 NUMBER 4. Precooling Chamber 1 NUMBER 5. Onion Storage 1 NUMBER

ITEM NO. : 7 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks)..

ITEM NO. : 8 SOIL / MURUM Liquid limit & plastic Limit. 1. Cold storage 1 NUMBER 2. Integrated Packhouse 1 NUMBER 3. Ripining Chamber 1 NUMBER 4. Precooling Chamber 1 NUMBER 5. Onion Storage 1 NUMBER

ITEM NO. : 9 SOIL / MURUM Compaction Test ( Proctor Density ).. 1. Cold storage 1 NUMBER 2. Integrated Packhouse 1 NUMBER 3. Ripining Chamber 1 NUMBER 4. Precooling Chamber 1 NUMBER 5. Onion Storage 1 NUMBER

Brick Water Absorption Compressive strength

ITEM NO. : 10 STEEL BAR TESTING Upto 16 mm (Set of 3 Bars).. 1. Cold storage 1 NUMBER 2. Integrated Packhouse 1 NUMBER 3. Ripining Chamber 1 NUMBER 4. Precooling Chamber 1 NUMBER 5. Onion Storage 1 NUMBER

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

Shrikant D. Ramekar