Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 CrAdmitted-Finance C O VOLTAS LIMITED SPARE PARTS DEPOT OLD HUTMENT COLONY NCL NIGAHI SINGRAULI M P 486884 | SINGRAULI | SINGRAULI | MADHYA PRADESH | 486884 | ₹6.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹6.9 Cr+₹9.2 L (1.36%)Admitted-Finance | ₹6.9 Cr+₹9.2 L (1.36%) | L2 | Admitted-Finance |
| 3 | L3₹8.2 Cr+₹1.4 Cr (20.3%)Admitted-Finance PLOT NO 61 BLOCK NO 7 WARD NO 1 GURGAON HARYANA 122001 | GURGAON | GURGAON | HARYANA | 122001 | ₹8.2 Cr+₹1.4 Cr (20.3%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | TRAC FUJICO AIR SYSTEMS LLP L2 | Industrial Project and Products Company L3 | UNIVERSAL MEP PROJECTS & ENGINEERING SERVICES LIMITED L1 |
|---|---|---|---|---|---|---|
| 1.00 | Centrifugal fan: The scope of work includes supply, handling, installation, testing and commissioning of upblast type centrifugal fans along with inverted duty energy efficient motor (IE3). The scope also includes erection of accessories like flexible connections at fan inlet and outlet along with woven glass cloth, base frame, vibration isolators, seismic arrestors, V-belt guard, grouting bolts, grouting etc., as per technical specification.
Capacity 85,000 CMH, St. Pressure 2000 Pa | 2 | Nos. | 27,85,497 ₹55,70,994 Lowest | 58,92,500 ₹1,17,85,000 | 29,25,161 ₹58,50,322 |
| 2.00 | Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities.
Capacity 1,500 CMH, St. Pressure 250 Pa | 1 | Nos. | 75,926 ₹75,926 | 29,375 ₹29,375 Lowest | 93,798 ₹93,798 |
| 3.00 | Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities.
Capacity 900 CMH, St. Pressure 300 Pa | 1 | Nos. | 69,730 ₹69,730 | 2,232.5 ₹2,232.5 Lowest | 92,987 ₹92,987 |
| 4.00 | Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities.
Capacity 4,800 CMH, St. Pressure 300 Pa | 1 | Nos. | 90,488 ₹90,488 | 41,125 ₹41,125 Lowest | 1,14,533 ₹1,14,533 |
| 5.00 | Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities.
Capacity 4,800 CMH, St. Pressure 100 Pa | 1 | Nos. | 87,024 ₹87,024 | 37,600 ₹37,600 Lowest | 96,158 ₹96,158 |
| 6.00 | Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), ect. of following capacities.
1500 CMH, St. Pressure 50 Pa | 6 | Nos. | 23,755 ₹1,42,530 | 23,500 ₹1,41,000 Lowest | 58,282 ₹3,49,692 |
| 7.00 | Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), ect. of following capacities.
6400 CMH, St. Pressure 50 Pa | 2 | Nos. | 28,558 ₹57,116 | 27,025 ₹54,050 Lowest | 74,305 ₹1,48,610 |
| 8.00 | Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), ect. of following capacities.
900 CMH, St. Pressure 50 Pa | 1 | Nos. | 23,755 ₹23,755 | 14,100 ₹14,100 Lowest | 57,471 ₹57,471 |
| 9.00 | Pre filters: The scope of work includes design, supply, transportation, handling, installation, testing and commissioning of HDPE Pre filters with 90% efficiency down to 10 micron, filter size 610 x 610 x 150 mm (1700 CMH per Filter) as per technical specification. | 110 | Nos. | 4,856 ₹5,34,160 Lowest | 10,457.5 ₹11,50,325 | 7,218 ₹7,93,980 |
| 10.00 | Fine filters: The scope of work includes transportation, handling, installation, testing and commissioning of HDPE Fine filters with 99% efficiency down to 5 micron, Filter size 610 x 610 x 292 mm (1700 CMH per Filter) as per technical specification. | 20 | Nos. | 8,168 ₹1,63,360 Lowest | 18,330 ₹3,66,600 | 11,353 ₹2,27,060 |
Tender Value
₹8.8 Cr
EMD Value
₹17.5 L
Closing Date
20 Jul 2022, 5:00 pmClosed
Project Director
Office of the Project Director, FRFCF - NRB, Kalpakkam
Supply, installation, testing and commissioning of air conditioning and ventilation System for Core Subassembly Plant of FRFCF, Kalpakkam
2022_BARC_693887_1
BARCF/FRFCF/ME/TR/1/2022/017
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
365 days
FRFCF, Kalpakkam
Please refer the document
8 documents required · 8 mandatory
₹0
₹17.5 L
FRFCF, Kalpakkam
20 Oct 2022
10 Jun 2022
27 Jul 2022
10 Jun 2022
20 Jul 2022
10 Jun 2022
10 Jun 2022 - 25 Jun 2022
28 Jun 2022
Amount
Centrifugal fan: The scope of work includes supply, handling, installation, testing and commissioning of upblast type centrifugal fans along with inverted duty energy efficient motor (IE3). The scope also includes erection of accessories like flexible connections at fan inlet and outlet along with woven glass cloth, base frame, vibration isolators, seismic arrestors, V-belt guard, grouting bolts, grouting etc., as per technical specification. Capacity 85,000 CMH, St. Pressure 2000 Pa
Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities. Capacity 1,500 CMH, St. Pressure 250 Pa
Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities. Capacity 900 CMH, St. Pressure 300 Pa
Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities. Capacity 4,800 CMH, St. Pressure 300 Pa
Tube axial fan: The scope of work includes design, supply, handling, installation, testing and commissioning of duct mounted Tube Axial Fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), etc. of following capacities. Capacity 4,800 CMH, St. Pressure 100 Pa
Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), ect. of following capacities. 1500 CMH, St. Pressure 50 Pa
Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), ect. of following capacities. 6400 CMH, St. Pressure 50 Pa
Propeller fan: The scope of work includes design, supply, handling, installation, testing and commissioning of wall mounted propeller fans with CS casing (inside and outside epoxy painted), die cast aluminum alloy aerofoil blade impeller, EN8 shaft, energy efficient motor (IE2), ect. of following capacities. 900 CMH, St. Pressure 50 Pa
Pre filters: The scope of work includes design, supply, transportation, handling, installation, testing and commissioning of HDPE Pre filters with 90% efficiency down to 10 micron, filter size 610 x 610 x 150 mm (1700 CMH per Filter) as per technical specification.
Fine filters: The scope of work includes transportation, handling, installation, testing and commissioning of HDPE Fine filters with 99% efficiency down to 5 micron, Filter size 610 x 610 x 292 mm (1700 CMH per Filter) as per technical specification.
HEPA filters: The scope of work includes design, supply, transportation, handling, installation, testing and commissioning of micro glass fiber HEPA filters with 99.97 % efficiency down to 0.3 micron, Filter size 610 x 610 x 292 mm (1700 CMH per Filter) as per technical specification.
Cooling coil: Design, supply, installation, testing and commissioning of cooling coil banks and PVC moisture eliminator. The chilled water cooling coil shall be of copper tube, 8 row deep & 2-pass (preferable), 11-13 FPI aluminum fins and with carbonsteel pipe headers. The size of coil bank shall be designed according to space available in filter bank room as per specification and drawings. Cooling coil capacity 100 TR, air flow 85,000 CMH
GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, necessary reinforcement, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 31) 22 Gauge
GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, necessary reinforcement, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 31) 20 Gauge
GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, necessary reinforcement, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 31) 18 Gauge
GI duct: Supply, fabrication, erection and testing of supply air duct with GI material, complying to IS: 277, Class IV, Grade 275 GSM, necessary reinforcement, supply air collars, vanes, splitters, fasteners, etc., as per technical specification and duct layout drawings. Duct construction shall be as per SMACNA standard. (Note: Necessary duct support and reinforcement structural material (MS) are covered under item no. 31) 16 Gauge
SS304L duct: Supply, fabrication, erection and testing of exhaust air duct with AISI SS304L, complying to ASTM A 240 complete with pickling & passivation, TIG welding, etc., as per technical specification and drawings. The duct weld joints shall be 100 % DP tested. Duct welding and construction shall be as per technical specification. (Note: Necessary duct supporting structural material, reinforcement are covered under item no.31 and SS fasteners, poison plate covered in item no.32 SS 3mm sheet thickness
Thermal insulation: Supply and installation of closed cell Nitrile rubber (class“O”) thermal insulation duly laminated with aluminum foil of mat finish on supply air duct. Insulation shall be sticked by applying two coats of cold setting adhesive as per technical specification.
Acoustic insulation:Supply and installation of 15 mm thick acoustic insulation of elasometric foam based synthetic rubber, open cell structure, self adhesive coating and covered with protective polytheylene foil to be laid inside the duct plenum. The acoustic insulation shall be suitable for 12 to 30 deg.C operating temperature, fire retandant “1” class, minimum density of 100 kg/cu.m resistant to chemical and micro-organisam, dust and fiber free and sound absorbtion as per class –D.
Supply and installation of double deflection type supply air grill with 16G extruded aluminium powder coated material, adjustable and locking type aluminium volume control damper. The louvers shall be adjustable in horizontal and vertical positions. Louvers portion shall be removable type for adjusting volume control damper.
Supply and installation of 16 G extruded aluminium powder coated return air grills without volume control damper.
Fabrication, supply and installation of double deflection type exhaust air grill with SS 304L material, 1.5 mm thick, adjustable and locking type SS 304L volume control damper.The louvers shall be adjustable in horizontal and vertical directions. The louvers portion shall be removable type for adjusting volume control damper.
Diffuser: Supply and installation of square shape ceiling diffusers, 16 G thick extruded aluminium powder coated material, along with removable core & anti smudge ring type volume control dampers.
Volume Control damper: Supply and installation of multi opposed blade type manual volume control damper, rectangular/circular shape, 10 G GSS casing & 16 G GSS blades, shaft, bearing etc locking arrangement and OPEN/CLOSE indication etc., as per technical specification.
Filter bank manual isolation damper: The scope of work includes supply, handling, erection, testing and commissioning of single louver, butterfly type, manual gear operated leak tight carbon steel isolation dampers for outlet of supply filter bank room as per technical specification. (Note: Necessary MS structural material for supporting dampers is covered under item no. 31) 2500 x 1900 x 150 mm
Filter bank manual isolation damper: The scope of work includes supply, handling and erection , testing and commissioning of single louver, butterfly type, manual gear operated leak tight Stainless Steel isolation dampers for inlet and outlet of exhaust filter bank room as per technical specification. (Note: Necessary MS structural material for supporting dampers is covered under item no. 31 & 32) 1000 x 600 x 150 mm
Filter bank manual isolation damper: The scope of work includes supply, handling and erection , testing and commissioning of single louver, butterfly type, manual gear operated leak tight Stainless Steel isolation dampers as per technical specification. (Note: Necessary MS structural material for supporting dampers is covered under item no. 31 & 32 ) 2000 x 1700 x 150 mm
Erection of pneumatic damper: Transportation, handling and erection testing and commissioning of pneumatically operated isolation damper at fan inlet and outlet. The supply of dampers are in the scope of department. Dia 1750 mm
Erection of pneumatic damper: Transportation, handling and erection testing and commissioning of pneumatically operated isolation damper at fan inlet and outlet. The supply of dampers are in the scope of department. Size 1600 mm x 1200 mm
Fire damper: Supply, installation, testing and commissioning of fusible link fire damper as per technical specification. The damper shall meet the fire resistance rating of 90 minutes as per UL 555 testing standards and certified by CBRI. The damper frame shall be made of GI material.
MS Supports: Supply of materials, fabrication and erection of MS structural steel as per IS 2062 Gr.B with linkable mill test certificate for supporting ducts, plenums, isolation dampers, pipes, equipment supports, stiffners etc., including one coat of epoxy primer and two coat of epoxy painting. The structural material shall be in the form of angle, channel, beam, plate, pipe, rod, fasteners, clamp etc.
SS304 Supports: Supply of materials, fabrication and erection of SS304 structural steel in the form of angle, channel, beam, plate, 3mm flats/sheet, rod, fasteners, clamp etc as per ASTMA240 with original linkable mill test certificate for supporting cooling coil. 3mm flats/sheets shall be provided whereever CS to SS contact is there like supports and stiffners.
Pre-insulated chilled water piping: Supply, fabrication, erection, testing and commissioning of factory made pre-insulated ERW carbon steel piping with spiral aluminium and PUF insulation as per technical specification. The piping shall be complete with necessary ASTM pipe fittings like elbows (short and long), Tees, reducers, flanges, fasteners, etc., as per drawings. Scope also includes field insulation of joints with PUF. Pre-insulated CS ERW pipes 200 mm dia with aluminium outer jacket
Pre-insulated chilled water piping: Supply, fabrication, erection, testing and commissioning of factory made pre-insulated ERW carbon steel piping with spiral aluminium and PUF insulation as per technical specification. The piping shall be complete with necessary ASTM pipe fittings like elbows (short and long), Tees, reducers, flanges, fasteners, etc., as per drawings. Scope also includes field insulation of joints with PUF. Pre-insulated CS ERW pipes 125 mm dia with aluminium outer jacket.
Pre-insulated chilled water piping: Supply, fabrication, erection, testing and commissioning of factory made pre-insulated ERW carbon steel piping with spiral aluminium and PUF insulation as per technical specification. The piping shall be complete with necessary ASTM pipe fittings like elbows (short and long), Tees, reducers, flanges, fasteners, etc., as per drawings. Scope also includes field insulation of joints with PUF. Pre-insulated CS ERW pipes 100 mm dia with aluminium outer jacket.
Pre-insulated chilled water piping: Supply, fabrication, erection, testing and commissioning of factory made pre-insulated ERW carbon steel piping with spiral aluminium and PUF insulation as per technical specification. The piping shall be complete with necessary ASTM pipe fittings like elbows (short and long), Tees, reducers, flanges, fasteners, etc., as per drawings. Scope also includes field insulation of joints with PUF. Pre-insulated CS ERW pipes 80 mm dia with aluminium outer jacket.
Pre-insulated chilled water piping: Supply, fabrication, erection, testing and commissioning of factory made Supply, fabrication, erection, testing and commissioning of factory made pre-insulated ERW carbon steel piping with spiral aluminium and PUF insulation as per technical specification. The piping shall be complete with necessary ASTM pipe fittings like elbows (short and long), Tees, reducers, flanges, fasteners, etc., as per drawings. Scope also includes field insulation of joints with PUF. Pre-insulated CS ERW pipes 50 mm dia with aluminium outer jacket.
Pre-insulated chilled water piping: Supply, fabrication, erection, testing and commissioning of factory made pre-insulated ERW carbon steel piping with spiral aluminium and PUF insulation as per technical specification. The piping shall be complete with necessary ASTM pipe fittings like elbows (short and long), Tees, reducers, flanges, fasteners, etc., as per drawings. Scope also includes field insulation of joints with PUF. Pre-insulated CS ERW pipes 25 mm dia with aluminium outer jacket.
Pre-insulated chilled water piping: Supply, fabrication, erection, testing and commissioning of factory made pre-insulated ERW carbon steel piping with spiral aluminium and PUF insulation as per technical specification. The piping shall be complete with necessary ASTM pipe fittings like elbows (short and long), Tees, reducers, flanges, fasteners, etc., as per drawings. Scope also includes field insulation of joints with PUF. Pre-insulated CS ERW pipes 15 mm dia with aluminium outer jacket.
Supply, installation, testing and commissioning of slimseal, wafer type butterfly valve of cast iron body, integrally moulded with black nitrile rubber, nylon coated SG iron disc, flangeless design with flow control lever of following sizes as per IS 13095/ BS 5155. Scope also includes insulation of valves with PUF and Aluminium cladding. 200 mm dia
Supply, installation, testing and commissioning of slimseal, wafer type butterfly valve of cast iron body, integrally moulded with black nitrile rubber, nylon coated SG iron disc, flangeless design with flow control lever of following sizes as per IS 13095/ BS 5155. Scope also includes insulation of valves with PUF and Aluminium cladding. 125 mm dia
Supply, installation, testing and commissioning of slimseal, wafer type butterfly valve of cast iron body, integrally moulded with black nitrile rubber, nylon coated SG iron disc, flangeless design with flow control lever of following sizes as per IS 13095/ BS 5155. Scope also includes insulation of valves with PUF and Aluminium cladding. 80 mm dia
Supply, installation, testing and commissioning of Globe valves as per BS 1873 as per drawings and technical specification. 125 mm dia
Supply, installation, testing and commissioning of Globe valves as per BS 1873 as per drawings and technical specification. 100 mm dia
Supply, installation, testing and commissioning of 200 mm dia balancing valves as per technical specification.
Supply, installation, testing and commissioning of SS ball valves as per technical specification. 25mm
Supply, installation, testing and commissioning of SS ball valves as per technical specification. 15 mm dia
Supply, installation, testing and commissioning of gate valve as per technical specification. 15mm
Supply, installation, testing and commissioning of gate valve as per technical specification. 25mm
Supply, installation, testing and commissioning of 125 mm pneumatically operated control valves as per technical specification.
Anchor Fasteners: Supply and fixing of Galvanized Iron anchor fasteners along with bolts and washers for fixing the base plate and providing pipe supports where ever embedded plates are not available / provided. Support base plates shall be fabricated from plates detailed in item no 31 & 32. The anchor bolt shall be seismic resistant. Preferred Make: Hilti/ Fischer. 10 x 100mm
Anchor Fasteners: Supply and fixing of Galvanized Iron anchor fasteners along with bolts and washers for fixing the base plate and providing pipe supports where ever embedded plates are not available / provided. Support base plates shall be fabricated from plates detailed in item no 31 & 32. The anchor bolt shall be seismic resistant. Preferred Make: Hilti/ Fischer. 12 x 120mm
Anchor Fasteners: Supply and fixing of Galvanized Iron anchor fasteners along with bolts and washers for fixing the base plate and providing pipe supports where ever embedded plates are not available / provided. Support base plates shall be fabricated from plates detailed in item no 31 & 32. The anchor bolt shall be seismic resistant. Preferred Make: Hilti/ Fischer. 16 x 150mm
Opening and enclosing of brick wall: Opening of brick wall of average thickness of 150 mm to 300mm for routing of pipe & ducts and enclosing the same with proper PVC sleeves, providing brick filling and cement mixture at various locations.
Opening and enclosing of concrete wall: Opening of concrete wall of average thickness of 150 mm to 300mm for routing of pipe & ducts and enclosing the same with proper PVC sleeves, providing brick filling and cement mixture at various locations.
Differential Pressure gauge: Supply and installation of dial type differential pressure gauge-Magnehelic type complete with SS tubings, compression fittings, mounting brackets etc. as per technical specification. Across Pre-filter & fine filter bank, range 0- 50 mm WC
Differential Pressure gauge: Supply and installation of dial type differential pressure gauge-Magnehelic type complete with SS tubings, compression fittings, mounting brackets etc.as per technical specification. Across HEPA filter bank, range 0- 125 mm WC
Supply and installation of dial, bourdon type pressure gauge with SS body, SS syphon and 15 mm dia SS ball valve. (Range 0-10 kg/sq.cm) to be mounted on chilled water pipelines as per technical specification.
Supply and installation of dial type SS temperature gauge with SS thermowell (Range 0 to 30° C) to be mounted on following chilled water pipelines as per technical specification. Insertion length : 90mm
Supply and installation of dial type SS temperature gauge with SS thermowell (Range 0 to 30° C) to be mounted on following chilled water pipelines as per technical specification. Insertion length : 180mm
RTD with thermowell: Supply and installation of 3 wire, Pt100 Immersion type temperature sensor with 4-20 mA transmitter output for measuring supply air temperature inside duct complete with duct flanges, SS thermowell, screws and compression fittings. Range: 0 to 40°C, insertion length min. 260 mm as per technical specification.
Supply and installation of panel mount type temperature indicating controller with 4-20 mA output for actuating 2-way valve as per technical specification.
Supply, installation, testing and commissioning of 2-way modulating globe valve with electronic actuator with position feedback and 4-20 mA current input for chilled water flow control. Pipe size - 100 mm dia, 55 cu.m/h as per technical specification.
Supply, installation, testing and commissioning of Water flow transmitter with 4-20 mA output signal, orifice flow element with flanges, flow transmitter, flow indicator with mounting arrangements, etc., for Line size - 125 mm dia, 55 cu.m/h as per technical specification.
Supply and installation of Annubar (averaging type pitot tube) sensor with transmitter, 4-20 mA current output for measuring air flow through supply duct with complete accessories like duct flanges, screws, compression fittings etc. The calibration of every Annubar shall be M/s. FCRI, Palakkad. Range- 0 to 18,000 CMH, Duct size 650 x 800
supply and installation of Digital panel meters with flow and totaliser for air flow indication as per technical specification.
Duct static pressure sensor with controller: Supply and installation of duct static pressure sensor with 4-20 mA output and controller with relay output to be mounted on the supply air plenum for controlling and regulating the air flow through fan VFD speed. Range 0 to 250 mm WC as per technical specification.
Differential pressure indicator to indicate the room pressure with 4-20 mA for remote communications as per technical specification.
Instrument cable - Supply and installation of stranded annealed tinned copper conductor, XLPE insulated, PVC inner sheath, round armoured GI wire, FRLS-PVC outer sheath,1100 V grade cable. 1 Pair x 0.75 sq mm signal Cable (Individual & overall Shielded, armoured)
Instrument cable - Supply and installation of stranded annealed tinned copper conductor, XLPE insulated, PVC inner sheath, round armoured GI wire, FRLS-PVC outer sheath,1100 V grade cable. 2 Pair X 0.75 sq mm Signal Cable (Individual & overall Shielded, armoured)
Instrument cable - Supply and installation of stranded annealed tinned copper conductor, XLPE insulated, PVC inner sheath, round armoured GI wire, FRLS-PVC outer sheath,1100 V grade cable. 10 Pair X 1 sq mm Signal cable
Control cable :Supply and installation of -multi-strand copper conductor, XLPE insulated, PVC inner sheath, round armoured GI wire, FRLS-PVC outer sheath,1100 V grade cable. 2 Core x 1.0 sq.mm
Control cable :Supply and installation of -multi-strand copper conductor, XLPE insulated, PVC inner sheath, round armoured GI wire, FRLS-PVC outer sheath,1100 V grade cable. 4 Core x 1.0 sq.mm
Control cable :Supply and installation of -multi-strand copper conductor, XLPE insulated, PVC inner sheath, round armoured GI wire, FRLS-PVC outer sheath,1100 V grade cable. 7 Core x 1.0 sq.mm
Junction boxes (25 Terminals) (Material: 2.5 mm thick cast aluminium, IP -55, provided with 6 nos SS cable glands per JB)
Junction boxes (50 Terminals) (Material: 2.5 mm thick cast aluminium, IP -55, provided with 6 nos SS cable glands per JB)
Cable tray: Perforated 2.5 mm thick GI cable tray with cover (minimum 70 µ coating thickness) including all accessories and MS mounting support. Size 100 mm x 50 mm x 10 mm
Cable tray: Perforated 2.5 mm thick GI cable tray with cover (minimum 70 µ coating thickness) including all accessories and MS mounting support. Size 150 mm x 50 mm x 10 mm
Cable tray: Perforated 2.5 mm thick GI cable tray with cover (minimum 70 µ coating thickness) including all accessories and MS mounting support. Size 200 mm x 50 mm x 10 mm
Earthing system: 25 mm x 6 mm bare copper flat
Earthing system: 8 SWG insulated Copper wire
Earthing system: 16 sq. mm. Earthing Copper Cable
Supply, installation and commissioning of differential pressure switch (Non-indicating type)
Supply, installation and commissioning of capacitance type pressure transmitter Range 0 - 0.005 Kg/cm2 & (-)0.005 - 0 Kg/cm2
Supply, installation and commissioning of pressure switch, Range (-) 0.021 - 0 kg/cm2 (g) at suction Blower
Supply, installation and commissioning of Flow gauge : Differential pressure guage (flow) Range 0 - 135 m3/hr for chilled water flow as per technical specification.
Supply, installation and commissioning of Flow gauge : Rotameter type flow guage, Range 0 - 140 m3/hr for chilled water flow as per technical specification.
Supply, installation and commissioning of instrument air manifolds with 4 TAPS
Supply, installation and commissioning of 50T junction boxes with required accessories
Supply, installation and commissioning of signal cable including Double compression (Nickel Plated Brass) Cable Glands at both ends. 1P x 0.75 Sq mm (individual pair shielded)
Supply, installation and commissioning of signal cable including Double compression (Nickel Plated Brass) Cable Glands at both ends. 6P x 0.75 Sq mm (individual pair shielded & overall shielded)
Supply, installation and commissioning of signal cable including Double compression (Nickel Plated Brass) Cable Glands at both ends. 1T x 0.75 Sq mm (individual triad shielded)
Supply, installation and commissioning of signal cable including Double compression (Nickel Plated Brass) Cable Glands at both ends. 6T x 0.75 Sq mm (individual triad shielded & overall shielded)
Supply, installation and commissioning of communication cables: Optical Fiber Communication Cables between PLC Cabinet & Remote I/Os
Supply, installation and commissioning of communication cables: CAT-6 Communication Cables for interfacing Operator station, Engineering station & Printer with the PLC
Supply, installation and commissioning of control cables : 2C x 1.0 Sq mm (overall shielded)
Supply, installation and commissioning of control cables : 4C x 1.0 Sq mm (overall shielded)
Supply, installation and commissioning of control cables : 7C x 1.0 Sq mm (overall shielded)
Supply, installation and commissioning of control cables : 17C x 1.0 Sq mm (overall shielded)
Supply, installation and commissioning of control cables : 24C x 1.0 Sq mm (overall shielded)
1” Rigid Conduit (mild steel; hot dipped galvanised) including conduit fittings like coupling, elbows, clamps etc.
1” Flexible Conduit (mild steel; hot dipped galvanised) including conduit fittings like coupling, elbows, clamps etc.
Impulse Tubes:1/4” OD X 0.049" thick SS 316 annealed, cold drawn seamless tubes, 600# class
1/4” SS ferrule type male connector
1/4” SS ferrule type Female connector
1/4” SS ferrule type Union
1/4” 3 way SS Gauge Cock
5 valve SS manifold
SS Compression fittings for all gauges and sensors
TRAC FUJICO AIR SYSTEMS LLP
Industrial Project and Products Company
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.61 MB
Drawings.pdf
Additional Documents • 3.05 MB
TechnicalBidForms.xls
Additional Documents • 0.12 MB
BOQ_730156.xls
BOQ • 0.35 MB
TenderDocument.pdf.pdf
Tender Documents • 2.62 MB
GCC2014.pdf
Additional Documents • 1.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .