Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.6 L
EMD Value
₹6,800
Closing Date
4 Nov 2023, 10:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
jyoti
Repairing of Grave yard Highmast poles at ward No 23 of Hosa Yellapur
DMA/2023-24/EL/WORK_INDENT5308
DMA/2023-24/EL/WORK_INDENT5308
Reserved
Electrical
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
8 documents required · 8 mandatory
₹500
₹6,800
26 Oct 2023
26 Oct 2023
29 Oct 2023
Repairing of Grave yard Highmast poles at ward No 23 of Hosa Yellapur
8 meters Octagonal pole Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door ope...
Earth Work Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per dra...
Base Concerete Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as ...
TMT Steel Supplying ,fitting and placing TMT Fe 550 Reinforcement in foundation complete as per drawing and technical specifications (.PWD SR 2021-22 Vol No.03 P.No.71 SI No. 9.3 1st quarter revised r...
Centering Work Centering, shuttering, formwork for foundation,sub structure of cross drainages. 5% of the finished concrete item rate ( appendix 01 of vol 01, Sl no 02 of pg no 115) Basic Rs- 311.55 5...
Concerete Providing and laying in position Reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma...
GI pipe bracket Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, u...
Flexible Multicore Cable Supplying and drawing Flexible Multicore Cable
manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation s...
Copper Wire Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with ...
LED floodlight Supply of LED floodlight luminaire with pressure die cast
aluminium housing body for optimal thermal dissipation.
Lamp compartment comprising of anti glare clear diffuser
with Injection...
Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps PWD SR 2019-20 Page No.25 Item code5.7.2
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circu...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circu...
contactor switch Supply and fixing of 4pole power contactor with NO/NC
contacts on existing wood/panel board using necessary
bolts, nuts, washers and wiring etc., complete with AC-3
Rating and as per ...
contactor switch Supply and fixing of 4pole power contactor with NO/NC
contacts on existing wood/panel board using necessary
bolts, nuts, washers and wiring etc., complete with AC-3
Rating and as per ...
Hylum Sheet Supplying and fixing hylum plastic sheet 3mm thick with
necessary nitches for fixing switches, regulators etc., and
fixing on existing wood or metal box using N.F. screws
Angle Iron Supplying and fixing angle iron frame work fabricated out of
M.S. angle iron. and M.S. flat … with bolts, washers etc.,
and painted with 2 coats of red oxide and then two coats of
MS Box Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, e...
PVC Pipe Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the s...
Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable item no. 31.05) 2.5 to 25 Sqmm page no. ...
Digging Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger B...
XXXIV)Transformer grounding e)GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs item no. XXXIV.a) p...
UG Cable 1.1 kV, XLPE or Heat resistant PVC
insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...
XXXIV)Transformer grounding e)GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick
with bolts nuts, GI Strips and washers complete
Minimum Weight of GI Pipe: 7.3 Kgs item no. XXXIV.a) p...
Class A Pipe 449 )GI Pipe B - Class as per IS-123949.Item No 49.04) GI Pipe - 40 mm Dia Page No16 Hescom SR 2021-22
Pot Head 35)Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Item No 35.01 )Up to 4C x 50 Sqmm Page No10 Hescom SR 2021-22
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5308.doc
Tender Document • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .