SUPPLY CALIBRATION GAS CYLINDERS

CALIBRATION GAS LESS THAN OR EQUAL TO 20% CH4 + BALANCE N2 OR A RGON. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOUL D SUBMIT CERTIFICATE FOR CYLINDER AND VALVES AS PER STATUTORY REQU IREMENT OF GOVT.OF INDIA. CYLINDERS ARE OF APPROX. 10 LITRE CAPAC ITY AND GAS COMPRESSRED TO A PRESSURE OF 130 TO 140 ATMS.

CALIBRATION GAS LESS THAN OR EQUAL TO 10%CH4+BAL.N2 OR ARGON. ALL CYLI NDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOULD SUBMIT CERTIFI CATE FOR CYLINDER AND VALVES AS PER STATUTORY REQUIREMENT OF GOVT.O F INDIA. CYLINDERS ARE OF APPROX. 10 LITRE WATER CAPAC ITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 ATMS.

CALIBRATION GAS LESS THAN OR EQUAL TO 1% CH4 + BALANCE N2 OR A RGON. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOUL D SUBMIT CERTIFICATE FOR CYLINDER AND VALVES AS PER STATUTORY REQU IIREMENT OF GOVT.OF INDIA. CYLINDERS ARE OF APPROX. 10 LI TRES WATER CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 1 40 ATMS.

CALIBRATION GAS WITH COMPOSITION : 2% CH4, BALANCE N2 OR ARGON, COMPOSITION TOLERANCE: MINUS 10%, CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOULD SUBMIT CERTIFICATE FOR CYLINDER AND VALVES AS PER STATUTORY REQUIREMENT OF GOVT.OF INDIA., CYLINDERS SHALL BE OF 10 LITRES WATER CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 ATMS., ACTUAL GAS COMPOSITION CERTIFICATE SHALL BE PROVIDED WITH THE SUPPLY.

CALIBRATION GAS MORE THAN OR EQUAL TO 50% H2 + BALANCE N2 OR ARGON. AL L CYLINDERS SHALL BE OF ALLOY STEEL AND THE SUPPLIER SHOULD SUBMIT CER TIFICATE FOR CYLINDERS AND VALVES AS PER STATUTORY REQUIREMENT OF GO VT.OF INDIA. CYLINDERS ARE OF APPROX. 10 LITRE WATER CAPAC ITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 ATMS.

CALIBRATION GAS LESS THAN_OR EQUAL TO 80% H2 + BALANCE N2 OR A RGON. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOULD SUBM IT CERTIFICATE FOR CYLINDERS AND VALVES AS PER STATUTORY REQUIRE MENT OF GOVT.OF INDIA. CYLINDERS ARE OF APPROX. 10 LITRE WATER CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 ATMS.

CALIBRATION GAS LESS THAN OR EQUAL TO 1% CO + BALANCE N2 OR A RGON. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOUL D SUBMIT CERTIFICATES FOR CYLINDERS AND VALVES AS PER STATUTORY REQ UIREMENT OF GOVT.OF INDIA. CYLINDERS ARE OF APPROX 10 LITRE WATE R CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 ATMS.

CALIBRATION GAS LESS THAN OR EQUAL TO 0.5% CO2 + BALANCE N2 OR A RGON. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOULD SUBM IT CERTIFICATE FOR CYLINDERS AND VALVES AS PER STATUTORY REUIREM ENT OF GOVT.OLF INDIA. CYLINDERS ARE OF APPROX 10 LITRES WATER CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 ATMS.

SPAN GAS CYLINDER FOR AMMONIA ANALYSER 15AR01 AMMONIA:9.8% BALANCE NIT ROGEN,CAPACITY:10 LITRES WATER CAPACITY, CYLINDER PRESSURE:38 KG/CM2,A LLOY STEEL CYLINDER WITH CERTIFICATES FOR CYLINDER AND VALVES AS PER T HE STATUTORY REQUIREMENT OF GOVERNMENT OF INDIA.

SPAN GAS CYLINDER FO HGRU AMMONIA ANALYZER,CONCETRATION LESS THAN OR E QUAL TO 300PPM AMMONIA,BALANCED NITROGEN OR ORGON,CAPICITY:10LITERS WA TER CAPACITY,CYLINDER PR.:130 TO 140KG/CM2,ALLOY STEEL CYLINDER WITH C ERTIFICATE FOR CYLINDER & VALVE AS PER STATUTORY REQUIREMENT FROM GVT. OF INDIA.

CALIBRATION GAS CYLINDER CONTAINING 5% OXYGEN PLUS BALANCE NITROGEN OR ARGON WITH FEMALE CONNECTOR. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOUL DSUBMIT CERTIFICATE FOR CYLINDER AND VALVES AS PER STATUTORY REQUIREMENT OF GOVT OF INDIA. CYLINDERS SHALL BE OF APPROXIMATELY 10 LITRES OF WATER CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 KG PER SQ.CM.(ATMS).

CALIBRATION GAS CYLINDER CONTAINING 2% OXYGEN PLUS BALANCE NITROGEN OR ARGON WITH FEMALE CONNECTOR. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOULD SUBMIT CERTIFICATE FOR CYLINDERS AND VALVES AS PER STATUTORY REQUIREMENT OF GOVT.INDIA. CYLINDERS SHALL BE OF APPROXIMATELY 10 LITRES OF WATER CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 KG PER SQ.CM. (ATMS).

CALIBRATION GAS 100 N2. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOULD SUBMIT CERTIFICATE FOR CYLINDER AND VALVES AS PER STATUTORY REQUIREMENT OF GOVT.OF INDIA. CYLINDERS ARE OF APPROX. 1 0 LITRE WATER CAPACITY COMPRESSED TO A PRESSURE OF 130 TO 140 A TMS.

CALIBRATION GAS WITH 0.57 SPECIFIC GRAVITY (FOR CALIBR-ATION OF SP.GRA VITY ANALYSER. ANALYSER IS USED TO MEASURE SP.GRAVITY OF NATURAL GAS. COMPOSTION:0.01% O2,0.86% N2, 1.98% C2H4, 0.62% C3H8 & 96.53% CH4 . CYL.SHALL BE OF A.S. AND SUPPLIER SHOULD SUBMIT CERT. FOR CYL.& VAL VES AS PER STATUTORY REQUIREMENT OF GOVT.O INDIA. CYLS.ARE OF APPROX 10 LTR.WATER CAPACITY &

CALIBRATION GAS WITH FOLLOWING COMPOSITION : OXYGEN 0.5 % AND BALANCE:NITROGEN , COMPOSITION TOLERANCE: +/- 10%, STABILITY 12 MONTHS, CYLINDERS SHALL BE OF CARBON STEEL AND ALLOY STEEL CONNECTION SHALL BE 5/8" BULL NOSE (F) LH TYPE AS PER IS 3224, ACTUAL GAS COMPOSITION CERTIFICATE SHALL BE PROVIDED CYLINDERS SHALL BE OF 10 LITRES WATER CAPACITY AND GAS COMPRESSED TO AT PRESSURE OF 140 TO 160 KG/CM2G., WITH THE SUPPLY. CYLINDER BASIS: RETURNABLE

CALIBRATION GAS WITH FOLLOWING COMPOSITION : OXYGEN 8 % AND BALANCE:NITROGEN , COMPOSITION TOLERANCE: +/- 10%, STABILITY 12 MONTHS, CYLINDERS SHALL BE OF CARBON STEEL AND ALLOY STEEL CONNECTION SHALL BE 5/8" BULL NOSE (F) LH TYPE AS PER IS 3224, ACTUAL GAS COMPOSITION CERTIFICATE SHALL BE PROVIDED CYLINDERS SHALL BE OF 10 LITRES WATER CAPACITY AND GAS COMPRESSED TO AT PRESSURE OF 140 TO 160 KG/CM2G., WITH THE SUPPLY. CYLINDER BASIS: RETURNABLE

GAS CYLINDER FOR HGRU AMMONIA ANALYZER,CONSTRATION LESS THAN OR EQUAL TO 50PPM AMMONIA,BALANCE NITROGEN OR ARGON,CAPACITY:10 LITRES OF WATER ,CYLINDER PRESSURE:130 TO 140 KG/CM2,ALLOY STEEL CYLINDER WITH CERTIFI CATE FOR CYLINDER & VALVE AS PER STATUTARY REQUIRED OF GOVERNMENT OF I NDIA.

CALIBRATION GAS CYLINDER CONTAINING 8% OXYGEN PLUS BALANCE NITROGEN OR ARGON WITH FEMALE CONNECTOR. ALL CYLINDERS SHALL BE OF ALLOY STEEL AND SUPPLIER SHOULD SUBMIT CERTIFICATE FOR CYLINDER AND VALVES AS PER STATUTORY REQUIREMENT OF GOVT.OF INDIA. CYLINDERS SHALL BE OF APPROXIMATELY 10 LITRES OF WATER CAPACITY AND GAS COMPRESSED TO A PRESSURE OF 130 TO 140 KG PER SQ.CM.(ATMS).

N2 calibration cylinder-Zero Gas for SOx NOx Analyzer calibration MOC of Valve-Brass,Nitrogen-UHP-99.9997% in 10 liters cylinder Gas Pressure/Volume/Wt-130 KG/CM2,Valve Type-RH,Cylinder Type- 10 CS With 2 set of calibration and tracibility certificates

Calibration cylinder-Span Gas for SOx NOx Analyzer calibration MOC of Valve-Brass Nickel Coated,Gas Pressure/Volume/Wt-130 KG/CM2 Valve Type-LH,Composition reqd-SO2-100 PPM,NO2-150 PPM,CO-100 PPM CO2-20%,N2 balance in 10 lts cylinder with 2 set of calibration and Tracability certificate, Cylinder type-10 AL

Calibration cylinder-Span Gas for O2 Analyzer calibration Calibration Gas Cylinder containing 0.998% Oxygen Plus Balance Argon Or Nitrogen with female connector in 10 lts cylinder with 2 set of Calibration and tracibility certificate,Pressure-130KG/CM2 Cylinder type-Alloy Steel

LAB ACC-CALIBRATION GAS-PRO CO2-11%, AR-0.4%, N2-1.0%, CH4-11.0%, CO- 10.0%, BALANCE - H2 CAPACITY = 0.5 LIT OF WATER PRESSURE = MIN 20 KG/CM2

LAB ACC-CALIBRATION GAS-CO2 PURITY H2-1.0%O2-0.3%,N2-2.0%,CH4-0.5% ,CO-0.3%,CO2-BALANCE

LAB ACC-CALIBRATION GAS-HGRU Ar=8%, H2=25%, CH4=18%, BALANCE= N2 CAPACITY = 0.5 LIT OF WATER PRESSURE = MIN 20 KG/CM2

LAB ACC-CALIBRATION GAS-NG-PRE-BED CO2-0.2%,AIR-0.5%,C2H6-4%,C3H8- 2.0%,IC4-0.2%,NC4-0.2% IC5-0.2%,NC5-0.2%,IC6-0.2%,NC6-0.2%,CH4-BALANCE CAPACITY = 0.5 LIT OF WATER PRESSURE = MIN 20 KG/CM2

ZERO AIR -H2O MAXIMUM 5 PPM, CO2 MAXIMUM 2.5 PPM,CO-NIL, TOTAL HC-3 PP M. CYLINDER PRESSURE: 140-150 KG/CM2, 47 LITRES WATER CAPACITY.

CAPCITY 0.5 LT PRESSURE-20 KG/ CM2 COMPOSITION IN % N2 - 0.4, CH4 - 0.2, O2 - 0.1, H2 - 2.0 ,CO - BALANCE

CAPCITY 0.5 LT PRESSURE-20KG/CM2 COMPOSITION IN % N2-0.3, CH4-0.1, O2 - 0.1, H2 - 65.5, CO2 - 7.0, CO-BALANCE

CALIBRATION GAS CANISTER. CERTIFICATE VALIDITY ONE YEAR CAPCITY 0.5 LT PRESSURE-20 KG/ CM2 COMPOSITION : O2 - 500 PPM, N2 - BALANCE .

CALIBRATION GAS CANISTER - 4 CAPCITY 0.5 LT PRESSURE-20 KG/ CM2 COMPOSITION IN % N2 - 0.3, CH4 - 0.1, O2 - 0.1, CO - 28 H2 - BALANCE

HIGH PURITY AMMONIA GAS HAVING FOLLOWING COMPOSITION A) AMMONIA : 99.5 % (MINIMUM) B) MOISTURE : 0.5 % (MAXIMUM) C) OIL : LESS THAN 10 PPM NOTE : AMMONIA GAS SHALL BE FILLED IN CYLINDER AND NET WEIGHT SHALL BE 50 KGS.

CALIBRATION GAS CYLINDER FOR NOX ANALYSER IN AIR MONITORING STATION. CONCENTRATION:10PPM NOX, BALANCED NITRGEN, ALLOY STEEL CYLINDER OF 10 LITERS WATER CAPACITY, CYLINDER PRESSURE:130-140 KG/CM2, WITH CERTIFIC ATE FOR CYLINDER & VALVE AS PER STATUTARY REQUIREMENT OF GOVT. OF INDIA.

CALIBRATION GAS CYLINDER FOR SO2 ANALYSER IN AIR MONITORING STATION. C ONCENTRATION:10PPM SO2, BALANCED NITRGEN, ALLOY STEEL CYLINDER OF 10 L ITERS WATER CAPACITY, CYLINDER PRESSURE:130-140 KG/CM2, WITH CERTIFICA TE FOR CYLINDER & VALVE AS PER STATUTARY REQUIREMENT OF GOVT. OF INDIA .

CALIBRATION GAS CYLINDER FOR NH3 ANALYSER IN AIR MONITORING STATIN, CO NCENTRATION : 10 PPM NH3, BALANCED NITRGEN, ALLOY STEEL CYLINDER OF 10 LITERS WATER CAPACITY, CYLINDER PRESSURE : 130-140 KG/CM2, WITH CERT IFICATE FOR CYLINDER & VALVE AS PER STATUTARY REQUIREMENT OF GOVT. OF INDIA.

N2 CAL.GAS CYLINDER FOR ZERO CHECKING 99.999% N2 BALANCE NITROGEN, CAPACITY:10 LITRES OF WATER ,CYLINDER PRESSURE:130 TO 140KG/CM2,ALLOY STEEL CYLINDER WITH CERTIFICATE FOR CYLINDER & VALVE AS PER STATUTORY REQUIREMENT OF GOVERNMENT OF INDIA

SO2/NO CAL.GAS CYLINDER FOR SPAN CHECKING SO2-245 mg/m3 and NO-159 mg/m3, BALANCE NITROGEN,CAPACITY:10 LITRES OF WATER, CYLINDER PRESSURE:130 TO 140KG/CM2,ALLOY STEEL CYLINDER WITH CERTIFICATE FOR CYLINDER & VALVE AS PER STATUTORY REQUIREMENT OF GOVERNMENT OFINDIA

SO2 CYLINDER OF CAPACITY 10 LITRES, CONTAINING 10.00KG OF GAS,INDUSTRI AL/COMMERCIAL GRADE OF PURITY:99.5% MINIMUM.

CHEMTRON SCIENCE LABORARTORIES PVT. LTD.

SUPER INDUSTRIAL GASES