Special Repair works for the heavy rainfall affected Existing Rural Police Station at Ketty in the Nilgiris District.

Amount

1.3: Earth work excavation in Soft disintegrated rock (including refilling) a) 0 to 2M

31 : Weathering couse

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

51.2 : Supply and fixing of HDPE water tank 750 lit capacity with ISI mark

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

Electrical arrangements 72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76: Supplying and laying of 8SWG GI wire

78. Earthing Station IS3043 (Type I)

ANNEXURE I 8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) with admixture a. In Ground floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 :Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).(using crushed stone sand)

32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

38.8 :Providing two coat of Exterior Emulsion PAINT including primer

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

52.4: Supply and fixing of 20 mm dia ASTM pipe (fully consceled in walls)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

57.1.1. : S & F of E.W.C (White) 500mm with "P" or "S" TRAP (using crushed stone sand) with double flapped seat & seat cover

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

60.1 : PVC Nahani trap (4way/2way) (using crushed stone sand)

361 : Concrete Designer Tiles flooring (using crushed stone sand)

361.5.1. : Supply and Laying of Ivory Vitrified tile Flooring in C.M 1:3 20mm Thick (using crushed stone sand)

448.2: Supply and fixing 32mm dia PVC Tee with end cap

799 : Painting the walls with two coat of Oil Bound Distember

ANNEXURE II A1: Dismantling the RCC by manual / by using deploying machineries and clearing away, carefully stacking materials useful for re-use without affecting the adjacent structures including the cost of required tools and plants and scaffolding,etc., all complete.

A2: Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris away from the site etc., all complete. a) walls under 3m Height

A3: Dismantling, the existing Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including cost of clearing away and carefully stacking materials useful for re-use etc., all complete.

A4: thorough scrapping of plastered surface as where required and as directed by the departmental officers.

A5: Removing the damaged broken door/window /ventilators including the removal of frames, hinges, fastenings and shutters form the existing structure and stacking the same carefully for reuse

A6: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose

A7: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for fan point (Open wiring)

A8: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch board itself.(Open wiring)

A9: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(Open wiring)

A10: Run off main with 2 wires of 2.5 Sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990,1.1 kv grade cable (open wiring)

A11: UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.

A12: UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.

A13: Supply and fixing of 9 watts LED bulb

A14: Supply and fixing of 4' 18 watts LED Tube Light

A15: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A16: Supply and fixing of 12W LED bulb

A17: Supply and fixing of 25W LED street light

A18: Providing and Applying of Solar reflective Paint, acrylic polymer based elastometric water proofing coating having Solar Reflective Index more than 90 % as per ASTM E 903, specific Gravity of 1.30+/-0.10. For Existing Surface: The Surface Preparation including Jet wash , the Cracks are filled wherever required below 3mm of crack and application of three coats of paint to form 1mm thickness

siva constructions (BID ID -1184870)