Interior Furnishing and other work for State Disaster Command and Control Center at Various District Collectorate-Vidisha, Rajgarh, Harda, Betul, Damoh, Narsinghpur, Katni, Mandla, Dindori, Balaghat, Seoni and Chhindwada.(M.P.)

Amount

USG Boral Ceiling System with 7 mm thick white sand gypsum ceiling tile & unilife T 24 mm T-Grid- 600x 600 mm module this includes unilife t 24mm grid wall angle of 20mm x 22mmx 0.40 mm shall be screw fixed to brick wall/ partition with the help to approved screws at 600 mm centers,. Then suspending UNILIFE T 24 mm main T grid of 24 mm x 32 mm x 0.27 mm of length 3000 mm is hung with USGBORAL adjustable level clips 85x31x0.60mm & 4 mm diameter GI rod which are connected to USG boral soffit cleat 37 mm x 27mmx 1.6mm and 8 mm dia 40 mm long fasteners @ 1200 mm centers or as approved from rcc slab. The cross T of 24mmx27mmx0.27mm of 1200mm length shall be interlocked between main T Grid at 600 mm center to form 1200 x 600 mm modules. 600x600mm modules to be formed by click fitting cross T OF 24 MM X 27 MM OF 600 mm length centrally between the 1200 mm cross T's Then 7 mm thick USG BORAL white sand gypsum ceiling panel with Foil backing having size 595x595 shall be placed into the above grid of size 600 x 600 mm

Providing and Applying ultra tech texture paint required placed. compete as per direction of engineer-in-charge.

Providing and fixing painting work made out of canvass by acrylic /oil paint colours as per design with framing work etc. complete in all respect as per direction given by Engineer in charge.

Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge.

Providing & fixing of imported 3D wall paper with high resolution including all fitting with wastage(Spin Decor/ marshell / Green)

Providing and fixing of zebra wooden chick blinds /roller blinds/ vertical blind of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/WINDOW TECH )

Providing and supply of wall clock as per approved design

Size:- Length:1200mm, Width: 600mm, Height: 750m. C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections, having provision for wire management. Top made of 25mm thick Pre-laminated Particle Board. PVC Edge beading of 2mm thick by Through Feed Machine. Dotted embossed cable Duct and Perforated steel modesty panel on visitor’s side. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. With Single Drawer Key Board Tray & CPU Trolley..

Size: Length:- 1200mm, Width:-600mm, Height:-750 mm. C–Frame & tubular cold rolled close annealed steel structure. Fabrication involves only MIG/TIG & Spot welding . Top made of 18mm thick Pre-laminated Particle Board. PVC Edge beading of 2mm thick by Through Feed Machine. Electrical Cable Tray made of 0.6mm thk MS cold rolled close annealed sheet press formed 3 fold 115mm ht. Provision to run cable in legs. Drum Type Leveller. Metal keyboard tray and removable CPU stand. with Single Drawer on telescopic channel. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. With 8 mm thick Frosted Glass partition of Size 600X300. Fitted with D Buttons. Desk Based Partition With Cable Duct- Size:- Length:1200mm, thickness:65mm, Height:300mm,Frame made of cold rolled close annealed Steel Structure. Use only MIG/TIG & Spot welding for fabrication. Provision for Cable and switches and tile - Soft board / White Board / Pre-laminated Particle Board. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.

The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centredia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/ BIFMA X7.1standards (HAWORTH/ HERMANMILLER/ GODREJ/FEATHERLITE/HOF. MAKE )

The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric.The foam is assemble dover a 12mm thick hot pressed plywood. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be(W)-46cm,(H)-55cm & size of seat shall be(W)-48cmx(D)- 44.0cm.Armrest is fixed. The arm top is made of soft moulded PU. The mechanism of chair shall have following features: 360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95+/-5mm.The pedestal shall be made of nylon. it shall be fitted with 5 nost win wheel castor. The size of the pedestal shall be 65.0 +/-1cm pitch-centre-dia (70.0+/-1.0cm with castors).The twin wheel castors shall be injection moulded in PP. Over all dimensions of Chair shall be, Width of Chair- 70.0cm ,Depth of Chair-70.0cm as measured from pedestal below. Height from ground- min 95to max 104cm.Seat height-min45.0cm to max54.0cm. Dimensions tolerance/variations shall be within+/-1cm. Chair tested as per ANSI / BIFMA x 5.1standards (HAWORTH/ HERMANMILLER/ GODREJ/ FEATHERLITE/ HOF.MAKE )

Side table 1200 x 500 x 700mm – P/F table of specified size to be made up of 18mm BWP Ply as per drawing using approved make hardware Hettich, Ebco, Haffle all exterior surface to be finished in post form laminate and inner surface with 0.8mm laminate all exposed edges should be finished with 2mm thick PVC beading. The cost is inclusive of all material and labour etc complete in all respect as per drawing and direction given by engineer in charge.

Providing & Fixing of 24-Port Data Switch of [Managed Layer-2 with 2-Giga Ports (10/100/1000) ] Make: D-link/Cisco

Providing and fixing of storage unit (laminate finish 450mm wide) – providing and fixing at site file/ storage cabinet made up of 18mm BWP Ply with post form shutters as per drawing all shelves and partitions to be made up of 18mm BWP Ply and back side shall have 8mm ply with off white laminate of 0.8mm thickness all hardware hinges, lock shall be of make Hettic, Ebco, Haffle All exposed Edges to be finished with 2mm PVC beading. The cost is inclusive of all materials accessories SS Handles, lock, sHinges, shoe etc complete in all respect as per drawing and direction given by Engineer in charge. (NOTE:- The bidder shall quote his own rates for Item No. 1 to 14 of Item rate Part.)

Bidder Name

Amount

ABBOTTSONS IMPEX PVT LTD(GSTN-23AAECA7527R1Z9)