Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.7 L
Closing Date
14 Oct 2026, 5:00 pm
Dy General Manager (PnC)
Procurement and Contract Wing, CPS-I Khairi Distt. Chamba (HP) 176325.
Repair of sill beam, side plates, gate roller and clamp plates of under-sluice gates of Dam CPS-1.
2026_NHPC_927418_1
NH/CPS-1/PnC/W-1664/2026-27/58 Dated 23/09/2026
Open Tender
Miscellaneous Works
Works
120 days
CHAMERA POWER STATION-1
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
NHPC LIMITED
₹3.7 L
Yes
23 Sept 2026
23 Sept 2026
19 Oct 2026
23 Sept 2026
14 Oct 2026
23 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of 25x150x5550mm SS plate grade A 276 Type 304L and Machining it to make 20x150x5550mm as per drawing number 107-22-1A. | 4 | Nos | 1 | ₹4 |
| 2 | Fixing of above item no. 1 at sill beam location including alignment, welding, stiffening, grinding complete in all respect and testing as per instructions of Engineer In charge. The above also includes removal of existing damaged sill beam plate and its stacking at Dam top as per instructions. | 4 | Job | 1 | ₹4 |
| 3 | Supply of 18x100x5600mm SS plate grade A 276 Type 304L and Machining it to make it 12x100x5600mm as per drawing number 107-22-2A&B. | 8 | Nos | 1 | ₹8 |
| 4 | Fixing of above item no. 3 at left and right side lateral guide location including alingment, welding, stiffening, grinding complete in all respect and testing as per instructions of Engineer In charge. The above also includes removal of existing damaged lateral guide plates and its stacking at Dam top as per instructions. | 4 | Job | 1 | ₹4 |
| 5 | Supply of Steel Liner Plate (MS) of size 18mm x 700mm x 2800mm | 4 | Nos | 1 | ₹4 |
| 6 | Fixing of above item no. 5 including alignment, welding, grinding complete in all respect as per instructions of Engineer In charge. | 4 | Job | 1 | ₹4 |
| 7 | Removing of shaft pin after dismantling of the gate roller assembly and repairing it with Weld worn-out areas of the shaft pin accurately in its housing and perform fusion welding using E309L stainless steel electrodes, then machining (i.e., Turning in a lathe machine to its original dimensions) as per the drawing. | 32 | Job | 1 | ₹32 |
| 8 | Supply of taper roller bearings 32044X bearings of approved make (FAG) as per the Technical specification of taper roller bearing.
Specifications:-
Taper Roller Bearing Single row no- 32044X, Inside Dia 220 MM, Outside Dia 340 MM & Width Dia 76 MM as per Drawing of FAG make having follwing properties Dynamic load rating: 1060 KN and above Static Load rating: 1640 KN and above Fatigue Load rating: 204KN and above Cage: Steel Cage | 46 | Nos | 1 | ₹46 |
| 9 | Supply of Water-tightening seals of make: KLOZURE GARLOCK, Model no. 53X4012.
Specifications:-
KLOZURE GARLOCK OIL SEAL NO 53X4012 (Water tightness seal) Inside Dia 10.5'' (266.70MM) Outside Dia 12'' (304.8MM) Width Dia 0.75'' (19.05MM) Case Material: Cold Rolled Steel (CRS) Spring Material: 302SS | 46 | Nos | 1 | ₹46 |
| 10 | Supply of spacers & side plates.
Each set comprises the following:
1 No. Inner Bush Spacer (SS), (SS 304)
1 No. Outer Side Spacer (SS), (SS 304)
1 No. Inner Side Spacer (SS), (SS 304)
1 No. Pin Spacer (SS), (SS 304)
2 No. Roller Side Plate (Keeper Plate-MS), A36 MIN | 24 | Set | 1 | ₹24 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
BOQ_974609.xls
BOQ • 0.32 MB
Tender.pdf
Tender Documents • 7.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .