REPAIR/REPLACEMENT TO TILING PLASTERING SANITARY WORK AND OTHER MISC BR WORKS IN OTM ACCN OF 505 ABW UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

Demolition of plain cement concrete unreinforced of any description and in any position not otherwise specially provided complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick ready mix plaster (make ultratech readiplast/birla aerocon RMP/ ACC suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick ready mix plaster (Make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth including taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 5mm thick ready mix plaster (Make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP) on ceilling surfaces finished even and smooth including taking down all as specified and directed by GE.

M&L 15mm thick ready mix plaster (Make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth all as specified and directed by GE.

M&L 15mm thick ready mix plaster (Make ultratech readiplast/birla aerocon RMP/ ACC suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth all as specified and directed by GE.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 1mm thick wall care putty and chalk whiting on plastered surfaces preparatory to distempering complete all as specified and directed.

M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over one coat of 1mm thick wall care putty up to 15 mtr height complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade up to 15 mtr height cmplete all as specified and directed.

M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489 ; 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface up to 15 mtr height complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or grith complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of old steel surfaces and appliyng two coats of synthetic enamel paint or aluminium paint as approved by EIC up to 15 mtr height cmplete complete all as specified and directed.

M&L WPC acoustic wall panelling of approved colour for indoor/outdoor wall 100% nontoxic, non feraldelyers, water proof, termite proof, anti-UV using necessary stainless steel clip/fixing arrangement including corner patti or moulded beading or corners of same materials including dismantling of pannels complete all as specified and directed.

Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (glass fibre with reinforced gypsum) false ceiling tiles of size 595mm x 595mm of approved texture, having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15mm x 32mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15mm x 32mm of length 600mm to form grid module of size 600mm x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and shape level adjuster of size 85mm x 25mm x 2mm. galvanised iron perimeter wall angle of size 24mm x 24mm x 0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters without taking off shutters from the frames complete all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters without taking off shutters from the frames complete all as specified and directed.

Taking down door shutters of any description exc 1sqm & n.exc 2 Sqm each complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F providing and fixing factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer?In- Charge. Note:- Stainless steel butt hinges and necessary stainless steel screws shall be paid separately complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, without sash bars chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a)

S&F stainless steel, wire cloth 0.45mm nominal dia of wire, and average width of aperature 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F 30mm thick flush shutter factory made soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid for separately. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F providing and fixing factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer?In- Charge. Note:- stainless steel butt hinges and necessary stainless steel screws shall be paid separately complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window area exceeding 2.0 sqm three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). window profile with hollow section with multi chamber. Frame 88mm x 52mm, sliding sash 42mm x 67mm. Sliding mesh sash 42mm x 57mm sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware touch lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. net opening will be measured lor payment purpose.

S&F factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 48mm x 40mm (tolerance ± 1 mm), with wall thickness 2.0mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19mm X 19mm and 1mm (± 0.1 mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

S&F roller blinds premium korean fabric/zebra roller blinds or as approved to windows/opening including top and bottom frame/rail complete all as specified and directed

S&F in repairs WPC Jaali 18mm thick any design and colour as directed by Engineer -in -charge

S&F in repairs frame work of WPC size of frame 75mm x 50mm all as per direction of Engr-in-charge.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed

S&F in repairs 100mm size butt hinges, extruded aluminum alloy with galvanised Stainless steel ISI marked complete all as specified and directed

S&F aluminium handles 150mm size cast type, anodised complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adehessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2mm dia of wire and total aperture 75mm, thickness of gunite n.exc 25mm thick (average thickness) using cement mortar 1:3 with OPC 43 grade cement mixed with polycrete admixture @ 2% by wight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper geometrics in cement mortar 1:4 to match with the existing surface as inside and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffoldings, shuttering necessary chased to brick work or RCC members at any height upto four storey buildings including removing of small trees shrubs etc all as specified. Note:- Steel welded mesh to be welded with the existing reinforcement. The cost of welded mesh is to be welded with the existing re-inforcement is deemed to be included in the quoted rate.

Providing and fixing 4mm thick aluminium composite panel (ACP) exterior grade (0.5mm PVDF coated aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/brick column/ wall/ fascia's/ M.S. section/ aluminium section structure/ dead walls/under side sky light upto all height in required colour/pattern & panel size as (area of panel shall not more than 0.60Sqm as per drawing fixed on aluminium extruded standard tubular section of size 38mm x 25mm x 1.6mm of approved make (jindal/hindalco/indalco) conforming to IS; 733 and IS; 1285, fixed at 600m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or panels including filling the joints with weather silicon sealant of dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap, primer/ gasket/ foam/ scaffolding/ cluding 10mm dia backer rod, The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/ gasket/ foam/ scaffolding/ aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all necessary tools and plants, scaffolding and as per manufacturer's technical specifications, including dismantling of old sheet complete and as per the direction of the Engr-in-Charge (surface area of aluminium composite panel shall be measured for payment.

M&L for granite 18mm to 20mm thick colour as approved (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 including moulding and polishing the edges complete all as specified and directed

M&L for granite 18mm to 20mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding and polishing the edges etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified and directed

M&L double charged vitrified tiles 8mm to 10mm thick square /rectangular granite or marble texture polished, area of each tiles not exceeding 0.36 sqm, in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed.

All as per the description of srl item No 47 above but in vertical surface as skirting, dado and risers to steps over and including10mm thick rendering/backing coat in cement mortar 1:4.

M&L 3D exterior designer coloured matt finished wall tiles 300mm x 600mm design as approved over 10mm thick rough finished rendering in cement mortar 1:4 including taking down cement plaster and removal from site complete all as specified and directed

M&L for vitrified coloured tiles shade as approved 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, as in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over screed bed or bedding layers of mortars 15mm thick in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

All as per the description of srl item No 50 above but as in vertical surfaces such as skirting/ dado over and including 10mm thick rendering in CM 1:4 compelete.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed

M&L glazed ceramic coloured tiles as in vertical surface area of each tille exc 0.12 but not exc 0.18 sqm each tile set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as specified & directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repairs sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and directed

S&F in repairs CP stainless steel connection pipe 600mm premium quality for geyser and WHB complete all as specified and directed

S&F in repairs water closet squatting pan ``orissa pattern`` 580mm x 440mm, white with integral foot rests including fixing of flushing cistern, connection to trap, anti syphonage pipe etc complete all as specified including provision of lime concrete bedding.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity including PVC float valves, PVC connection and out let pipes complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repairs 15mm bore bib cock with long thread, chromium plated , with long body, wall flange screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified.

S&F in reapirs angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified ISI marked.

S&F in repairs bib tap long body fancy type chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F in repairs CP mixer pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, mixing 'Hot' or 'Cold' water with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm complete all as specified and directed

S&F in repairs CP hand spray (health faucet with 1.5m long easy flexiable tube in secured or sorrounded with chrome finish flexible coil with wall hook) complete all as specified and directed. Cat part No ALD-CHR-583 of make Jaquar or equivalent etc complete all as specified and directed

Taking down 15mm dia steel tubing and connection complete all as specified and directed

Taking down 20mm dia steel tubing and connection complete all as specified and directed

S&F of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, tee, MTA/MBTA,FTA/FBTA, tank adaptor, union, etc suitable for 15mm bore bath fittings). Note:- Length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

S&L of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, tee, MTA/MBTA, FTA/FBTA, tank adaptor, union, etc). Note:- Length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed

Dismantling of brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar complete all as specified and directed

Removal of mud from top roof slab, any thickness, including plastering and leeping whether full thickness removed or only a part thereof.

M&L for cement concrete 1:2:4 type B0 using 12.50mm graded curshed stone aggregate as in levelling coarse over RCC slab to bring the desired slope up to six stories bldg, using water proofing compound as per manufacturer's instructions complete all as specified & directed. Note:- Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed

M&L for APP based polymeric membrane with mineral granules finish minimum weighting 3 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints complete all as specified and directed

S&F in repair 2 in 1 angle valve 15mm CP fancy pattern type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified and as directed

S&F 12mm thick plain or frosted toughned glass for door shutters of size area exc 1.50 sqm but n.exc 3.00 sqm including floor door spring, stainless steel handle 600mm long and 3 Nos hinges, door seal, necessary arrangements required for fixing it in position complete as specified and directed.

The new hut furnitures (BID ID -3435745)

Paradise Interior (BID ID -3428583)

VEDIT ENTERPRISES (BID ID -3428692)

Rohan Construction Company (BID ID -3422416)

m/s lovely cool air (BID ID -3428798)

YUVAAN CONSTRUCTION (BID ID -3429339)