Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
27 Oct 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer MID Anantnag
Executive Engineer MID Anantnag
Supply installation, testing, and commissioning of 10 cusec 15 Meter head Horizontal pumping unit along with suction and delivery pipelines, and allied works at LIS Allochibagh
2026_IFC_328347_1
e-NIT No. 30 of 2026-27
Open Tender
Machineries/ Mechanical Engg Items
Turn-key
120 days
Allochibagh
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Executive engineer, MID anantnag
₹30,000
Yes
15 Oct 2026
15 Oct 2026
27 Oct 2026
15 Oct 2026
27 Oct 2026
15 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Manufacture, Supply, Installation, Testing & Commissioning of 10 Cusec capacity, 15 Mtr. dynamic head Horizontal Centrifugal split casing type Pumping Unit as per the following specifications:
A) PUMP SPECIFICATIONS:
1. Model: To be quoted
2. Make: Kirloskar/ WILO Mather & Platt/ WPIL / KSB/ Sintech/ As per EOI
3. Type: Horizontal Centrifugal Split Casing
4. Discharge: 10 Cusec
5. Dynamic head: 15 Mtr.
6. NPSHa: 3.5 Mtr.
7. NPSHr: To be quoted
8. Pump input at duty point: To be quoted
9. Sealing arrangement: Gland packed
10. Pump efficiency at duty point (without negative tolerance): Not less than 75%
11. Speed: 1000 RPM or less
12. Diameter of suction: to be quoted
13. Diameter of delivery: to be quoted
14. Material of Impeller: Bronze LTB II IS: 318 / CF8M
15. Material of Shaft: SS 410
16. Material of shaft sleeves: SS 410
17. Material of wearing rings: Bronze LTB II IS; 318/CF8M
18. Material of pump casing: CI FG 260 IS: 210 / Cast Steel WCB
19. Material of Base frame: MS
20. Coupling, Coupling guard, Foundation bolts etc.: As per relevant IS
B) MOTOR SPECIFICATIONS:
1. Rating: not less than 75 HP at maximum discharge
2. Make: KEC/ABB/Siemens/CGL/GEC
3. Type: Horizontal foot mounted squirrel cage induction motor
4. Speed: 1000 RPM or less (Sync)
5. Enclosure: TEFC
6. Voltage: 415+ 10% V, 3-Phase AC
7. Frequency: 50+ 3% Hz
8. Type of Duty: S1
9. Class of insulation: F
10. Efficiency: not less than 90%; Efficiency class: IE2 or higher
C)The pumping unit is to be fitted to the existing 300 mm x 300 mm (Suction x Delivery) lines. The job includes necessary preparation of foundation block and modifications to the existing suction & delivery piping’s as per site requirement. The job also shall include providing and fitting of additional pipe (6 Mtrs approx.) length/ flanges (compatible with the existing line) required for fitment of the new pumping unit. The job also includes connecting the pumping unit to the existing priming pumping system manifold. The job also includes: Providing of Ring Spanner Set of Size (12/13 to 30/32) (01 complete set), Cutting Pliers, 8 inch: (01 No), Screw Driver 8 inch (01 No). | 1 | Complete job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.56 MB
BOQ_1111536.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .