REPAIR/MAINTENANCE OF STREET/BUILDING SECURITY LIGHT AT ZONE A AND REPAIR/MAINT OF FIRE ALARM DETECTION SYSTEM AND ALLIED WORKS AT ZONE A AND SSPL UNDER GE I RnD DELHI

Amount

Servicing of conventional as well as addresseable Detectors (heat/smoke) by cleaning and checking all connections upto the main control panel, including testing after servicing complete all as specified and directed.

S&F in replacement multi sensor (combination of photoelectric and ROR heat detector) including testing complete after servicing complete all as specified and directed.

S&F in replacement Heat detector with base fixed temp complete all as specified and directed.

S&F in replacement intelligent addressable micro processor based smoke/ multi sensor detector with automatic environmental compensation suitable for operation in any environment without need of adjustment of sensitivity at panel. The detector shall have multicolor LED, which shall blink Green in case of normal, Red in case of fire and AMBER in case of any fault condition. The contractor shall provide base for detector and box for mounting complete all as specified and directed. Note :- The contractor shall provide base for detector and box for mounting and their cost shall deemed to be included in quoted rates.

S&F in replacement intelligent addressable micro processor based Heat detector with automatic environmental compensation suitable for operation in any environment without need of adjustment of sensitivity at panel. The detector shall have multicolor LED, which shall blink Green in case of normal, Red in case of fire and AMBER in case of any fault condition complete all as specified and directed. Note :- The contractor shall provide base for detector and box for mounting their cost shall be deemed to be included in quoted rates.

S&F in replacement battery 12 volts 32 AH maint free, complete all as specified and directed.

S&F in replacement battery 12 volts 7 AH maint free, complete all as specified and directed.

S&F in replacement of Zonal Card as per matching to existing complete all as specified and directed.

M&L for repair of Zonal Card complete all as specified and directed.

S&F in replacement control card as per matching to existing complete all as specified and directed.

M&L for repair of control card complete all as specified and directed.

S&F in replacement manual call points ABS Body complete all as specified and directed.

S&F in replacement manual call points intelligent addressable complete along with mounting box. Manual Call Point shall be used to manually trigger a fire alarm. MCP shall contain short circuit isolator and an alarm LED. The alarm shall triggered by smashing the glasscomplete all as specified and directed.

S&F in replacement of breakable glass of manual call points complete all as specified and directed.

S&F input cum output module for intelligent addressable fire alarm control panel with protection class of input output module shall be IP with case complete all as specified and directed.

S&F in replacement addressable loop card as per matching to existingcomplete all as specified and directed.

M&L for repair of addressable loop card complete all as specified and directed.

S&F in replacement hooter medium intensity with 4" speaker complete all as specified and directed.

S&F in replacement of addressable hooter of sound level between 80 to 100 dB at 24 VDC for indoor / oudoor use suitable for direct connection with loop complete with all accessories. complete all as specified and directed.

S&F In replacement response indicator with plastic body complete all as specified and directed.

S&F in replacement cable FRLS PVC insulated copper conductor 2x1.5 Sqmm in existing conduit including taking down old UNSV wire complete all as specified and directed.

S&F in replacement stove enameled steel conduit 20mm dia complete with accessories fixed on wall / ceiling complete all as specified and directed.

Supply only in replacement siren hooter of capacity 1 mile including testing complete complete all as specified and directed.

Supply only in replacement of power card as per matching to existing complete all as specified and directed.

M&L for repair of power card complete all as specified and directed.

S&F in replacement of Auto dialar for Microprocessor based panel. complete all as specified and directed.

Supply, install, testing and commissioning in replacement of Microprocessor based Master/slave fire alarm cum detection control panel upto 10 zones with power supply and battery charger alongwith maint free batteries. (Make : Exide), complete all as specified and directed.

Supply, install, testing and commissioning in replacement of Microprocessor based Master/slave fire alarm cum detection control panel upto 08 zones with power supply and battery charger alongwith maint free batteries. complete all as specified and directed. Make : Exide or equivalent as approved by GE.

Supply, install, testing and commissioning in replacement of Repeater /Mimic panel 06 zones with power supply including all necessary accessories, complete all as specified and directed. Make : Agni/Edward/Cooper

Taking down of Old unserviceable point wiring any type for light, fan, power etc including unserviceable switch,socket, regulator light fitting and ceiling rose etc of any make complete including making good disturbed surfaces of walls ,floors roof etc, complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in and including PVC concealed conduit including cutting chasing for conduits and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular metal flush box 2mm thick surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and as directed.

All as per item Ser No. 31 above but using cable size 1.5 Sqmm for 1 Nos 05 Amps Socket outlet independent with terminal boxes, Modular fittings including acessories as modular metal flush box 2mm thick ,surface cover plate with frame, metal flush box, complete all as specified and as dierected.

All as per item Ser No. 31 above but using cable size 1.5 Sqmm for 05 Amps Socket outlet independent but below the switch board with terminal boxes, Modular fittings including acessories as modular surface cover plate with frame, metal flush box, complete all as specified and as dierected.

All as per item Ser No. 31 above but using cable size 1.5 Sqmm for 1 Nos 05 Amps Socket outlet on the same board with other switches, complete all as specified and as dierected.

All as per srl item No 31 here-in- before but using cable size 2.5 Sqmm for 15 Amps Socket outlet terminal boxes for Modular switches including acessories as modular metal flush box 2mm thick ,surface cover plate with frame, metal flush box with 2.5 sqmm earth wire, complete all as specified and as dierected.

S&F in replacement of Glow Plug Top 16 Amps with Indicator, complete all as specified and directed.

S&F in replacement sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and directed.

S&F modular switch 6 Amp single pole one way-1 module, complete all as specified and directed.

S&F modular switch 20 Amp, single pole one way-2 module, complete all as specified and directed.

S&F modular socket outlet shuttered-6A-2/3 Pin-universal India 2 Module, complete all as specified and directed.

S&F modular socket outlet shuttered-6/16A-2/3 Pin Indian 2 Module, complete all as specified and directed.

S&F Fan step regulator 120W - 2 module, complete all as specified and directed.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of 1/1.50 Sqmm suitable size, complete all as specified and directed.

M&L for Modular Bell push 6 Amp 2 Module,complete all as specified and directed.

M&L in replacement of Bell AC 230Volts single Pole, complete all as specified and directed.

S&F in replacement LED 10 Watt fitting batten with decorative end cap complete with aluminium housing & integral electronic driver with tube 10 watt complete including connection with 1.5 Sqmm 2 core flexible copper cable, complete all as specified and directed.

S&F in replacement LED 10 watt surface mounted downlight of size 200mm dia with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency complete including connection with 1.5 Sqmm 2 core flexible copper cable, complete all as specified and directed.

S&F in replacement LED 15 watt surface mounted downlight of size 200mm dia with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency completeincl connection with 1.5 Sqmm 2 core flexible copper cable, complete all as specified and directed.

S&F in replacement LED 18 Watt fitting batten with decorative end cap complete with aluminium housing & integral electronic driver with tube 18 watt complete including connection with 1.5 Sqmm 2 core flexible copper cable, complete all as specified and directed.

S&F in replacement LED 20 Watt fitting batten with decorative end cap complete with aluminium housing & integral electronic driver with tube 20 watt complete including connection with 1.5 Sqmm 2 core flexible copper cable, complete all as specified and directed.

M&L in replacement for MCB TP&N distribution board suitable TPN 4 Way double door 415 Volts complete all as specified and directed.

S&F in replacement sheet metal enclosure for DBs 16 Way single Pole and Neutral with acrylic door having 200 Amps rated copper bus bar 240 Volts AC, complete all as specified and directed.

S&F in replacement sheet metal enclosure for DBs 12 Way single pole and neutral with acrylic door having 200 Amps rated copper bus bar 240 Volts AC, complete all as specified and directed.

S&F in replacement sheet metal enclosure for DBs 08 Way single pole and neutral with acrylic door having 200 Amps rated copper bus bar 240 Volts AC, complete all as specified and directed.complete

S&F in replacement MCB TPN 63 Amps breaking capacity 10KA , 415 Volt, complete all as specified and directed.

S&F in replacement MCB SPN 20 to 63 Amps breaking capacity 10kA to 25kA , 220- 230 Volt, complete all as specified and directed.

S&F in replacement MCB SP 06 tp 32 Amps breaking capacity 10KA , 220-230 Volt, complete all as specified and directed.

S&F in replacement lamp holder PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate, isolated body, complete all as specified and directed.

M&L for sub main wiring using 4 run of 10 sqmm and 2 run of 10 sqmm PVC insulated unsheathed FRLSH multistranded copper conductor cable ISI marked 1100 V grade in existing concealed PVC conduit fixed in wall/floor,passing through wall/ceiling, including taking down old unserviceable cable complete all as specified and directed.

M&L for sub main wiring 2x4.0 sqmm and 1x4 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade in PVC in existing concealed PVC conduit or fixed in wall/floor,passing through wall/ceiling, including taking down old unserviceable cable complete all as specified and directed.

M&L in replacement sub main wiring 2x6.0 sqmm and 1x6 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade in existing PVC concealed conduit or fixed in wall/floor,passing through wall/ceiling, complete all as specified and directed.

M&L in replacement sub main wiring 2x10 sqmm and 1x10 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade in existing PVC conduit fixed in wall/floor,passing through wall/ceiling, complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 25x4 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.Angle iron frame made of 40x40x4 mm angle iron for 30x30 cm PCC pit for holding the pit cover and Apply two coat of syntheticnenamel paint over one coat of red oxide zinc chrome primer on exposed steel surfaces and two coat of hot tar on embedded portion of steel surfaces

M&L Galvanised iron strip 25x4mm buried in ground including necessay excavation & earth work in soft/loose soil and removal of excavated naterial n. exc 50m and depositing where directed. Complete all as specified and directed.

S&F in repair MCCB Four pole 400 Amps 36KA, complete all as specified and directed.

S&F in repair MCCB Four pole 250 Amps 36KA, complete all as specified and directed.

S&F in repair MCCB Four pole 160 Amps 36KA complete all as specified and directed.

S&F in repair MCCB Four pole 100 Amps 25KA, complete all as specified and directed.

S&F PVC conduit 25mm dia including fittings/accessories concealed in wall including cutting chasing and making good to disturb surfaces, complete all as specified and directed.

S&F in replacement of PVC Sheathed copper cable 1.5 Sqmm 3 core, complete all as specified and directed.

S&F in replacement of PVC Sheathed copper cable 2.5 Sqmm 3 core, complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in PVC casing & caping double lock including fixures and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and directed.

All description as per srl item No 73 here- in- before but using cable size 1.5 Sqmm for 1 Nos 05 Amps Socket outlet independent with terminal boxes, Moduler fittings including acessories as moduler surface cover plate with frame, metal flush box, complete all as specified and directed.

All as per srl item No 73 here- in- before but using cable size 2.5 Sqmm for 15 Amps Socket outlet terminal boxes for Modular switches including acessories as moduler surface cover plate with frame, metal flush box with 2.5 sqmm earth wire complete all as specified and dierected.

S&F in replacement of switch piano type flush type single pole one way 5 Amps, complete all as specified and directed.

S&F in replacement of socket outlet 2 in one 3 Pin 5 Amps, complete all as specified and directed.

S&F in replacement of switch piano type flush type single pole one way 15 Amps, complete all as specified and directed.

S&F in replacement of socket outlet 2 in one 3 Pin 5 & 15 Amps, complete all as specified and directed.

S&F in replacement of modular cover plate with frame 3 module, complete all as specified and directed.

S&F in replacement of modular cover plate with frame 4 module, complete all as specified and directed.

S&F in replacement of modular cover plate with frame 6 module, complete all as specified and directed.

S&F in replacement of modular cover plate with frame 8 module, complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in existing PVC counduit including fixures and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point, complete all as specified and directed.

All description as per srl item No 84 here- in- before but using cable size 1.5 Sqmm for 1 Nos 05 Amps Socket outlet independent with terminal boxes, Moduler fittings including acessories as moduler surface cover plate with frame, metal flush box, complete all as specified and dierected.

All as per srl item No 84 here- in- before but using cable size 2.5 Sqmm for 15 Amps Socket outlet terminal boxes for Modular switches including acessories as moduler surface cover plate with frame, metal flush box with 2.5 sqmm earth wire, complete all as specified and directed.

S&F GI Wire 4 mm dia for connecting earthing, complete all as specified and directed.

Supply and fixing electric round sheet with superior finish white colour of size 4 inch complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil for laying UG cables of various sizes, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc25 cm in any type of soil, complete all as specified and directed.

Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed.

Supply and lay in trenches burnt brick sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable complete all as specified and directed.

Supply and spread clean dry river sand in trenches ,ducts including leveling, punning for cushioning of cables all as specified. Note : Punned thickness of sand cushioning shall be measured.

Supply and lay in trenches, fixed to wall / pole/ tray etc UG cable XLPE insulated armoured heavy duty electric UG cable with aluminum conductor 1100 volts grade of cross sectional area of following size, complete all as specified and directed.

(a) 10 Sqmm 2 Core

(a) 16 Sqmm 4 Core

(b) 25 Sqm 3.5 Core

(c) 35 Sqm 3.5 Core

M&L in Replacement of GI bracket made of 40 mm medium grade GI pipe bend to shape approx 1.2 mtr length incl Clamp, nut, bolt, washer etc complete for fixing of street light.

S&F Junction box SMC KIOSK box water proof of size 140x140x95 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole, complete all as specified and directed.

S&F Junction box SMC KIOSK box water proof of size 300x200x125 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole, complete all as specified and directed

S&F Copper cable 2.5 Sqm 3 core PVC sheathed multi core for connection of street light inserting from top in side the pole and connecting in junction box complete including making Hole in Pole as per Site, complete all as specified and directed.

M & L for PCC (1:2:4) type B2 using 20 mm graded stone aggregate for coping of pole around pole, complete all as specified and directed.

S&F LED Post Top Lantern 25W wall luminaire with diffuser and painted spun aluminium deflector including taking down old unserviceable complete all as specified and directed.

S&F in Replacement of LED Post Top Bollard light 10 W including nesessory excavation and PCC work for fixing, complete all as specified and directed.

S&F in replacement of Powder coated pressure die cast aluminium SMD LED street light with heat resistant toughened glass of capacity 45 Watt including taking down old unserviceable, complete all as specified and directed

S&F Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 70 Watt including taking down old unserviceable complete all as specified and directed

S&F Powder coated pressure die cast aluminium SMD LED street light with heat resistant toughened glass of capacity 90 Watt including taking down old unserviceable complete all as specified and directed.

S&F Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 120 Watt including taking down old unserviceable, complete all as specified and directed.

S&F LED flood light with pressure die cast aluminium housing 100 Watt completed with connection including taking down old unserviceable. complete all as specified and directed.

S&F LED flood light with pressure die cast aluminium housing 150 Watt completed with connection including taking down old unserviceable, complete all as specified and directed.

S&F LED flood light with pressure die cast aluminium housing 200 Watt completed with connection including taking down old unserviceable, complete all as specified and directed.

S&F in replacement of driver for 45 W LED street light fitting, complete all as specified and directed.

S&F in replacement of driver for 75 W LED street light fitting, complete all as specified and directed.

S&F in replacement of driver for 100W LED street light fitting complete all as specified and directed.

S&F in replacement of driver for 150W LED street light fitting complete all as specified and directed

S&F LED Flood Light 250 watt with pressure die cast aluminium housing complete with all accessories, complete all as specified and directed.

S&F in replacement GI pipe light grade 50mm dia for laying of protection of UG cable complete all as specified and directed.

S&F in replacement GI pipe light grade 40mm dia for laying of protection of UG cable complete all as specified and directed.

Supply and Fixing in replacement of Timer switch Astronomical type ,415 Volt three Phase of 63 Amps rating with Three Pole ML-4 contactor incl one Toggle switch for Auto, off and Manual function and incomming MCB TP internally pre wired complete and Fitted inside steel enclosure all as per site requirement, complete all as specified and directed

S&F in replacement service cable 1100 volts grade heavy duty PVC insulated aluminium multistranded conductor served with inner sheathing of size 10 Sqmm 2 Core complete including taling down of old burnt cable complete all as specified and directed

Continental Engineers and contractors

Sumit Enterprises